Generalized Tanner graphs have been implicitly studied by a number of authors under the rubric of generalized parity-check matrices. This work considers the conditioning of binary hidden variables in such models in order to break all cycles and thus derive optimal soft-in soft-out (SISO) decoding algorithms. Conditionally cycle-free generalized Tanner graphs are shown to imply optimal SISO decoding algorithms for the first order Reed-Muller codes and their duals - the extended Hamming codes - which are substantially less complex than conventional bit-level trellis decoding. The study of low-complexity optimal SISO decoding algorithms for the family of extended Hamming codes is practically motivated. Specifically, it is shown that exended Hamming codes offer an attractive alternative to high-rate convolutional codes in terms of both performance and complexity for use in very high-rate, very low-floor, serially concatenated coding schemes.
Recently a powerful class of rate-compatible serially concatenated convolutional codes (SCCCs) have been proposed based on minimizing analytical upper bounds on the error probability in the error floor region. Here this class of codes is further investigated by combining analytical upper bounds with extrinsic information transfer charts analysis. Following this approach, we construct a family of rate-compatible SCCCs with good performance in both the error floor and the waterfall regions over a broad range of code rates.
We address the error floor problem of low-density parity check (LDPC) codes on the binary-input additive white Gaussian noise (AWGN) channel, by constructing a serially concatenated code consisting of two systematic irregular repeat accumulate (IRA) component codes connected by an interleaver. The interleaver is designed to prevent stopping-set error events in one of the IRA codes from propagating into stopping set events of the other code. Simulations with two 128-bit rate 0.707 IRA component codes show that the proposed architecture achieves a much lower error floor at higher SNRs, compared …
Spatially coupled serially concatenated codes (SC-SCCs) are a class of spatially coupled turbo-like codes, which have a close-to-capacity performance and low error floor. In this paper we investigate the impact of coupling memory, block length, decoding window size, and number of iterations on the performance, complexity, and latency of SC-SCCs. Several design tradeoffs are presented to see the relation between these parameters in a wide range. Also, our analysis provides design guidelines for SC-SCCs in different scenarios to make the code design independent of block length. As a result, bloc…
In this paper, we investigate the impact of spatial coupling on the thresholds of turbo-like codes. Parallel concatenated and serially concatenated convolutional codes as well as braided convolutional codes (BCCs) are compared by means of an exact density evolution (DE) analysis for the binary erasure channel (BEC). We propose two extensions of the original BCC ensemble to improve its threshold and demonstrate that their BP thresholds approach the maximum-a-posteriori (MAP) threshold of the uncoupled ensemble. A comparison of the different ensembles shows that parallel concatenated ensembles c…
We introduce a unified ensemble for turbo-like codes (TCs) that contains the four main classes of TCs: parallel concatenated codes, serially concatenated codes, hybrid concatenated codes, and braided convolutional codes. We show that for each of the original classes of TCs, it is possible to find an equivalent ensemble by proper selection of the design parameters in the unified ensemble. We also derive the density evolution (DE) equations for this ensemble over the binary erasure channel. The thresholds obtained from the DE indicate that the TC ensembles from the unified ensemble have similar …
In this paper, we give an overview of spatially coupled turbo codes (SC-TCs), the spatial coupling of parallel and serially concatenated convolutional codes, recently introduced by the authors. For presentation purposes, we focus on spatially coupled serially concatenated codes (SC-SCCs). We review the main principles of SC-TCs and discuss their exact density evolution (DE) analysis on the binary erasure channel. We also consider the construction of a family of rate-compatible SC-SCCs with simple 4-state component encoders. For all considered code rates, threshold saturation of the belief prop…
In this paper, we introduce the concept of spatially coupled turbo codes (SC-TCs), as the turbo codes counterpart of spatially coupled low-density parity-check codes. We describe spatial coupling for both Berrou et al. and Benedetto et al. parallel and serially concatenated codes. For the binary erasure channel, we derive the exact density evolution (DE) equations of SC-TCs by using the method proposed by Kurkoski et al. to compute the decoding erasure probability of convolutional encoders. Using DE, we then analyze the asymptotic behavior of SC-TCs. We observe that the belief propagation (BP)…
We define multilevel codes on bipartite graphs that have properties analogous to multilevel serial concatenations. A decoding algorithm is described that corrects a proportion of errors equal to half the Blokh-Zyablov bound on the minimum distance. The error probability of this algorithm has exponent similar to that of serially concatenated multilevel codes.
In this paper, we propose a serially concatenated turbo-encoded faster-than-Nyquist signaling (FTNS) transceiver that takes into account FTNS-specific colored noise effects. The proposed low-complexity receiver carries out soft-decision frequency-domain equalization with the aid of the minimum-mean square error criterion while whitening the colored noise. Simulation results demonstrate that the proposed multi-stage-concatenated FTNS system achieves a better error-ratio performance than previous systems that do not consider colored noise effects in the high-symbol-packing FTNS regime. Furthermo…
In this work, we give good concatenated code ensembles for the binary erasure channel (BEC). In particular, we consider repeat multiple-accumulate (RMA) code ensembles formed by the serial concatenation of a repetition code with multiple accumulators, and the hybrid concatenated code (HCC) ensembles recently introduced by Koller et al. (5th Int. Symp. on Turbo Codes & Rel. Topics, Lausanne, Switzerland) consisting of an outer multiple parallel concatenated code serially concatenated with an inner accumulator. We introduce stopping sets for iterative constituent code oriented decoding using max…
This paper considers iterative detection and decoding on the concatenated communication channel consisting of a two-dimensional magnetic recording (TDMR) channel modeled by the four-grain rectangular discrete grain model (DGM) proposed by Kavcic et. al., followed by a two-dimensional intersymbol interference (2D-ISI) channel modeled by linear convolution of the DGM model's output with a finite-extent 2D blurring mask followed by addition of white Gaussian noise. An iterative detection and decoding scheme combines TDMR detection, 2D-ISI detection, and soft-in/soft-out (SISO) channel decoding in…
Turbo codes and CRC codes are usually decoded separately according to the serially concatenated inner codes and outer codes respectively. In this letter, we propose a hybrid decoding algorithm of turbo-CRC codes, where the outer codes, CRC codes, are not used for error detection but as an assistance to improve the error correction performance. Two independent iterative decoding and reliability based decoding are carried out in a hybrid schedule, which can efficiently decode the two different codes as an entire codeword. By introducing an efficient error detecting method based on normalized Euc…
This work proposes a tractable estimation of the maximum a posteriori (MAP) threshold of various families of sparse-graph code ensembles, by using an approximation for the extended belief propagation generalized extrinsic information transfer (EBP-GEXIT) function, first proposed by Measson et al. We consider the transmission over non-binary complex-input additive white Gaussian noise channel and extend the existing results to obtain an expression for the GEXIT function. We estimate the MAP threshold by applying the Maxwell construction to the obtained approximate EBP-GEXIT charts for various f…
This paper considers detection and error control coding for the two-dimensional magnetic recording (TDMR) channel modeled by the two-dimensional (2D) four-rectangular-grain model proposed by Kavcic, Huang et. al. in 2010. This simple model captures the effects of different 2D grain sizes and shapes, as well as the TDMR grain overwrite effect: grains large enough to be written by successive bits retain the polarity of only the last bit written. We construct a row-by-row BCJR detection algorithm that considers outputs from two rows at a time over two adjacent columns, thereby enabling considerat…
In this paper, we propose a new ensemble of rateless forward error correction (FEC) codes. The proposed codes are serially concatenated codes with Reed-Solomon (RS) codes as outer codes and Kite codes as inner codes. The inner Kite codes are a special class of prefix rateless low-density parity-check (PRLDPC) codes, which can generate potentially infinite (or as many as required) random-like parity-check bits. The employment of RS codes as outer codes not only lowers down error-floors but also ensures (with high probability) the correctness of successfully decoded codewords. In addition to the…
