全聚合物复合泡沫复合材料的拉伸性能:实验表征和数学模拟
Tensile properties of all-polymeric syntactic foam composites: experimental characterization and mathematical modelling
摘要:
在大应变循环和单调拉伸载荷下研究了全聚合物复合泡沫塑料,以揭示其拉伸应力-应变行为、回复性、拉伸强度和断裂伸长率。这里研究的复合泡沫塑料由两个不同等级(551和920)的中空热塑性微球(HTM)组成,具有平均壁厚和直径的分布,以各种体积分数嵌入聚氨酯基质中。记录循环加载-卸载曲线,揭示材料所表现出的粘弹性水平(随着HTM体积分数的增加,其变得更强),并指示在大应变下加载的可重复性水平。样品还经受单调拉伸载荷以研究其断裂伸长率。较高体积分数的HTM增加了材料的刚度,并且虽然观察到材料在宽范围的拉伸应变下是高弹性的,但是对于更高度填充的材料,在较低水平的应变下出现损坏。因此,HTM复合泡沫塑料表现出较低的断裂应变相比,净矩阵,这是由于矩阵微球界面脱粘。此外,通过采用优化技术,线弹性性能的微球和平均壳厚度的551级推断通过比较实验结果的预测从广义自洽方法,将多分散性数据的微球的尺寸分布。这些结果补充了以前的工作,涉及直接实验测量的920级壳厚度。结果还表明,微球特性的表征并不严重依赖于获得高分辨率微球直径分布数据,只要一个准确的代表性平均直径是已知的。
英文摘要:
All-polymer syntactic foams are studied under large strain cyclic and monotonic tensile loading in order to reveal their tensile stress-strain behaviour, recoverability, tensile strength, and elongation at break. The syntactic foam under study here consists of hollow thermoplastic microspheres (HTMs) of two distinct grades (551 and 920), with distributions of mean-wall thicknesses and diameters, embedded inside a polyurethane matrix in various volume fractions. Cyclic loading-unloading curves are recorded, revealing the level of viscoelasticity exhibited by the materials (which becomes a stronger effect with increasing volume fractions of HTMs) and indicating the level of repeatability of loading under large strain. Samples are also subjected to monotonic tensile loading in order to study their elongation at break. Higher volume fractions of HTMs increase the stiffness of the material and whilst it is observed that the materials are highly elastic over a wide range of tensile strains, damage arises at lower levels of strain for more highly filled materials. The HTM syntactic foams thus exhibit lower breaking strains compared to the neat matrix, which is attributed to matrix-microsphere interfacial debonding. Furthermore, by employing optimization techniques, linear elastic properties of the microspheres and an average shell thickness of the 551 grade are inferred by comparing experimental results to predictions from the Generalized Self-Consistent Method, incorporating polydispersity data on the size distribution of the microspheres. These results complement previous work which involved direct experimental measurements of the 920 grade shell thickness. Results also indicate that the characterization of microsphere properties is not critically dependent on access to high resolution microsphere diameter distribution data, provided that an accurate representative mean diameter is known.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。