arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2604.01490cs.RO
收藏

远端稳定梁用于连续机器人

Distal-Stable Beam for Continuum Robots

Kyushu University(九州大学);The University of Electro-Communications(电气通信大学)

Ryouichi Saito, Takahiro Koide, Yuya Tanaka, Yasutaka Nakashima, Motoji Yamamoto, Ayato Kanada

AI总结:

本文提出一种新型结构元件远端稳定梁,通过几何设计实现强刚度梯度,保持中间部分的柔性和远端的高刚性,实验表明其远端刚度比中心高12倍,相比传统悬臂梁提升约100倍,为需要安全与精度的连续机器人提供新设计方法。

摘要:

连续机器人适合受限环境,但存在远端刚度低的问题,导致外部负载下姿态误差大。本文提出一种新型结构元件,远端稳定梁,通过纯几何设计实现强刚度梯度,保持中间部分的柔性和远端的高刚性。结构由两根平行杆和一根收敛杆组成,通过导向盘约束引入几何耦合,抑制变形模式并保持远端姿态。实验显示,远端刚度比中心高12倍,相当于传统悬臂梁的约100倍提升。所提机制在无需主动刚度调节的情况下实现同时的柔性和远端稳定性,为需要安全与精度的连续机器人提供新的设计方法。

英文摘要:

Continuum robots are well suited for constrained environments but suffer from low distal stiffness, resulting in large posture errors under external loads. In this paper, we propose a novel structural primitive, the Distal-Stable Beam, which achieves a strong stiffness gradient through purely geometric design, maintaining compliance in the intermediate section while ensuring high distal rigidity. The structure consists of two parallel rods and one convergent rod constrained by guide disks, introducing geometric coupling that suppresses deformation modes and preserves distal posture. Experiments show that the distal stiffness is 12 times higher than at the center, corresponding to an approximately 100-fold improvement over a conventional cantilever beam. The proposed mechanism enables simultaneous compliance and distal stability without active stiffness modulation, providing a new design approach for continuum robots requiring both safety and precision.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑