The rapid growth of hyperscale data centers driven by Large Language Models and Artificial Intelligence workloads has introduced new challenges for power systems. These facilities experience abrupt power variations during model training and check-point-saving events, causing voltage deviations and frequency disturbances. Moreover, they operate as passive loads that draw power without offering any grid support. This paper presents an integrated architecture that combines Battery Energy Storage Systems (BESSs) within data centers using Grid-Forming inverters to provide active grid-support functions. Simulation results through MATLAB/Simulink demonstrate accurate power reference tracking under dynamic loading, with eight coordinated BESS units supplying instantaneous power during training and saving conditions. Under single-phase voltage depression near the data center bus, the BESS delivered reactive power support similar to a Static Synchronous Compensator. During grid disconnection, seamless islanded operation was achieved with stable voltage, frequency, and continuous power delivery at the data center bus.
Large-scale Load-Altering Attacks (LAAs) against Internet-of-Things (IoT) enabled high-wattage electrical appliances (e.g., wifi-enabled air-conditioners, electric vehicles, etc.) pose a serious threat to power systems' security and stability. In this work, a Cyber-Resilient Economic Dispatch (CRED) framework is presented to mitigate the destabilizing effect of LAAs while minimizing the overall operational cost by dynamically optimizing the frequency droop control gains of Inverter-Based Resources (IBRs). The system frequency dynamics incorporating both LAAs and the IBR droop control are model…
Modern power systems are facing the tremendous challenge of integrating vast amounts of variable (non-dispatchable) renewable generation capacity, such as solar photovoltaic or wind power. In this context, the required power system flexibility needs to be allocated in other units that can include energy storage, demand management or providing reserve from renewables curtailing the output power. The present paper proposes the new concept of grid-forming load, which can be considered a totally flexible concept of demand. The concept is not only ensuring the load is supporting the grid stability …
In February 2021, an unprecedented winter storm swept across the U.S., severely affecting the Texas power grid, leading to more than 4.5 million customers' electricity service interruption. This paper assesses the load shedding experienced by customers under realistic scenarios in the actual power grid. It also conducts a preliminary study on using energy storage and load rationing to mitigate rotating blackout's adverse impact on the grid. It is estimated that utility-scale battery storage systems with a total installed capacity of 920 GWh would be required to fully offset the load shedding d…
This paper presents a novel grid-forming voltage control strategy for a battery energy storage system to maintain balanced three-phase output voltages when serving unbalanced loads. A stationary reference frame ($αβ$) based control scheme is proposed to regulate positive-sequence and negative-sequence voltages. Compared with the conventional rotating reference frame ($dq$) based control scheme, the proposed scheme shows better dynamic performance. Then, we analyze the system zero-sequence network and propose adding a grounding transformer to the Y/Yg connected output transformer to further red…
Design and implementation of an optimal and robust single-loop voltage controller is proposed for single-phase grid forming voltage source inverter (VSI). The objective of the proposed controller is to have good reference tracking and disturbance rejection. Uncertain nature of loads can significantly alter system's behavior, especially during heavily loaded conditions, and impose an uncertainty in the dynamic model. This deteriorates the robustness of the controller severely. H-Infinity-based controller design is proposed in this article to address this issue. The required objectives of the op…
A high share of distributed photovoltaic (PV) generation in low-voltage networks may lead to over-voltage, and line/transformer overloading. To mitigate these issues, we investigate how advanced electricity tariffs could ensure safe grid operation hile enabling building owners to recover their investment in a PV and storage system. We show that dynamic volumetric electricity prices trigger economic opportunities for large investments in PV and battery capacity but lead to more pressure on the grid while capacity and block rate tariffs mitigate over-voltage and decrease line loading issues. How…
It is speculated that higher penetration of inverter-based distributed photo-voltaic (PV) power generators can increase the risk of tripping events due to voltage fluctuations. To quantify this risk utilities need to solve the interactive equations of tripping events for networked PVs in real-time. However, these equations are non-differentiable, nonlinear, and exponentially complex, and thus, cannot be used as a tractable basis for solar curtailment prediction and mitigation. Furthermore, load/PV power values might not be available in real-time due to limited grid observability, which further…
Wildfires pose a growing risk to public safety in regions like the western United States, and, historically, electric power systems have ignited some of the most destructive wildfires. To reduce wildfire ignition risks, power system operators preemptively de-energize high-risk power lines during extreme wildfire conditions as part of "Public Safety Power Shutoff" (PSPS) events. While capable of substantially reducing acute wildfire risks, PSPS events can also result in significant amounts of load shedding as the partially de-energized system may not be able to supply all customer demands. In t…
This paper presents a load switching group based energy management system (LSG-EMS) for operating microgrids on a distribution feeder powered by one or multiple grid-forming distributed energy resources. Loads on a distribution feeder are divided into load switching groups that can be remotely switched on and off. The LSG-EMS algorithm, formulated as a mixed-integer linear programming (MILP) problem, has an objective function of maximizing the served loads while minimizing the total number of switching actions. A new set of topology constraints are developed for allowing multiple microgrids to…
Grid-following and grid-forming inverters are integral components of microgrids and for integration of renewable energy sources with the grid. For grid following inverters, which need to emulate controllable current sources, a significant challenge is to address the large uncertainty of the grid impedance. For grid forming inverters, which need to emulate a controllable voltage source, large uncertainty due to varying loads has to be addressed. In this article, a mu-synthesis-based robust control design methodology, where performance under quantified uncertainty is guaranteed, is developed und…
Non-intrusive load monitoring (NILM), aims to infer the power profiles of appliances from the aggregated power signal via purely analytical methods. Existing NILM methods are susceptible to various issues such as the noise and transient spikes of the power signal, overshoots at the mode transition times, close consumption values by different appliances, and unavailability of a large training dataset. This paper proposes a novel event-based NILM classification algorithm mitigating these issues. The proposed algorithm (i) filters power consumption signals and accurately detects all events, (ii) …
Inverter-interfaced microgrids results in challenges when designing protection systems. Traditional time-overcurrent, admittance, and differential protection methods are unsuitable on account of lack of fault current, excessively short lines, or a prohibitive number of protective devices needing to be installed. Current practice is to force all inverters to shut down during fault conditions, weakening resilience and reducing reliability. Dynamic state estimation (DSE), which has been explored for both line protection and load bus protection before, is a potential solution to these challenges t…
Geomagnetic disturbances (GMDs), a result of space weather, pose a severe risk to electric grids. When GMDs occur, they can cause geomagnetically-induced currents (GICs), which saturate transformers, induce hot-spot heating, and increase reactive power losses in the transmission grid. Furthermore, uncertainty in the magnitude and orientation of the geo-electric field, and insufficient historical data make the problem of mitigating the effects of uncertain GMDs challenging. In this paper, we propose a novel distributionally robust optimization (DRO) approach that models uncertain GMDs and mitig…
Tsinghua University（清华大学）；The Chinese University of Hong Kong, Shenzhen（香港中文大学（深圳））
Smart meter devices enable a better understanding of the demand at the potential risk of private information leakage. One promising solution to mitigating such risk is to inject noises into the meter data to achieve a certain level of differential privacy. In this paper, we cast one-shot non-intrusive load monitoring (NILM) in the compressive sensing framework, and bridge the gap between theoretical accuracy of NILM inference and differential privacy's parameters. We then derive the valid theoretical bounds to offer insights on how the differential privacy parameters affect the NILM performanc…
As combating climate change has become a top priority and as many countries are taking steps to make their power generation sustainable, there is a marked increase in the use of renewable energy sources (RESs) for electricity generation. Among these RESs, solar photovoltaics (PV) is one of the most popular sources of energy connected to LV distribution networks. With the greater integration of solar PV into LV distribution networks, utility providers impose caps to solar penetration in order to operate their network safely and within acceptable norms. One parameter that restricts solar PV pene…
The renewable energy is connected to the power grid through power electronic converters, which are lack of make the inertia of synchronous generator/machine (SM) be lost. The increasing penetration of renewable energy in power system weakens the frequency and voltage stability. The Grid-Forming Converters (GFCs) simulate the function of synchronous motor through control method in order to improve the stability of power grid by providing inertia and stability regulation mechanism. This kind of converter control methods include virtual synchronous machine, schedulable virtual oscillator control …
This paper presents the novel Droop-e grid-forming inverter control strategy, which establishes an active power-frequency relationship based on an exponential function of the inverter power dispatch. The advantages of this control strategy include an increased utilization of available headroom, mitigated system frequency dynamics, and a natural limiting behavior, all of which are directly compared to the hitherto standard static droop approach. First, the small signal stability of the Droop-e control is assessed on a 3-bus system and found stable across all possible inverter power dispatches. …
In a purely inverter-based microgrid, both grid-forming (GFM) and grid-following (GFL) inverters will have a crucial role to play in frequency/voltage regulation and maintaining power sharing through their grid support capabilities. Consequently, the coordination between these two technologies becomes increasingly important for optimal system performance. However, the existing work does not consider GFL's potential to participate in a secondary control in coordination with GFM, thus not able to utilize the full capability of inverter resources. In this paper, we show that it is possible to ful…
Microgrids are increasingly recognized as a key technology for the integration of distributed energy resources into the power network, allowing local clusters of load and distributed energy resources to operate autonomously. However, microgrid operation brings new challenges, especially in islanded operation as frequency and voltage control are no longer provided by large rotating machines. Instead, the power converters in the microgrid must coordinate to regulate the frequency and voltage and ensure stability. We consider the problem of designing controllers to achieve these objectives. Using…
