This paper presents the Remote Device Access (RDA) package developed at CERN in the framework of the joint PS/SL Controls Middleware project. The package design reflects the Accelerator Device Model in which devices, named entities in the control system, can be controlled via properties. RDA implements this model in a distributed environment with devices residing in servers that can run anywhere in the controls network. It provides a location-independent and reliable access to the devices from control programs. By invoking the device access methods, clients can read, write and subscribe to device property values. We describe the architecture and design of RDA, its API, and CORBA-based implementations in Java and C++. First applications of RDA in the CERN accelerator control systems are described as well.
This report presents the proceedings of the Course on Advanced Accelerator Physics organized by the CERN Accelerator School. The course was held in Trondheim, Norway from 18 to 29 August 2013, in collaboration with the Norwegian University of Science and Technology. Its syllabus was based on previous courses and in particular on the course held in Berlin 2003 whose proceedings were published as CERN Yellow Report CERN- 2006-002. The field has seen significant advances in recent years and some topics were presented in a new way and other topics were added. The lectures were supplemented with tu…
This report contains the proceedings of the Workshop on Accelerator Magnet Superconductor, Design and Optimization (WAMSDO) held at CERN from 15 to 16 January 2013. This fourth edition of the WAMSDO workshop is focussed on aspects related to quench protection.
These proceedings collate lectures given at the twenty-seventh specialized course organised by the CERN Accelerator School (CAS). The course was held at the Ettore Majorana Foundation and Centre for Scientific Culture (EMFCSC) in Erice, Italy, from 24 April to 4 May 2013. Following recapitulation lectures on basic accelerator physics and superconductivity, the course covered topics related to the design, production and operation of superconducting RF systems and superconducting magnets for accelerators. The participants pursued one of six case studies in order to get 'hands-on' experience of t…
These proceedings collate lectures given at the twenty-fifth specialized course organised by the CERN Accelerator School (CAS). The course was held in Bilbao, Spain from 24 May to 2 June 2011, in collaboration with ESS Bilbao. The course covered the background accelerator physics, different types of particle accelerators and the underlying accelerator systems and technologies, all from the perspective of high beam power. The participants pursued one of six case studies in order to get "hands-on" experience of the issues connected with high power machines.
These proceedings present the lectures given at the twenty-fourth specialized course organized by the CERN Accelerator School (CAS). The course was held in Ebeltoft, Denmark, from 8-17 June, 2010 in collaboration with Aarhus University, with the topic 'RF for Accelerators' While this topic has been covered by CAS previously, early in the 1990s and again in 2000, it was recognized that recent advances in the field warranted an updated course. Following introductory courses covering the background physics, the course attempted to cover all aspects of RF for accelerators; from RF power generation…
These proceedings collate lectures given at the twenty-eighth specialized course organised by the CERN Accelerator School (CAS). The course was held at the Hotel du Parc, Baden, Switzerland from 7 - 14 May 2014, in collaboration with the Paul Scherrer Institute. Following introductory lectures on accelerators and the requirements on power converters, the course covered components and topologies of the different types of power converters needed for particle accelerators. Issues of design, control and exploitation in a sometimes-hostile environment were addressed. Site visits to ABB and PSI prov…
These proceedings collate lectures given at the twenty-sixth specialized course organised by the CERN Accelerator School (CAS). The course was held in Senec, Slovakia from 29 May to 8 June 2012, in collaboration with the Slovak University of Technology, Bratislava. Following lectures on the background accelerator physics and the fundamental processes underlying the production of particle beams, the course covered the different types of ion sources and associated technological issues, and different applications for which sources are used. The participants pursued one of six case studies in orde…
These proceedings are of interest to staff and students in accelerator laboratories, university departments and companies working in or having an interest in the field of new acceleration techniques. Following introductory lectures on plasma and laser physics, the course covers the different components of a plasma wake accelerator and plasma beam systems. Topical seminars and an overview about alternative new techniques like dielectric accelerators are included. Lectures on the experimental studies and their latest results, on diagnostic tools and state of the art wake acceleration facilities,…
These proceedings collate lectures given at the course on Accelerators for Medical Applications, organised by the CERN Accelerator School (CAS). The course was held at the Eventhotel Pyramide, Vösendorf, Austria from 26 May to 5 June, in collaboration with MedAustron. Following introductory lectures on radiobiological and oncological issues, the basic requirements on accelera- tors and beam delivery are reviewed. The medical applications of linear accelerators, cyclotrons and synchrotrons are then be treated in some detail, followed by lectures on the production and use of radioisotopes and a …
Simon van der Meer was a brilliant scientist and a true giant in the field of accelerators. His seminal contributions to accelerator science are essential to this day in our quest to satisfy the demands of modern particle physics. Whether we are talking of long-baseline neutrino physics or antiproton-proton physics at CERN and Fermilab, or proton-proton physics at the LHC, his techniques and inventions have been a vital and necessary part of modern-day successes. Simon van der Meer and Carlo Rubbia were the first CERN scientists to become Nobel laureates in Physics in 1984. His less well-known…
The field of plasma-based particle accelerators has seen tremendous progress over the past decade and experienced significant growth in the number of activities. During this process, the involved scientific community has expanded from traditional university-based research and is now encompassing many large research laboratories worldwide, such as BNL, CERN, DESY, KEK, LBNL and SLAC. As a consequence, there is a strong demand for a consolidated effort in education at the intersection of accelerator, laser and plasma physics. The CERN Accelerator School on Plasma Wake Acceleration has been organ…
In view of the implementation of beam-monitoring sensors for CERN's Large Hadron Collider (LHC), and also in order to validate Thermoluminescence Detectors as a versatile tool to measure ionizing radiation doses in mixed fields at hadron colliders such as the LHC, chemical vapor deposition diamond sensors have been evaluated and calibrated at CERN's Proton Synchrotron accelerator. Special attention was paid to understanding whether lithiumfluoride thermoluminescence detectors are suitable as measuring devices in these radiation fields.
Several indicators have pointed to the presence of an Electron Cloud (EC) in some of the CERN accelerators, when operating with closely spaced bunched beams. In particular, spurious signals on the pick ups used for beam detection, pressure rise and beam instabilities were observed at the Proton Synchrotron (PS) during the last stage of preparation of the beams for the Large Hadron Collider (LHC), as well as at the Super Proton Synchrotron (SPS). Since the LHC has started operation in 2009, typical electron cloud phenomena have appeared also in this machine, when running with trains of closely …
These proceedings present the lectures given at the twenty-third specialized course organized by the CERN Accelerator School (CAS), the topic being 'Magnets'. The course was held in Bruges, Belgium, from 16 to 25 June 2009. This is the first time this topic has been selected for a specialized course. Taking into account the number of related applications currently in use in accelerators around the world, but, even more important, the worrying decrease in the corresponding expertise in the different laboratories, it was recognized that such a topic should definitively be incorporated into the C…
This report sums up in two volumes the first 50 years of operation of the CERN Proton Synchrotron. After an introduction on the genesis of the machine, and a description of its magnet and powering systems, the first volume focuses on some of the many innovations in accelerator physics and instrumentation that it has pioneered, such as transition crossing, RF gymnastics, extractions, phase space tomography, or transverse emittance measurement by wire scanners. The second volume describes the other machines in the PS complex: the proton linear accelerators, the PS Booster, the LEP pre-injector, …
Space charge is typically one of the performance limitations for the operation of high intensity and high brightness beams in circular accelerators. In the Proton Synchrotron (PS) at CERN, losses are observed for vertical tunes above $Q_y=6.25$, especially for beams with large space charge tune shift. The work presented here shows that this behaviour is associated to structure resonances excited by space charge due to the highly symmetric accelerator lattice of the PS, typical for first generation alternating gradient synchrotrons. Experimental studies demonstrate the dependency of the losses …
Superconducting niobium film cavities deposited on copper substrates (Nb/Cu) have suffered from strong field-dependent surface resistance, often referred to as the Q-slope problem, since their invention. We argue that the Q-slope may not be an intrinsic problem, but rather originates from a combination of factors which can be revealed in appropriate environmental conditions. In this study, extrinsic effects were carefully minimized in a series of experiments on a seamless cavity. The origin of the Q-slope in low frequency cavities is traced back to two contributions with different temperature …
John Adams acquired an unrivalled reputation for his leading part in designing and constructing the Proton Synchrotron (PS) in CERN's early days. In 1968, and after several years heading a fusion laboratory in the UK, he came back to Geneva to pilot the Super Proton Synchrotron (SPS) project to approval and then to direct its construction. By the time of his early death in 1984 he had built the two flagship proton accelerators at CERN and, during the second of his terms as Director-General, he laid the groundwork for the proton-antiproton collider which led to the discovery of the intermediate…
The beam aperture of a particle accelerator defines the clearance available for the circulating beams and is a parameter of paramount importance for the accelerator performance. At the CERN Large Hadron Collider (LHC), the knowledge and control of the available aperture is crucial because the nominal proton beams carry an energy of 362 MJ stored in a superconducting environment. Even a tiny fraction of beam losses could quench the superconducting magnets or cause severe material damage. Furthermore, in a circular collider, the performance in terms of peak luminosity depends to a large extent o…
In view of a possible evolution of the CERN accelerator complex towards higher proton intensities, a 2.2 GeV H- linac with 4 MW beam power has been designed, for use in connection with an accumulator and compressor ring as proton driver of a muon-based Neutrino Factory. The high-energy part of this linac can use most of the RF equipment (superconducting cavities and klystrons) from the LEP collider after its decommissioning at the end of 2000. Recent results concerning low-beta superconducting cavities are presented, and the main characteristics of the linac design are described. The complete …
The paper gives an overview of the principles of particle accelerators and their historical development. After introducing the basic concepts, the main emphasis is on sketching the layout of modern storage rings and discussing their limitations in terms of energy and machine performance. Examples of existing machines, among them the Large Hadron Collider (LHC) at CERN, demonstrate the basic principles of and the technical and physical limits that we face in the design and operation of particle colliders. The push for ever higher beam energies motivates the design of future colliders as well as…
The paper gives a short overview of the principles of particle accelerators, their historical development and the typical performance limitations. After an introduction to the basic concepts, the main emphasis is to sketch the layout of modern storage rings and their limitations in energy and machine performance. Examples of existing machines - among them clearly the LHC at CERN - demonstrate the basic principles and the technical and physical limits that we face today in the design and operation of these particle colliders. Pushing for ever higher beam energies motivates the design of the fut…
CERN has launched a study phase to evaluate the feasibility of a new high-intensity beam dump facility at the CERN Super Proton Synchrotron accelerator with the primary goal of exploring Hidden Sector models and searching for Light Dark Matter, but which also offers opportunities for other fixed target flavour physics programs such as rare tau lepton decays and tau neutrino studies. The new facility will require - among other infrastructure - a target complex in which a dense target/dump will be installed, capable of absorbing the entire energy of the beam extracted from the SPS accelerator. I…
During the CERN Accelerator School 'Superconductivity for accelerators', the students were divided into 18 groups, and 6 different exercises (case studies), involving the design and analysis of superconducting magnets and RF cavities, were assigned. The problems covered a broad spectrum of topics, from properties of superconducting materials to operation conditions and general dimensions of components. The work carried out by the students turned out to be an extremely useful opportunity to review the material explained during the lectures, to become familiar with the orders of magnitude of the…
The upgrade of the normal conducting (NC) Radioactive Ion Beam EXperiment (REX)-ISOLDE heavy ion accelerator at CERN, under the High Intensity and Energy (HIE)-ISOLDE framework, proposes the use of superconducting (SC) quarter-wave resonators (QWRs) to increase the energy capability of the facility from 3 MeV/u to beyond 10 MeV/u. A beam dynamics study of a lattice design comprising SC QWRs and SC solenoids has confirmed the design's ability to accelerate ions, with a mass-to-charge ratio in the range 2.5 < A/q < 4.5, to the target energy with a minimal emittance increase. We report on the dev…
The emergence of the ISR project at CERN is described in the light of the situation at CERN at the end of the 1950s when the CERN Proton Synchrotron (PS) was still under construction. The discussions leading to the project are put into context with world-wide efforts to build larger and more powerful accelerators at that time; the evolution of the project before approval is sketched. The basic design considerations and the most significant technological choices are explained. The construction period is summarized by highlighting important milestones and the performance achieved during commissi…
Los Alamos is currently developing novel particle accelerator controls and diagnostics algorithms to enable higher quality beams with lower beam losses than is currently possible. The purpose of this workshop was to consider tuning and optimization challenges of a wide range of particle accelerators including linear proton accelerators such as the Los Alamos Neutron Science Center (LANSCE), rings such as the Advanced Photon Source (APS) synchrotron, free electron lasers (FEL) such as the Linac Coherent Light Source (LCLS) and LCLS-II, the European X-ray Free Electron Laser (EuXFEL), the Swiss …
Multi-objective optimization is important for particle accelerators where various competing objectives must be satisfied routinely such as, for example, transverse emittance vs bunch length. We develop and demonstrate an online multi-time scale multi-objective optimization algorithm that performs real time feedback on particle accelerators. We demonstrate the ability to simultaneously minimize the emittance and maintain a reference trajectory of a beam in the electron beamline in CERN's Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE).
Massive neutrinos reveal physics beyond the Standard Model, which could have deep consequences for our understanding of the Universe. Their study should therefore receive the highest level of priority in the European Strategy. The discovery and study of leptonic CP violation and precision studies of the transitions between neutrino flavours require high intensity, high precision, long baseline accelerator neutrino experiments. The community of European neutrino physicists involved in oscillation experiments is strong enough to support a major neutrino long baseline project in Europe, and has a…
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e$^+$e$^-$-collider under development by the CLIC accelerator collaboration, hosted by CERN. The CLIC accelerator has been optimised for three energy stages at centre-of-mass energies 380 GeV, 1.5 TeV and 3 TeV. CLIC uses a novel two-beam acceleration technique, with normal-conducting accelerating structures operating in the range of 70-100 MV/m. The report describes recent achievements in accelerator design, technology development and prototyping, system tests and beam tests. Large-scale CLIC-specific beam tests have tak…
SPES (Study for the Production of Exotic Species) is a LNL project that will produce by the end of this year the conceptual design of a specialized facility for Radioactive Ion Beam (RIB) originated by fission fragments produced by secondary neutrons; this facility will be characterized by moderate size, performance and cost and will allow to produce also intense neutron beams for activities both in fundamental and applied Nuclear Physics [1]. In the context of this design study and tightly related to medium size of this facility the architecture of a distributed control system using the Commo…
In this paper, we discuss an experimental layout for the two-crystals scenario at the Super Proton Synchrotron (SPS) accelerator. The research focuses on a fixed target setup at the circulating machine in a frame of the Physics Beyond Colliders (PBC) project at CERN. The UA9 experiment at the SPS serves as a testbench for the proof of concept, which is planning to be projected onto the Large Hadron Collider (LHC) scale. The presented in the text configuration was used for the quantitative characterization of the deflected particle beam by a pair of bent silicon crystals. For the first time in …
The design of a primary electron beam facility at CERN is described. The study has been carried out within the framework of the wider Physics Beyond Colliders study. It re-enables the Super Proton Synchrotron (SPS) as an electron accelerator, and leverages the development invested in Compact Linear Collider (CLIC) technology for its injector and as an accelerator research and development infrastructure. The facility would be relevant for several of the key priorities in the 2020 update of the European Strategy for Particle Physics, such as an electron-positron Higgs factory, accelerator R\&D, …
This paper aims to give non-expert engineers and scientists working in the domain of accelerators a general introduction to the main disciplines and technologies involved in the design and construction of accelerator cryostats. Far from being an exhaustive coverage of these topics, an attempt is made to provide simple design and calculation rules for a preliminary design of cryostats. Recurrent reference is made to the Large Hadron Collider magnet cryostats, as most of the material presented is taken from their design and construction at CERN.
