Revealing the dynamic responses of Pb under shock loading based on DFT-accuracy machine learning potential
Institute of Applied Physics and Computational Mathematics(应用物理与计算数学研究所);Graduate School of China Academy of Engineering Physics(中国工程物理研究院研究生院);National Key Laboratory of Computational Physics, Institute of Applied Physics(计算物理国家重点实验室,应用物理研究所);HEDPS, CAPT, College of Engineering(HEDPS、CAPT、工程学院);School of Physics, Peking University(北京大学物理学院)
Lead (Pb) is a typical low-melting-point ductile metal and serves as an important model material in the study of dynamic responses. Under shock-wave loading, its dynamic mechanical behavior comprises two key phenomena: plastic deformation and shock induced phase transitions. The underlying mechanisms of these processes are still poorly understood. Revealing these mechanisms remains challenging for experimental approaches. Non-equilibrium molecular dynamics (NEMD) simulations are an alternative theoretical tool for studying dynamic responses, as they capture atomic-scale mechanisms such as defect evolution and deformation pathways. However, due to the limited accuracy of empirical interatomic potentials, the reliability of previous NEMD studies is questioned. Using our newly developed machine learning potential for Pb-Sn alloys, we revisited the microstructure evolution in response to shock loading under various shock orientations. The results reveal that shock loading along the [001] orientation of Pb exhibits a fast, reversible, and massive phase transition and stacking fault evolution. The behavior of Pb differs from previous studies by the absence of twinning during plastic deformation. Loading along the [011] orientation leads to slow, irreversible plastic deformation, and a localized FCC-BCC phase transition in the Pitsch orientation relationship. This study provides crucial theoretical insights into the dynamic mechanical response of Pb, offering a theoretical input for understanding the microstructure-performance relationship under extreme conditions.
Fifth-degree elastic potential for predictive stress-strain relations and elastic instabilities under large strain and complex loading in Si
在复杂载荷下的材料产生大的应变,并且通常通过弹性不稳定性转变,如在简单和复杂系统中所观察到的。在这里,我们提出了硅我在大应变的拉格朗日应变方面的$5^{th}$阶弹性势通过最小化误差相对于密度泛函理论(DFT)的结果。任意复杂载荷下的Cauchy应力-Lagrangian应变曲线与密度泛函理论(DFT)结果吻合良好,包括驱动Si I $\rightarrow$ II相变(PT)的弹性不稳定性和剪切不稳定性。PT条件下的Si I $\rightarrow$ II的作用下的立方轴向应力是线性的柯西应力与DFT预测。这样的弹性势允许研究弹性不稳定性和取向依赖性,导致不同的PT,滑移,孪生,或断裂,提供了一个基本的基础,连续模拟极端负载下的晶体行为。
Revealing the tribological stress field by using deformation twins as probes
Institute for Applied Materials (IAM), Karlsruhe Institute of Technology (KIT)(卡尔斯鲁厄理工学院应用材料研究所);IAM-ZM MicroTribology Center (µTC)(IAM-ZM微摩擦学中心);Continuum Mechanics, Institute of Engineering Mechanics (ITM), Karlsruhe Institute of Technology (KIT)(卡尔斯鲁厄理工学院工程力学系连续力学研究组)
Co atoms on Bi$_{2}$Se$_{3}$ revealing a coverage dependent spin reorientation transition
我们通过扫描隧道显微镜和光谱[STM/STS]、X射线吸收光谱[XAS]、X射线磁二色性[XMCD]和密度泛函理论[DFT]计算研究了Bi $_{2}$ Se $_{3}$上的Co纳米结构。在单吸附原子制度,我们发现两个不同的吸附位点的STM。我们的计算表明,这些是fcc和hcp的衬底空心网站。STS示出了一个明显的峰,只有一个物种的钴吸附原子表明不同的电子性质的两种类型。这些都解释了我们的DFT计算的基础上,通过不同的杂交基板。使用XMCD,我们发现一个覆盖依赖于自旋重取向过渡从易平面到出平面。我们认为集群是这种观察的主要原因。
Revealing the Electronic Structure of van der Waals Antiferromagnetic NiPS$_3$ through Synchrotron-Based $μ$-ARPES and Alkali Metal Dosing
Boston University(波士顿大学);Lawrence Berkeley National Laboratory(劳伦斯伯克利国家实验室);Rice University(莱斯大学);Universidade Federal de Ouro Preto(欧罗普雷托联邦大学);Universidade Federal de Minas Gerais(米纳斯吉拉斯联邦大学);University of Bristol(布里斯托大学)
Revealing magnetism in the distorted kagome $R$Ti$_3$Bi$_4$ ($R$ = Nd, Sm, Gd) via ARPES and XMCD
Donostia International Physics Center (DIPC)(多诺斯蒂亚国际物理中心);University of the Basque Country (UPV/EHU)(巴斯克大学);Centro de Física de Materiales (CFM) CSIC-UPV/EHU(材料物理中心 (CFM) 西班牙国家研究委员会-巴斯克大学);ALBA Synchrotron Light Source(阿尔巴同步辐射光源);National Synchrotron Light Source II, Brookhaven National Laboratory(布鲁克海文国家实验室国家同步辐射光源二号设施);Diamond Light Source Ltd(钻石光源有限公司);Max Planck Institute for Chemical Physics of Solids(马克斯·普朗克固体化学物理研究所)
Revealing Short- and Long-range Li-ion diffusion in Li$_2$MnO$_3$ from finite-temperature dynamical mean field theory
University of Illinois at Chicago(芝加哥伊利诺伊大学);Argonne National Laboratory(阿贡国家实验室);Lawrence Berkeley National Laboratory(劳伦斯伯克利国家实验室);University of California Berkeley(加州大学伯克利分校)
Deformation, lattice instability, and metallization during solid-solid structural transformations under general applied stress tensor: example of Si I -> Si II
采用密度泛函理论(DFT)研究了半导体Si I(立方A4结构)和金属Si II(四方A5结构)在一般应力张量作用下的固-固相变(PT)过程中的应力-应变行为、弹性不稳定性和金属化.与正常的应力($σ_1$,$σ_2$,$σ_3$)作用沿$\left<110 \right>$,$\left<1\bar{1}0 \right>$,和$\left<001\right>$,分别指示模拟单元,我们确定了6个独立的应力,驱动硅I $\rightarrow$硅II PT的晶格不稳定性的组合,和一个超导金属电子过渡。金属化先于结构PT,因此,应力Si I可以是金属。令人惊讶的是,无应力的Si II在DFT中是亚稳态的。值得注意的是,静水压力的PT为75.81 GPa,而在单轴应力下为11.03 GPa(或3.68 GPa平均压力)。我们的主要成果:Si I -> Si II PT由修正相变功的临界值描述,如用相场方法发现的,并且PT准则对于一般施加应力只有两个参数。更一般地说,我们的研究结果是至关重要的揭示新的(和更经济的)材料合成路线的新的或已知的高压阶段下控制和可预测的非流体静力学加载和塑性形变。
Experiment-driven atomistic materials modeling: A case study combining X-ray photoelectron spectroscopy and machine learning potentials to infer the structure of oxygen-rich amorphous carbon