A. R. Bahrampour, M. Vahedi, M. Abdi, R. Ghobadi, S. Tofighi, B. Parvin, M. Golshani
This paper has been withdrawn by the author due to a crucial sign error in equation 1.
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
继续探索
We discuss the parametric oscillatory instability in a Fabry-Perot cavity of the Einstein Telescope. Unstable combinations of elastic and optical modes for two possible configurations of gravitational wave third-generation detector are deduced. The results are compared with the results for gravita- tional wave interferometers LIGO and LIGO Voyager.
In this paper we revisited the theory of selective reflection from a dilute vapor cell. A self-consistent theory was developed for reflection spectrum for Fabry-Perot interferometer. Formulas for single and multiple reflections were obtained. We also obtained the effective refractive index for a single selective reflection. The results of the paper are in a good agreement with existing experimental results.
The use of negative index materials is highly efficient for tayloring the spectral dispersion properties of a quarter-wavelength Bragg mirror and for obtaining a resonant behavior of a multilayer Fabry-Perot cavity over a very large spectral range. An optimization method is proposed and validated on some first promising devices.
We address the response of a Fabry-Perot interferometer to a monochromatic point source. We calculate the anticaustics (that is, the virtual wavefronts of null path difference) resulting from the successive internal reflections occurring in the system. They turn to be a family of ellipsoids (or hyperboloids) of revolution, which allows us to reinterpret the operation of the Fabry-Perot from a geometrical point of view that facilitates comparison with other apparently disparate arrangements, such as Young's double slit.
An anisotropic photonic crystal containing two anisotropic defect layers is considered. It is demonstrated that the system under can support a Fabry-Perot bound state in the continuum (FP-BIC). A fully analytic solution of the scattering problem as well as a condition for FP-BIC have been derived in the framework of the temporal coupled-mode theory.
The complex reflected and transmitted amplitudes from a Fabry-Perot interferometer are analyzed using a phase-space approach, in which the real and imaginary parts of those amplitudes are taken as basic variables. As functions of the optical path length of the cavity, the reflected amplitude describes a circle, whereas the transmitted is given by a hippopede. The system performance can be directly related to the geometrical parameters of these curves.
A class of multiwavelength Fabry-Perot lasers is introduced where the spectrum is tailored through a non-periodic patterning of the cavity effective index. The cavity geometry is obtained using an inverse scattering approach and can be designed such that the spacing of discrete Fabry-Perot lasing modes is limited only by the bandwidth of the inverted gain medium. A specific two-color semiconductor laser with a mode spacing in the THz regime is designed, and measurements are presented demonstrating the simultaneous oscillation of the two wavelengths. The extension of the Fabry-Perot laser conce…
We report the first observation of a nonlinear mode in a cylindrical nonlinear Fabry-Perot cavity. The field enhancement from cavity buildup, as well as the large chi3 optical nonlinearity due to resonantly-excited Rb-85 vapor, allows the nonlinear mode to form at low incident optical powers of less than a milliwatt. The mode is observed to occur for both the self-focusing and self-defocusing nonlinearity.
The method of images, when applied to an opto-mechanical Fabry-Perot resonator with a heavy, charged mirror, and a light, charged mirror that can be driven into motion, reveals that the highest order images can move relativistically when the Q of the superconducting resonator is on the order of 10^10. The implications of such relativistic motions of the charge and mass of these images to the emission of electromagnetic and gravitational radiation within the resonator is explored.
In this paper we present a theoretical and experimental study of the dynamical behaviour of birefringent cavities. Our experimental data show that usual hypothesis which provides that a Fabry-Perot cavity is a first-order low pass filter cannot explain the behaviour of a birefringent cavity. We explain this phenomenon, and give the theoretical expression of the equivalent cavity filter which corresponds to a second-order low pass filter.
Optical transmission of a moving Fabry-Perot interferometer
本文在相对论框架下研究纵向运动法布里-珀罗干涉仪的光学透射，建立匀速时透射系数与速度的关系，并提出新型速度扫描及嵌套混合干涉方案。
We demonstrate passive harmonic mode-locking of a quantum well laser diode designed to support a discrete comb of Fabry-Perot modes. Spectral filtering of the mode spectrum was achieved using a non-periodic patterning of the cavity effective index. By selecting six modes spaced at twice the fundamental mode spacing, near-transform limited pulsed output with 2 ps pulse duration was obtained at a repetition rate of 100 GHz.
The dynamics of light in Fabry-Perot cavities with varying length and input laser frequency are analyzed and the exact condition for resonance is derived. This dynamic resonance depends on the light transit time in the cavity and the Doppler effect due to the mirror motions. The response of the cavity to length variations is very different from its response to laser frequency variations. If the frequency of these variations is equal to multiples of the cavity free spectral range, the response to length is maximized while the response to the laser frequency is zero. Implications of these result…
Modelling resonant transmission in a Fabry-Perot/Surface-Plasmon microcavity
提出用基本透射函数建模平面金属镜法布里-珀罗腔的表面等离激元共振，准确拟合随入射角与波长变化的实验透射率，并导出两种机制的共振条件。
We analyze an optical 3-port reflection grating by means of a scattering matrix formalism. Amplitude and phase relations between the 3 ports, i.e. the 3 orders of diffraction are derived. Such a grating can be used as an all-reflective, low-loss coupler to Fabry-Perot cavities. We derive the input output relations of a 3-port grating coupled cavity and find distinct properties not present in 2-port coupled cavities. The cavity relations further reveal that the 3-port coupler can be designed such that the additional cavity port interferes destructively. In this case the all-reflective, low-loss…
Switching waves-induced broadband Kerr frequency comb in fiber Fabry-Perot resonators
本文提出在正常色散区光纤法布里-珀罗谐振腔中通过激发切换波产生宽带克尔频率梳，结合Lugiato-Lefever方程理论分析与全光纤实验，实现了跨越15 THz带宽的频率梳。
Various four-mirror optical resonators are studied in the perspective of realizing passive stacking cavities. A comparative study of the mechanical stability is provided. The polarization properties of the cavity eigenmodes are described and it is shown that the effect of mirror misalignments (or motions) induces polarization and stacking power instabilities. These instabilities increase with the finesse of the Fabry-Perot cavity. A tetrahedral configuration of the four mirrors is found to minimize the consequences of the mirrors's motion and misalignment by reducing the instability parameter …
Low threshold optical bistability based on MoS2 in asymmetric Fabry-Perot cavity structure in visible light band
本文提出一种基于非线性双层MoS2和非对称光子晶体Fabry-Perot腔的多层结构，在可见光波段实现了a量级的低阈值光学双稳态，为全光开关和逻辑器件提供了新途径。
Coupling a Fabry-Pérot Cavity to a Single-Mode Optical Fiber Using a Metalens
本文研究利用超透镜实现高精细度法布里-珀罗腔与单模光纤的高效耦合，分析了对准误差灵敏度，并展示了1650 nm单片低温兼容光纤耦合腔设计。
A new set of vector solutions to Maxwell's equations based on solutions to the wave equation in spheroidal coordinates allows laser beams to be described beyond the paraxial approximation. Using these solutions allows us to calculate the complete first-order corrections in the short-wavelength limit to eigenmodes and eigenfrequencies in a Fabry-Perot resonator with perfectly conducting mirrors. Experimentally relevant effects are predicted. Modes which are degenerate according to the paraxial approximation are split according to their total angular momentum. This includes a splitting due to co…
We propose to take advantage of the properties of long Josephson junctions to realize a frequency variable Fabry-Perot Filter that operates in the range 100-500 GHz with a bandwidth below 1 GHz. In fact, we show that it is possible to exploit the tunability of the effective impedance of the Josephson component, that is controlled by a dc bias, to tune, up to $10\%$ of the central frequency, the resonance of the system. An analysis of the linearized system indicates the range of operation and the main characteristic parameters Numerical simulations of the full nonlinear Josephson element confir…
Coupled high-finesse optical Fabry-Perot microcavities
本研究通过直接光子隧穿实现两个高精细度光纤法布里-珀罗微腔的耦合，验证了不同横模耦合强度与耗散速率的可变性，还观测到动力学推广的电磁诱导透明产生的窄光谱特征，揭示无亚稳态耗散系统也可存在长寿命相干态。
A key issue in developing pendular Fabry-Perot interferometers as very accurate displacement measurement devices, is the noise level. The Fabry-Perot pendulums are the most promising device to detect gravitational waves, and therefore the background and the internal noise should be accurately measured and reduced. In fact terminal masses generates additional internal noise mainly due to thermal fluctuations and vibrations. We propose to exploit the reflectivity change, that occurs in some special points, to monitor the pendulums free oscillations and possibly estimate the noise level. We find …
A temporal boundary refers to a specific time at which the properties of an optical medium are abruptly changed. When light interacts with the temporal boundary, its spectral content can be redistributed due to the breaking of continuous time-translational symmetry of the medium where light resides. In this work, we use this principle to demonstrate, at terahertz (THz) frequencies, the resonance-enhanced spectral funneling of light coupled to a Fabry-Perot resonator with a temporal boundary mirror. To produce a temporal boundary effect, we abruptly increase the reflectance of a mirror constitu…
Symmetry-Broken Cavity Solitons and Collective Polarization Conformity in Fabry-Perot Kerr Resonators
该研究在法布里-珀罗Kerr共振腔中实验生成了极化对称破缺的腔体孤子，并揭示了多个孤子在特定阈值下收敛到相同不对称极化态的集体极化一致性现象。
The factors limiting the resolution of displacement sensor based on extrinsic Fabry-Perot interferometer were studied. An analytical model giving the dependency of EFPI resolution on the parameters of an optical setup and a sensor interrogator was developed. The proposed model enables one to either estimate the limit of possible resolution achievable with a given setup, or to derive the requirements for optical elements and/or a sensor interrogator necessary for attaining the desired sensor resolution. An experiment supporting the analytical derivations was performed, demonstrating a large dyn…
Factors that contribute to the temperature dependence of a resonant frequency in a low-expansion optical cavity are discussed, including deformation at the cavity ends due to different coefficients of thermal expansion (CTE) of the spacer, optically-contacted mirror substrate and coating. A model of the temperature dependence is presented that incorporates finite-element-analysis of the cavity ends. A measurement of frequency versus temperature of a cavity mode is used along with the model to deduce a spacers CTE versus temperature profile. The measured profile correlates very well with a sepa…
Optical nanofiber cavity research has mainly focused on the fundamental mode. Here, a Fabry-Pérot fiber cavity with an optical nanofiber supporting the higher-order modes, TE01, TM01, HE21o, and HE21e, is demonstrated. Using cavity spectroscopy, with mode imaging and analysis, we observe cavity resonances that exhibit complex, inhomogeneous states of polarization with topological features containing Stokes singularities such as C-points, Poincaré vortices, and L-lines. In situ tuning of the intracavity birefringence enables the desired profile and polarization of the cavity mode to be obtained…
In this letter, we demonstrate for the first time that by combining the effects of the Wood-Rayleigh Anomaly (WRA) and the Fabry-Perot (FP) resonance, transmission efficiencies of $1$D metallo-dielectric gratings on substrates can be significantly improved compared to when these two phenomena work separately. Results of combining the WRA and the FP resonance can be utilized to eliminate the necessity of using the index matching technique and the core-shell structure for enhancing the performance of extraordinary optical transmission devices. Further, the outcomes of combining the WRA and the F…
A Novel Approach to Interface High-Q Fabry-Pérot Resonators with Photonic Circuits
本文提出一种利用数值优化的多端口偏振分束光栅耦合器的反射消除电路，实现了高Q值Fabry-Pérot谐振腔与硅光子电路的高效接口，达到55%耦合效率、5.8 dB插入损耗及超9 dB背向反射抑制，并支持片上PDH频率锁定。
Investigation of intrinsic properties of high-quality fiber Fabry--Perot resonators
本研究优化了几厘米长的光纤法布里-珀罗谐振腔，通过调节反射镜反射率和波导尺寸，实现了超过10^9的负载品质因数及大于10^10的内在品质因数，并展示了其在激光频率稳定化中的应用。
Lasers stabilized to vacuum-gap Fabry-Pérot optical reference cavities display extraordinarily low noise and high stability, with linewidths much less than 1 Hz. These lasers can expand into new applications and ubiquitous use with the development of compact, portable cavities that are manufacturable at scale. Here we demonstrate an 8 mL volume Fabry-Pérot cavity constructed with mirrors that are fabricated lithographically with finesse near 1 million. A laser locked to the cavity exhibits phase noise limited by the cavity thermal noise for offset frequencies ranging from 1 Hz to $\approx$ 1 k…
A thermoelastic limit on the focal intensity in Fabry-Pérot cavities
研究法布里-珀罗腔中光致热弹性变形对模式聚焦强度的限制，通过实验验证模型预测的极限值为2.9 TW/cm²。
We measured the far-field emission patterns in three dimensions of flat organic dye microlasers using a solid angle scanner. Polymer-based microcavities of ribbon shape (i.e., Fabry-Perot type) were investigated. Out of plane emission from the cavities was observed, with significant differences for the two cases of resonators either fully supported by the substrate or sustained by a pedestal. In both cases, the emission diagrams are accounted for by a model combining diffraction at the cavity edges and reflections from the substrate.
Free-running Fabry-Perot lasers normally operate in a single-mode regime until the pumping current is increased beyond the single-mode instability threshold, above which they evolve into a multimode state. As a result of this instability, the single-mode operation of these lasers is typically constrained to few percents of their output power range, this being an undesired limitation in spectroscopy applications. In order to expand the span of single-mode operation, we use an optical injection seed generated by an external-cavity single-mode laser source to force the Fabry-Perot quantum cascade…
We present a method to engineer the frequency splitting of polarization eigenmodes in fiber Fabry-Perot (FFP) cavities. Using specific pattern of multiple CO$_2$ laser pulses, we machine paraboloidal micromirrors with controlled elliptical shape in a large range of radius of curvature. This method is versatile and can be used to produce cavities with maximized or near-zero polarization mode splitting. In addition, we realize dual-wavelength FFP cavities with finesse exceeding $40\,000$ at 780$\,$nm and at 1559$\,$nm in the telecom range. We provide direct evidence that the birefringent frequen…
Optimization of a fiber Fabry-Perot resonator for low-threshold modulation instability Kerr frequency combs
本文通过广义Lugiato-Lefever方程的线性稳定性分析推导了调制不稳定性功率阈值，结合功率增强因子与最佳耦合概念，预测并实验验证了光纤法布里-珀罗腔生成低阈值克尔频率梳的理想制造参数。
Anomalous spectral shift of transmission peaks is observed in a Fabry--Pérot cavity filled with a chiral anisotropic medium. The effective refractive index value resides out of the interval between the ordinary and the extraordinary refractive indices. The spectral shift is explained by contribution of a geometric phase. The problem is solved analytically using the approximate Jones matrix method, numerically using the accurate Berreman method and geometrically using the generalized Mauguin--Poincaré rolling cone method. The $o$-mode blue shift is measured for a 4-methoxybenzylidene-4'-$n$-but…
We report on measurements and modeling of the mode structure of tunable Fabry-Pérot optical microcavities with imperfect mirrors. We find that non-spherical mirror shape and finite mirror size lead to loss, mode deformation, and shifted resonance frequencies at particular mirror separations. For small mirror diameters, the useful cavity length is limited to values significantly below the expected stability range. We explain the observations by resonant coupling between different transverse modes of the cavity and mode-dependent diffraction loss. A model based on resonant state expansion that t…
Fabry-Pérot (FP) cavities are fundamental and ubiquitous optical elements frequently used in various sensing applications. Here, we introduce a general theoretical framework to study arbitrary light-cavity mode interactions for planar FPs and show how optical aberrations, intrinsic to the interrogating beam or due to imperfect cavities, reduce optical sensitivity by exciting higher-order spatial modes in the cavity. We find that particular Zernike aberrations play a dominant role in sensitivity degradation, and that the general loss of sensitivity can be significantly recovered by appropriate …
We perform a theoretical study of finesse limitations of a Fabry-Perot (FP) cavity occurring due to finite size, asymmetry, as well as imperfections of the cavity mirrors. A method of numerical simulations of the eigenvalue problem applicable for both the fundamental and high order cavity modes is suggested. Using this technique we find spatial profile of the modes and their round-trip diffraction loss. The results of the numerical simulations and analytical calculations are nearly identical when we consider a conventional FP cavity. The proposed numerical technique has much broader applicabil…
High finesse Fabry-Perot(FP) cavity is a very important frequency reference for laser stabiliza- tion, and is widely used for applications such as precision measurement, laser cooling of ions or molecules. But the non-linear response of the piezoelectric ceramic transducer (PZT) in the FP cav- ity limits the performance of the laser stabilization. Measuring and controlling such non-linearity are important. Here we report an in-situ, optical method to characterize this non-linearity by measuring the resonance signals of a dual-frequency laser. The differential measurement makes it insensitive t…
Soliton Pulses in Photonic Crystal Fabry-Perot Microresonators
首次在连续波驱动的高Q光子晶体法布里-珀罗微腔中实现了耗散克尔孤子，利用可定制的光子晶体反射镜开辟了新的色散工程空间并拓展了应用波长范围。
Tunable nonlinear optical bistability based on Dirac semimetal in photonic crystal Fabry-Perot cavity
本文研究了嵌入三维狄拉克半金属的一维光子晶体法布里-珀罗腔中的非线性光学双稳态，通过调节费米能级和优化结构参数实现了低阈值且可调谐的全光开关特性。
Sub-kelvin measurement of silicon thermal expansion with a Fabry-Pérot cavity stabilized laser
本文利用单晶硅法布里-珀罗腔超稳激光器在655 mK至16 K温区测量硅的热膨胀系数，首次实现亚开尔文CTE测量，并结合德拜与爱因斯坦模型进行理论近似。
We address the response, both in amplitude and intensity, of a Fabry-Perot from a variety of viewpoints. These complementary pictures conspire to achieve a comprehensive and consistent theory of the operation of this system.
A spherical Fabry-Perot interferometer with adjustable mirror spacing is used to produce interference fringes with frequency separation (c/2L)/N, N=2-15. The conditions for observation of these fringes are derived from the consideration of the eigenmodes of the cavity with high transverse indices.
One way of optically monitoring molecule concentrations is to utilise the high sensitivity of the transmission and reflection rates of Fabry-Perot cavities to changes of their optical properties. Up to now, intrinsic and extrinsic Fabry-Perot cavity sensors have been considered with analytes either being placed inside the resonator or coupled to evanescent fields on the outside. Here we show that Fabry-Perot cavities can also be used to monitor molecule concentrations non-invasively and remotely, since the reflection of light from the target molecules back into the Fabry-Perot cavity adds upwa…
We present a general and useful method to predict the existence, frequency, and spatial properties of gap states in photonic (and other) structures with a gapped spectrum. This method is established using the scattering approach. It offers a viewpoint based on a geometrical Fabry-Perot model. We demonstrate the capabilities of this model by predicting the behaviour of topological edge states in quasi-periodic structures. A proposition to use this model in Casimir physics is presented.
In this paper we describe a Fabry-Perot interferometer in the language of quantum optics. We go on to model the Fabry-Perot interferometer as a beam splitter having frequency dependent transmissivity and reflectivity coefficients. The antibunching, a totally non-classical effect, is to be expected if one excites this interferometer with carefully frequency-selected single photons arriving simultaneously from opposite directions. Contrary to a normal beam splitter, even slightly different frequency single photons should be able to show this effect, as long as the photon counters are not frequen…
This document records the results of a comparison of the interferometer simulation Finesse against an analytic (MATLAB based) calculation of the alignment sensing signals of a Fabry Perot cavity. This task was started during the commissioning workshop at the LIGO Livingston site between the 28.1. and 1.02 2013 with the aim of creating a reference example for validating numerical simulation tools. The FFT based simulation OSCAR joined the battle later.
Optical Fabry-Perot cavities always show a non-degeneracy of two orthogonal polarisation states. This is due to the unavoidable birefringence of dielectric mirrors whose effects are extremely important in Fabry-Perot based high-accuracy polarimeters. We have developed and present here a theory of the polarisation state dynamics in a birefringent Fabry-Perot resonator, and we validate it through measurements performed with the polarimeter of the PVLAS experiment. The measurements are performed while a laser is frequency-locked to the cavity, and provide values for the finesse of the cavity and …
We propose a novel photonic structure composed of metal nanolayer, Bragg mirror and metal nanolayer. The structure supports resonances that are transitional between Fabry-Perot and Tamm modes. When the dielectric contrast of the DBR is removed these modes are a pair of conventional Fabry-Perot resonances. They spectrally merge into a Tamm mode at high contrast. Such behavior differs from the results for structures supporting Tamm modes reported earlier. The optical properties of the structure in the frequency range of the DBR stop band, including highly beneficial 50% transmittivity through th…
We present a method for remote interrogation of passive fiber Bragg grating Fabry-Perot resonators, employing current modulation of the diode laser source. With the presence of both RF amplitude and frequency modulation, it is a variant of the ultra-sensitive Pound-Drever-Hall laser frequency locking technique. We demonstrate that current modulation and interferometric demodulation removes the need for a phase modulator in the sensing architecture.
Dark solitons in Fabry-Perot resonators with Kerr media and normal dispersion
研究含 Kerr 介质和正常色散的 Fabry-Perot 谐振腔中暗腔孤子的存在与稳定性，揭示非局域耦合导致的宽失谐范围、尺寸依赖及多孤子长程同步。
We present the first demonstration of real-time closed-loop control and deterministic tuning of an independently suspended Fabry-Perot optical cavity using digitally-enhanced heterodyne interferometry, realising a peak sensitivity of $\sim$10 pm$/\sqrt{\mathrm{Hz}}$ over the 10-1000 Hz frequency band. The methods presented are readily extensible to multiple coupled cavities. As such, we anticipate that refinements of this technique may find application in future interferometric gravitational-wave detectors.
The dynamical response of an optical Fabry-Perot cavity is investigated experimentally. We observe oscillations in the transmitted and reflected light intensity if the frequency of the incoupled light field is rapidly changed. In addition, the decay of a cavity-stored light field is accelerated if the phase and intensity of the incoupled light are switched in an appropriate way. The theoretical model by M. J. Lawrence em et al, JOSA B 16, 523 (1999) agrees with our observations.
Fabry-Perot interferometers have stimulated numerous scientific and technical applications ranging from high resolution spectroscopy over metrology, optical filters to interfaces of light and matter at the quantum limit and more. End facet machining of optical fibers has enabled the miniaturization of optical Fabry-Perot cavities. Integration with fiber wave guide technology allows for small yet open devices with favorable scaling properties including mechanical stability and compact mode geometry. These Fiber Fabry-Perot Cavities (FFPCs) are stimulating extended applications in many fields in…
The scattering of weak dispersive waves (DW) on several equally spaced temporal solitons is studied. It is shown by systematic numerical simulations that the reflection of the DWs from the soliton trains strongly depends on the distance between the solitons. The dependence of the reflection and transmission coefficients on the inter-soliton distance and the frequency of the incident waves is studied in detail, revealing fascinating quasi-periodic behavior. The analogy between the observed nonlinear phenomena in temporal domain and usual Fabry-Perot and Bragg resonators is discussed.
We study a dispersion-compensated high-finesse optical Fabry-Perot microcavity under high-intensity cw pumping. The Kerr non-linearity in the optical coatings causes a spontaneous four-wave mixing process, which leads to the emission of time-correlated photon pairs. The photon frequencies are shifted by $\pm 1$ free spectral range relative to the pump frequency. This setup allows for constructing a photon-pair source with precisely adjustable frequency difference between the emitted photons, which may have applications in quantum communication.
扫码添加微信好友，提出您的宝贵建议 👇
💡 备注请填写：网站反馈
发表机构由 AI 从论文文本抽取，如发现错误，欢迎反馈修正建议。