基于双立体视觉的毫米级软体连续机器人三维形态重建
Three-dimensional Morphological Reconstruction of Millimeter-Scale Soft Continuum Robots based on Dual-Stereo-Vision
AI总结:
针对现有连续机器人建模难以复现形态的问题,提出基于双立体视觉的毫米级带缺口管状连续机器人三维形态重建方法,通过双目点云采集与KD树重定位实现低质量点云下的形态还原,为软体机器人自建模研究铺路。
摘要:
连续机器人可被微型化至直径仅数毫米。其中,带缺口管状连续机器人(notched tubular continuum robots, NTCR)在众多精密应用中展现出巨大潜力。现有机器人建模研究聚焦于运动学与动力学,但在复现机器人形态方面仍面临挑战——形态是能够拓展连续机器人研究版图的重要因素,尤其对于具有非对称连续结构的机器人而言。本文提出一种基于双立体视觉的方法,用于毫米级NTCR的三维形态重建。该方法采用两台相对布置的固定双目相机采集NTCR的点云,随后以预定义几何结构为参考,通过KD树方法对采集到的点云进行重定位,即便原始点云采集质量较低,也能得到形态正确的NTCR。实验已证明该方法对直径3.5毫米的NTCR具有可行性,可识别16个缺口特征中的14个,测量值普遍集中在1.5毫米的标准值附近,展现出揭示形态细节的能力。本文提出的方法为毫米级软体机器人的三维形态重建奠定了基础,可用于后续的自建模研究。
英文摘要:
Continuum robots can be miniaturized to just a few millimeters in diameter. Among these, notched tubular continuum robots (NTCR) show great potential in many delicate applications. Existing works in robotic modeling focus on kinematics and dynamics but still face challenges in reproducing the robot's morphology -- a significant factor that can expand the research landscape of continuum robots, especially for those with asymmetric continuum structures. This paper proposes a dual stereo vision-based method for the three-dimensional morphological reconstruction of millimeter-scale NTCRs. The method employs two oppositely located stationary binocular cameras to capture the point cloud of the NTCR, then utilizes predefined geometry as a reference for the KD tree method to relocate the capture point clouds, resulting in a morphologically correct NTCR despite the low-quality raw point cloud collection. The method has been proved feasible for an NTCR with a 3.5 mm diameter, capturing 14 out of 16 notch features, with the measurements generally centered around the standard of 1.5 mm, demonstrating the capability of revealing morphological details. Our proposed method paves the way for 3D morphological reconstruction of millimeter-scale soft robots for further self-modeling study.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。