The dynamics of light in Fabry-Perot cavities with varying length and input laser frequency are analyzed and the exact condition for resonance is derived. This dynamic resonance depends on the light transit time in the cavity and the Doppler effect due to the mirror motions. The response of the cavity to length variations is very different from its response to laser frequency variations. If the frequency of these variations is equal to multiples of the cavity free spectral range, the response to length is maximized while the response to the laser frequency is zero. Implications of these results for the detection of gravitational waves using kilometer-scale Fabry-Perot cavities are discussed.
We discuss the parametric oscillatory instability in a Fabry-Perot cavity of the Einstein Telescope. Unstable combinations of elastic and optical modes for two possible configurations of gravitational wave third-generation detector are deduced. The results are compared with the results for gravita- tional wave interferometers LIGO and LIGO Voyager.
In this paper we revisited the theory of selective reflection from a dilute vapor cell. A self-consistent theory was developed for reflection spectrum for Fabry-Perot interferometer. Formulas for single and multiple reflections were obtained. We also obtained the effective refractive index for a single selective reflection. The results of the paper are in a good agreement with existing experimental results.
The use of negative index materials is highly efficient for tayloring the spectral dispersion properties of a quarter-wavelength Bragg mirror and for obtaining a resonant behavior of a multilayer Fabry-Perot cavity over a very large spectral range. An optimization method is proposed and validated on some first promising devices.
We address the response of a Fabry-Perot interferometer to a monochromatic point source. We calculate the anticaustics (that is, the virtual wavefronts of null path difference) resulting from the successive internal reflections occurring in the system. They turn to be a family of ellipsoids (or hyperboloids) of revolution, which allows us to reinterpret the operation of the Fabry-Perot from a geometrical point of view that facilitates comparison with other apparently disparate arrangements, such as Young's double slit.
An anisotropic photonic crystal containing two anisotropic defect layers is considered. It is demonstrated that the system under can support a Fabry-Perot bound state in the continuum (FP-BIC). A fully analytic solution of the scattering problem as well as a condition for FP-BIC have been derived in the framework of the temporal coupled-mode theory.
The complex reflected and transmitted amplitudes from a Fabry-Perot interferometer are analyzed using a phase-space approach, in which the real and imaginary parts of those amplitudes are taken as basic variables. As functions of the optical path length of the cavity, the reflected amplitude describes a circle, whereas the transmitted is given by a hippopede. The system performance can be directly related to the geometrical parameters of these curves.
A Mach-Zehnder interferometer with absorbing Fabry-Pérot cavities is used to measure the optical phase differences upon rotation around a vertical axis. The details of the expected experimental results are described based on the idea that a conducting medium can introduce phase differences due to changes in material conductivity that are expected to occur when a medium moves with respect to a reference frame. Experimental details and results are discussed.
The method of images, when applied to an opto-mechanical Fabry-Perot resonator with a heavy, charged mirror, and a light, charged mirror that can be driven into motion, reveals that the highest order images can move relativistically when the Q of the superconducting resonator is on the order of 10^10. The implications of such relativistic motions of the charge and mass of these images to the emission of electromagnetic and gravitational radiation within the resonator is explored.
In this paper we present a theoretical and experimental study of the dynamical behaviour of birefringent cavities. Our experimental data show that usual hypothesis which provides that a Fabry-Perot cavity is a first-order low pass filter cannot explain the behaviour of a birefringent cavity. We explain this phenomenon, and give the theoretical expression of the equivalent cavity filter which corresponds to a second-order low pass filter.
We demonstrate passive harmonic mode-locking of a quantum well laser diode designed to support a discrete comb of Fabry-Perot modes. Spectral filtering of the mode spectrum was achieved using a non-periodic patterning of the cavity effective index. By selecting six modes spaced at twice the fundamental mode spacing, near-transform limited pulsed output with 2 ps pulse duration was obtained at a repetition rate of 100 GHz.
Various four-mirror optical resonators are studied in the perspective of realizing passive stacking cavities. A comparative study of the mechanical stability is provided. The polarization properties of the cavity eigenmodes are described and it is shown that the effect of mirror misalignments (or motions) induces polarization and stacking power instabilities. These instabilities increase with the finesse of the Fabry-Perot cavity. A tetrahedral configuration of the four mirrors is found to minimize the consequences of the mirrors's motion and misalignment by reducing the instability parameter …
A new set of vector solutions to Maxwell's equations based on solutions to the wave equation in spheroidal coordinates allows laser beams to be described beyond the paraxial approximation. Using these solutions allows us to calculate the complete first-order corrections in the short-wavelength limit to eigenmodes and eigenfrequencies in a Fabry-Perot resonator with perfectly conducting mirrors. Experimentally relevant effects are predicted. Modes which are degenerate according to the paraxial approximation are split according to their total angular momentum. This includes a splitting due to co…
We propose to take advantage of the properties of long Josephson junctions to realize a frequency variable Fabry-Perot Filter that operates in the range 100-500 GHz with a bandwidth below 1 GHz. In fact, we show that it is possible to exploit the tunability of the effective impedance of the Josephson component, that is controlled by a dc bias, to tune, up to $10\%$ of the central frequency, the resonance of the system. An analysis of the linearized system indicates the range of operation and the main characteristic parameters Numerical simulations of the full nonlinear Josephson element confir…
A key issue in developing pendular Fabry-Perot interferometers as very accurate displacement measurement devices, is the noise level. The Fabry-Perot pendulums are the most promising device to detect gravitational waves, and therefore the background and the internal noise should be accurately measured and reduced. In fact terminal masses generates additional internal noise mainly due to thermal fluctuations and vibrations. We propose to exploit the reflectivity change, that occurs in some special points, to monitor the pendulums free oscillations and possibly estimate the noise level. We find …
A temporal boundary refers to a specific time at which the properties of an optical medium are abruptly changed. When light interacts with the temporal boundary, its spectral content can be redistributed due to the breaking of continuous time-translational symmetry of the medium where light resides. In this work, we use this principle to demonstrate, at terahertz (THz) frequencies, the resonance-enhanced spectral funneling of light coupled to a Fabry-Perot resonator with a temporal boundary mirror. To produce a temporal boundary effect, we abruptly increase the reflectance of a mirror constitu…
Symmetry-Broken Cavity Solitons and Collective Polarization Conformity in Fabry-Perot Kerr Resonators
Université Bourgogne Europe（勃艮第欧洲大学）；CNRS（法国国家科学研究中心）；Max Planck Institute for the Science of Light（马克斯·普朗克光科学研究所）；Friedrich Alexander University Erlangen-Nuremberg（埃尔兰根-纽伦堡弗里德里希·阿历山大大学）；Alexandria University（亚历山大大学）；Huazhong University of Science and Technology（华中科技大学）；University of Strathclyde（思克莱德大学）；The University of Auckland（奥克兰大学）
The factors limiting the resolution of displacement sensor based on extrinsic Fabry-Perot interferometer were studied. An analytical model giving the dependency of EFPI resolution on the parameters of an optical setup and a sensor interrogator was developed. The proposed model enables one to either estimate the limit of possible resolution achievable with a given setup, or to derive the requirements for optical elements and/or a sensor interrogator necessary for attaining the desired sensor resolution. An experiment supporting the analytical derivations was performed, demonstrating a large dyn…
Optical nanofiber cavity research has mainly focused on the fundamental mode. Here, a Fabry-Pérot fiber cavity with an optical nanofiber supporting the higher-order modes, TE01, TM01, HE21o, and HE21e, is demonstrated. Using cavity spectroscopy, with mode imaging and analysis, we observe cavity resonances that exhibit complex, inhomogeneous states of polarization with topological features containing Stokes singularities such as C-points, Poincaré vortices, and L-lines. In situ tuning of the intracavity birefringence enables the desired profile and polarization of the cavity mode to be obtained…
We study the effect of finite size and misalignment on a fundamental optomechanical setup: a Fabry-Pérot cavity with one fixed and one moveable mirror. We describe in detail light confinement under these real world imperfections and compare the behaviour of the intracavity and output fields to the well-known ideal case. In particular, we show that it is possible to trace the motion of the movable mirror itself by measuring intensity changes in the output field even in the presence of fabrication shortcomings and thermal noise. Our result might be relevant to the transition from high precision …
In this letter, we demonstrate for the first time that by combining the effects of the Wood-Rayleigh Anomaly (WRA) and the Fabry-Perot (FP) resonance, transmission efficiencies of $1$D metallo-dielectric gratings on substrates can be significantly improved compared to when these two phenomena work separately. Results of combining the WRA and the FP resonance can be utilized to eliminate the necessity of using the index matching technique and the core-shell structure for enhancing the performance of extraordinary optical transmission devices. Further, the outcomes of combining the WRA and the F…
Lasers stabilized to vacuum-gap Fabry-Pérot optical reference cavities display extraordinarily low noise and high stability, with linewidths much less than 1 Hz. These lasers can expand into new applications and ubiquitous use with the development of compact, portable cavities that are manufacturable at scale. Here we demonstrate an 8 mL volume Fabry-Pérot cavity constructed with mirrors that are fabricated lithographically with finesse near 1 million. A laser locked to the cavity exhibits phase noise limited by the cavity thermal noise for offset frequencies ranging from 1 Hz to $\approx$ 1 k…
We measured the far-field emission patterns in three dimensions of flat organic dye microlasers using a solid angle scanner. Polymer-based microcavities of ribbon shape (i.e., Fabry-Perot type) were investigated. Out of plane emission from the cavities was observed, with significant differences for the two cases of resonators either fully supported by the substrate or sustained by a pedestal. In both cases, the emission diagrams are accounted for by a model combining diffraction at the cavity edges and reflections from the substrate.
The polarization exchange effect in a twisted-nematic Fabry-Pérot resonator is experimentally confirmed in the regimes of both uniform and electric-field-deformed twisted structures. The polarization of output light in the transmission peaks is shown to be linear rather than elliptical. The polarization deflection from the nematic director grows from $0^\circ$ to $90^\circ$ angle and exchanges the longitudinal and transverse directions. Untwisting of a nematic by a voltage leads to the rotation of the polarization plane of light passing through the resonator. The polarization exchange effect a…
Free-running Fabry-Perot lasers normally operate in a single-mode regime until the pumping current is increased beyond the single-mode instability threshold, above which they evolve into a multimode state. As a result of this instability, the single-mode operation of these lasers is typically constrained to few percents of their output power range, this being an undesired limitation in spectroscopy applications. In order to expand the span of single-mode operation, we use an optical injection seed generated by an external-cavity single-mode laser source to force the Fabry-Perot quantum cascade…
We present a method to engineer the frequency splitting of polarization eigenmodes in fiber Fabry-Perot (FFP) cavities. Using specific pattern of multiple CO$_2$ laser pulses, we machine paraboloidal micromirrors with controlled elliptical shape in a large range of radius of curvature. This method is versatile and can be used to produce cavities with maximized or near-zero polarization mode splitting. In addition, we realize dual-wavelength FFP cavities with finesse exceeding $40\,000$ at 780$\,$nm and at 1559$\,$nm in the telecom range. We provide direct evidence that the birefringent frequen…
Anomalous spectral shift of transmission peaks is observed in a Fabry--Pérot cavity filled with a chiral anisotropic medium. The effective refractive index value resides out of the interval between the ordinary and the extraordinary refractive indices. The spectral shift is explained by contribution of a geometric phase. The problem is solved analytically using the approximate Jones matrix method, numerically using the accurate Berreman method and geometrically using the generalized Mauguin--Poincaré rolling cone method. The $o$-mode blue shift is measured for a 4-methoxybenzylidene-4'-$n$-but…
We report on measurements and modeling of the mode structure of tunable Fabry-Pérot optical microcavities with imperfect mirrors. We find that non-spherical mirror shape and finite mirror size lead to loss, mode deformation, and shifted resonance frequencies at particular mirror separations. For small mirror diameters, the useful cavity length is limited to values significantly below the expected stability range. We explain the observations by resonant coupling between different transverse modes of the cavity and mode-dependent diffraction loss. A model based on resonant state expansion that t…
Fabry-Pérot (FP) cavities are fundamental and ubiquitous optical elements frequently used in various sensing applications. Here, we introduce a general theoretical framework to study arbitrary light-cavity mode interactions for planar FPs and show how optical aberrations, intrinsic to the interrogating beam or due to imperfect cavities, reduce optical sensitivity by exciting higher-order spatial modes in the cavity. We find that particular Zernike aberrations play a dominant role in sensitivity degradation, and that the general loss of sensitivity can be significantly recovered by appropriate …
We perform a theoretical study of finesse limitations of a Fabry-Perot (FP) cavity occurring due to finite size, asymmetry, as well as imperfections of the cavity mirrors. A method of numerical simulations of the eigenvalue problem applicable for both the fundamental and high order cavity modes is suggested. Using this technique we find spatial profile of the modes and their round-trip diffraction loss. The results of the numerical simulations and analytical calculations are nearly identical when we consider a conventional FP cavity. The proposed numerical technique has much broader applicabil…
High finesse Fabry-Perot(FP) cavity is a very important frequency reference for laser stabiliza- tion, and is widely used for applications such as precision measurement, laser cooling of ions or molecules. But the non-linear response of the piezoelectric ceramic transducer (PZT) in the FP cav- ity limits the performance of the laser stabilization. Measuring and controlling such non-linearity are important. Here we report an in-situ, optical method to characterize this non-linearity by measuring the resonance signals of a dual-frequency laser. The differential measurement makes it insensitive t…
We address the response, both in amplitude and intensity, of a Fabry-Perot from a variety of viewpoints. These complementary pictures conspire to achieve a comprehensive and consistent theory of the operation of this system.
We experimentally demonstrate that the transmission though rolled-up metal/semiconductor hyperlenses can be enhanced at desired frequencies utilizing Fabry-Pérot resonances. By means of finite difference time domain simulations we prove that hyperlensing occurs at frequencies of high transmission.
One way of optically monitoring molecule concentrations is to utilise the high sensitivity of the transmission and reflection rates of Fabry-Perot cavities to changes of their optical properties. Up to now, intrinsic and extrinsic Fabry-Perot cavity sensors have been considered with analytes either being placed inside the resonator or coupled to evanescent fields on the outside. Here we show that Fabry-Perot cavities can also be used to monitor molecule concentrations non-invasively and remotely, since the reflection of light from the target molecules back into the Fabry-Perot cavity adds upwa…
We present a general and useful method to predict the existence, frequency, and spatial properties of gap states in photonic (and other) structures with a gapped spectrum. This method is established using the scattering approach. It offers a viewpoint based on a geometrical Fabry-Perot model. We demonstrate the capabilities of this model by predicting the behaviour of topological edge states in quasi-periodic structures. A proposition to use this model in Casimir physics is presented.
In this paper we describe a Fabry-Perot interferometer in the language of quantum optics. We go on to model the Fabry-Perot interferometer as a beam splitter having frequency dependent transmissivity and reflectivity coefficients. The antibunching, a totally non-classical effect, is to be expected if one excites this interferometer with carefully frequency-selected single photons arriving simultaneously from opposite directions. Contrary to a normal beam splitter, even slightly different frequency single photons should be able to show this effect, as long as the photon counters are not frequen…
This document records the results of a comparison of the interferometer simulation Finesse against an analytic (MATLAB based) calculation of the alignment sensing signals of a Fabry Perot cavity. This task was started during the commissioning workshop at the LIGO Livingston site between the 28.1. and 1.02 2013 with the aim of creating a reference example for validating numerical simulation tools. The FFT based simulation OSCAR joined the battle later.
Optical Fabry-Perot cavities always show a non-degeneracy of two orthogonal polarisation states. This is due to the unavoidable birefringence of dielectric mirrors whose effects are extremely important in Fabry-Perot based high-accuracy polarimeters. We have developed and present here a theory of the polarisation state dynamics in a birefringent Fabry-Perot resonator, and we validate it through measurements performed with the polarimeter of the PVLAS experiment. The measurements are performed while a laser is frequency-locked to the cavity, and provide values for the finesse of the cavity and …
We propose a novel photonic structure composed of metal nanolayer, Bragg mirror and metal nanolayer. The structure supports resonances that are transitional between Fabry-Perot and Tamm modes. When the dielectric contrast of the DBR is removed these modes are a pair of conventional Fabry-Perot resonances. They spectrally merge into a Tamm mode at high contrast. Such behavior differs from the results for structures supporting Tamm modes reported earlier. The optical properties of the structure in the frequency range of the DBR stop band, including highly beneficial 50% transmittivity through th…
We present the first demonstration of real-time closed-loop control and deterministic tuning of an independently suspended Fabry-Perot optical cavity using digitally-enhanced heterodyne interferometry, realising a peak sensitivity of $\sim$10 pm$/\sqrt{\mathrm{Hz}}$ over the 10-1000 Hz frequency band. The methods presented are readily extensible to multiple coupled cavities. As such, we anticipate that refinements of this technique may find application in future interferometric gravitational-wave detectors.
