In an era characterized by the rapid growth of data processing, developing new and efficient data processing technologies has become a priority. We address this by proposing a novel type of neuromorphic technology we call Fused-MemBrain. Our proposal is inspired by Golgi's theory modeling the brain as a syncytial continuum, in contrast to Cajal's theory of neurons and synapses being discrete elements. While Cajal's theory has long been the dominant and experimentally validated view of the nervous system, recent discoveries showed that a species of marine invertebrate (ctenophore Mnemiopsis leidyi) may be better described by Golgi's theory. The core idea is to develop hardware that functions analogously to a syncytial network, exploiting self-assembled memristive systems and combining them with CMOS technologies, interfacing with the silicon back-end-of-line. In this way, a memristive self-assembled material can cheaply and efficiently replace the synaptic connections between CMOS neuron implementations in neuromorphic hardware, enhancing the capability of massively parallel computation. The fusion of CMOS circuits with a memristive ``plexus'' allows information transfer without requiring engineered synapses, which typically consume significant area. As the first step toward this ambitious goal, we present a simulation of a memristive network interfaced with spiking neural networks. Additionally, we describe the potential benefits of such a system, along with key technical aspects it should incorporate.
An instrumentation amplifier (InAmp) is an electronic device used in many applications, where test and measuring accuracy is required. However, one of the drawbacks of an InAmp is limited operation gain range. In this paper, we investigate the possibility of replacing CMOS transistors in InAmp with memristive devices. The application of memristors in CMOS instrumentation amplifier design has lead to reduction of on-chip area and power consumption, comparing to the original design. The memristor based implementation of InAmp design has an improved gain. The advantages of memristor application a…
This paper proposes four quadrant analog multiplier using CMOS-memristor circuit. Currently, there are plenty of analog multipliers using resistors and CMOS transistors. They can attain perfect multiplication but have several disadvantages such as lower processing speed, higher power consumption and larger chip areas. Memristor based circuits are introduced to resolve the mentioned drawbacks. In this paper current mode four quadrant multiplier based on squaring circuits is taken as a framework, and CMOS transistors are replaced with memristors. The circuit design is simulated with SPICE, and v…
Brain inspired circuits can provide an alternative solution to implement computing architectures taking advantage of fault tolerance and generalisation ability of logic gates. In this brief, we advance over the memristive threshold circuit configuration consisting of memristive averaging circuit in combination with operational amplifier and/or CMOS inverters in application to realizing complex computing circuits. The developed memristive threshold logic gates are used for designing FFT and multiplication circuits useful for modern microprocessors. Overall, the proposed threshold logic outperfo…
In the last decade, the interest to emulation of the functionality and structure of the human brain to solve the problems related to image processing and pattern recognition, especially using to Artificial Neural Network (ANN), has increased. Since the capability of ANN to compute at high-speed has been proven to be very useful for various computational problems. One of the simple ANN models is perceptron. Since the perceptron is the basic form of a neural network, the efficient implementation of analog activation functions is required. As various works introduce the design of sigmoid and tang…
In this paper, we propose an analog pixel differencing circuit for differentiating pixels between frames directly from CMOS pixels. The analog information processing at sensor is a topic of growing appeal to develop edge AI devices. The proposed circuit is integrated into a pixel-parallel and pixel-column architectures. The proposed system is design using TSMC $180nm$ CMOS technology. The power dissipation of the proposed circuit is $96.64mW$, and on-chip ares is $531.66 μm^2$. The architectures are tested for moving object detection application.
Bielefeld University（比勒费尔德大学）；University of Zurich（苏黎世大学）；ETH Zurich（苏黎世联邦理工学院）
The development of memristive device technologies has reached a level of maturity to enable the design of complex and large-scale hybrid memristive-CMOS neural processing systems. These systems offer promising solutions for implementing novel in-memory computing architectures for machine learning and data analysis problems. We argue that they are also ideal building blocks for the integration in neuromorphic electronic circuits suitable for ultra-low power brain-inspired sensory processing systems, therefore leading to the innovative solutions for always-on edge-computing and Internet-of-Thing…
Generative Adversarial Network (GAN) is a well known computationally complex algorithm requiring signficiant computational resources in software implementations including large amount of data to be trained. This makes its implementation in edge devices with conventional microprocessor hardware a slow and difficult task. In this paper, we propose to accelerate the computationally intensive GAN using memristive neural networks in analog domain. We present a fully analog hardware design of Deep Convolutional GAN (DCGAN) based on CMOS-memristive convolutional and deconvolutional networks simulated…
In this paper, we propose an efficient predefined structured sparsity-based ex-situ training framework for a hybrid CMOS-memristive neuromorphic hardware for deep neural network to significantly lower the power consumption and computational complexity and improve scalability. The structure is verified on a wide range of datasets including MNIST handwritten recognition, breast cancer prediction, and mobile health monitoring. The results of this study show that compared to its fully connected version, the proposed structure provides significant power reduction while maintaining high classificati…
Recent advancements in the development of memristive devices has opened new opportunities for hardware implementation of non-Boolean computing. To this end, the suitability of memristive devices for swarm intelligence algorithms has enabled researchers to solve a maze in hardware. In this paper, we utilize swarm intelligence of memristive networks to perform image edge detection. First, we propose a hardware-friendly algorithm for image edge detection based on ant colony. Second, we implement the image edge detection algorithm using memristive networks. Furthermore, we explain the impact of va…
Hierarchical Temporal Memory (HTM) is a neuromorphic algorithm that emulates sparsity, hierarchy and modularity resembling the working principles of neocortex. Feature encoding is an important step to create sparse binary patterns. This sparsity is introduced by the binary weights and random weight assignment in the initialization stage of the HTM. We propose the alternative deterministic method for the HTM initialization stage, which connects the HTM weights to the input data and preserves natural sparsity of the input information. Further, we introduce the hardware implementation of the dete…
We experimentally demonstrate classification of 4x4 binary images into 4 classes, using a 3-layer mixed-signal neuromorphic network ("MLP perceptron"), based on two passive 20x20 memristive crossbar arrays, board-integrated with discrete CMOS components. The network features 10 hidden-layer and 4 output-layer analog CMOS neurons and 428 metal-oxide memristors, i.e. is almost an order of magnitude more complex than any previously reported functional memristor circuit. Moreover, the inference operation of this classifier is performed entirely in the integrated hardware. To deal with larger cross…
The progress of the Internet of Things(IoT) technologies and applications requires the efficient low power circuits and architectures to maintain and improve the performance of the increasingly growing data processing systems. Memristive circuits and substitution of energy-consuming devices with memristors is a promising solution to reduce on-chip area and power dissipation of the architectures. In this paper, we proposed a CMOS-memristive fully differential transimpedance amplifier and assess the impact of memristors on the amplifier performance. The fully differential amplifiers were simulat…
In a data-driven economy, virtually all industries benefit from advances in information technology -- powerful computing systems are critically important for rapid technological progress. However, this progress might be at risk of slowing down if we do not address the discrepancy between our current computing power demands and what the existing technologies can offer. Key limitations to improving energy efficiency are the excessive growth of data transfer costs associated with the von Neumann architecture and the fundamental limits of complementary metal-oxide-semiconductor (CMOS) technologies…
Neuromorphic computing using post-CMOS technologies is gaining immense popularity due to its promising abilities to address the memory and power bottlenecks in von-Neumann computing systems. In this paper, we propose RESPARC - a reconfigurable and energy efficient architecture built-on Memristive Crossbar Arrays (MCA) for deep Spiking Neural Networks (SNNs). Prior works were primarily focused on device and circuit implementations of SNNs on crossbars. RESPARC advances this by proposing a complete system for SNN acceleration and its subsequent analysis. RESPARC utilizes the energy-efficiency of…
Memristive devices represent a promising technology for building neuromorphic electronic systems. In addition to their compactness and non-volatility features, they are characterized by computationally relevant physical properties, such as state-dependence, non-linear conductance changes, and intrinsic variability in both their switching threshold and conductance values, that make them ideal devices for emulating the bio-physics of real synapses. In this paper we present a spiking neural network architecture that supports the use of memristive devices as synaptic elements, and propose mixed-si…
Despite all the progress of semiconductor integrated circuit technology, the extreme complexity of the human cerebral cortex makes the hardware implementation of neuromorphic networks with a comparable number of devices exceptionally challenging. One of the most prospective candidates to provide comparable complexity, while operating much faster and with manageable power dissipation, are so-called CrossNets based on hybrid CMOS/memristor circuits. In these circuits, the usual CMOS stack is augmented with one or several crossbar layers, with adjustable two-terminal memristors at each crosspoint…
Neuromorphic computing based on spiking neural networks has the potential to significantly improve on-line learning capabilities and energy efficiency of artificial intelligence, specially for edge computing. Recent progress in computational neuroscience have demonstrated the importance of heterosynaptic plasticity for network activity regulation and memorization. Implementing heterosynaptic plasticity in hardware is thus highly desirable, but important materials and engineering challenges remain, calling for breakthroughs in neuromorphic devices. In this mini-review, we propose an overview of…
Nazarbayev University（纳扎尔巴耶夫大学）；King Abdullah University of Science and Technology（阿卜杜拉国王科技大学）
The on-chip implementation of learning algorithms would speed-up the training of neural networks in crossbar arrays. The circuit level design and implementation of backpropagation algorithm using gradient descent operation for neural network architectures is an open problem. In this paper, we proposed the analog backpropagation learning circuits for various memristive learning architectures, such as Deep Neural Network (DNN), Binary Neural Network (BNN), Multiple Neural Network (MNN), Hierarchical Temporal Memory (HTM) and Long-Short Term Memory (LSTM). The circuit design and verification is d…
Nazarbayev University（纳扎尔巴耶夫大学）；University of California Berkeley（加州大学伯克利分校）
The volume, veracity, variability, and velocity of data produced from the ever-increasing network of sensors connected to Internet pose challenges for power management, scalability, and sustainability of cloud computing infrastructure. Increasing the data processing capability of edge computing devices at lower power requirements can reduce several overheads for cloud computing solutions. This paper provides the review of neuromorphic CMOS-memristive architectures that can be integrated into edge computing devices. We discuss why the neuromorphic architectures are useful for edge devices and s…
The progress in the field of neural computation hinges on the use of hardware more efficient than the conventional microprocessors. Recent works have shown that mixed-signal integrated memristive circuits, especially their passive ('0T1R') variety, may increase the neuromorphic network performance dramatically, leaving far behind their digital counterparts. The major obstacle, however, is relatively immature memristor technology so that only limited functionality has been demonstrated to date. Here we experimentally demonstrate operation of one-hidden layer perceptron classifier entirely in th…
Recent breakthroughs in neuromorphic computing show that local forms of gradient descent learning are compatible with Spiking Neural Networks (SNNs) and synaptic plasticity. Although SNNs can be scalably implemented using neuromorphic VLSI, an architecture that can learn using gradient-descent in situ is still missing. In this paper, we propose a local, gradient-based, error-triggered learning algorithm with online ternary weight updates. The proposed algorithm enables online training of multi-layer SNNs with memristive neuromorphic hardware showing a small loss in the performance compared wit…
This paper presents a survey of the currently available hardware designs for implementation of the human cortex inspired algorithm, Hierarchical Temporal Memory (HTM). In this review, we focus on the state of the art advances of memristive HTM implementation and related HTM applications. With the advent of edge computing, HTM can be a potential algorithm to implement on-chip near sensor data processing. The comparison of analog memristive circuit implementations with the digital and mixed-signal solutions are provided. The advantages of memristive HTM over digital implementations against perfo…
The areal footprint of memristors is a key consideration in material-based neuromorophic computing and large-scale architecture integration. Electronic transport in the most widely investigated memristive devices is mediated by filaments, posing a challenge to their scalability in architecture implementation. Here we present a compelling alternative memristive device and demonstrate that areal downscaling leads to enhancement in memristive memory window, while maintaining analogue behavior, contrary to expectations. Our device designs directly integrated on semiconducting Nb-SrTiO$_3$ allows l…
Mapping neuro-inspired algorithms to sensor backplanes of on-chip hardware require shifting the signal processing from digital to the analog domain, demanding memory technologies beyond conventional CMOS binary storage units. Using memristors for building analog data storage is one of the promising approaches amongst emerging non-volatile memory technologies. Recently, a memristive multi-level memory (MLM) cell for storing discrete analog values has been developed in which memory system is implemented combining memristors in voltage divider configuration. In given example, the memory cell of 3…
In this paper, the hardware implementation of a neuromorphic system is presented. This system is composed of a Leaky Integrate-and-Fire with Latency (LIFL) neuron and a Spike-Timing Dependent Plasticity (STDP) synapse. LIFL neuron model allows to encode more information than the common Integrate-and-Fire models, typically considered for neuromorphic implementations. In our system LIFL neuron is implemented using CMOS circuits while memristor is used for the implementation of the STDP synapse. A description of the entire circuit is provided. Finally, the capabilities of the proposed architectur…
Multi-Level Resistive Synapses for On-Chip Neural Networks: A Physics-Based Design of a Memristive Crossbar Fabric with Quasi-Continuous Conductance States
Sorting is needed in many application domains. The data is read from memory and sent to a general purpose processor or application specific hardware for sorting. The sorted data is then written back to the memory. Reading/writing data from/to memory and transferring data between memory and processing unit incur a large latency and energy overhead. In this work, we develop, to the best of our knowledge, the first architectures for in-memory sorting of data. We propose two architectures. The first architecture is applicable to the conventional format of representing data, weighted binary radix. …
A large effort is devoted to the research of new computing paradigms associated to innovative nanotechnologies that should complement and/or propose alternative solutions to the classical Von Neumann/CMOS association. Among various propositions, Spiking Neural Network (SNN) seems a valid candidate. (i) In terms of functions, SNN using relative spike timing for information coding are deemed to be the most effective at taking inspiration from the brain to allow fast and efficient processing of information for complex tasks in recognition or classification. (ii) In terms of technology, SNN may be…
Implementation of Neuromorphic Systems using post Complementary Metal-Oxide-Semiconductor (CMOS) technology based Memristive Crossbar Array (MCA) has emerged as a promising solution to enable low-power acceleration of neural networks. However, the recent trend to design Deep Neural Networks (DNNs) for achieving human-like cognitive abilities poses significant challenges towards the scalable design of neuromorphic systems (due to the increase in computation/storage demands). Network pruning [7] is a powerful technique to remove redundant connections for designing optimally connected (maximally …
Neuromorphic systems that learn and predict from streaming inputs hold significant promise in pervasive edge computing and its applications. In this paper, a neuromorphic system that processes spatio-temporal information on the edge is proposed. Algorithmically, the system is based on hierarchical temporal memory that inherently offers online learning, resiliency, and fault tolerance. Architecturally, it is a full custom mixed-signal design with an underlying digital communication scheme and analog computational modules. Therefore, the proposed system features reconfigurability, real-time proc…
Analysis of time-series data allows to identify long-term trends and make predictions that can help to improve our lives. With the rapid development of artificial neural networks, long short-term memory (LSTM) recurrent neural network (RNN) configuration is found to be capable in dealing with time-series forecasting problems where data points are time-dependent and possess seasonality trends. Gated structure of LSTM cell and flexibility in network topology (one-to-many, many-to-one, etc.) allows to model systems with multiple input variables and control several parameters such as the size of t…
Non-Boolean computing based on emerging post-CMOS technologies can potentially pave the way for low-power neural computing platforms. However, existing work on such emerging neuromorphic architectures have either focused on solely mimicking the neuron, or the synapse functionality. While memristive devices have been proposed to emulate biological synapses, spintronic devices have proved to be efficient at performing the thresholding operation of the neuron at ultra-low currents. In this work, we propose an All-Spin Artificial Neural Network where a single spintronic device acts as the basic bu…
Deep 'Analog Artificial Neural Networks' (ANNs) perform complex classification problems with remarkably high accuracy. However, they rely on humongous amount of power to perform the calculations, veiling the accuracy benefits. The biological brain on the other hand is significantly more powerful than such networks and consumes orders of magnitude less power, indicating us about some conceptual mismatch. Given that the biological neurons communicate using energy efficient trains of spikes, and the behavior is non-deterministic, incorporating these effects in Deep Artificial Neural Networks may …
A neuromorphic chip that combines CMOS analog spiking neurons and memristive synapses offers a promising solution to brain-inspired computing, as it can provide massive neural network parallelism and density. Previous hybrid analog CMOS-memristor approaches required extensive CMOS circuitry for training, and thus eliminated most of the density advantages gained by the adoption of memristor synapses. Further, they used different waveforms for pre and post-synaptic spikes that added undesirable circuit overhead. Here we describe a hardware architecture that can feature a large number of memristo…
Nazarbayev University（纳扎尔巴耶夫大学）；King Abdullah University of Science and Technology（阿卜杜拉国王科技大学）
Synaptic Sampling Machine (SSM) is a type of neural network model that considers biological unreliability of the synapses. We propose the circuit design of the SSM neural network which is realized through the memristive-CMOS crossbar structure with the synaptic sampling cell (SSC) being used as a basic stochastic unit. The increase in the edge computing devices in the Internet of things era, drives the need for hardware acceleration for data processing and computing. The computational considerations of the processing speed and possibility for the real-time realization pushes the synaptic sampl…
Neural processing on devices and circuits is fast becoming a popular approach to emulate biological neural networks. Elaborate CMOS and memristive technologies have been employed to achieve this, including chalcogenide-based in-memory computing concepts. Here we show that nano-scaled films of chalcogenide semiconductors can serve as building-blocks for novel types of neural computations where their tunable electronic and optical properties are jointly exploited. We demonstrate that ultrathin photoactive cavities of Ge-doped Selenide can emulate the computationally powerful non-linear operation…
Measurement of the Crystallization and Phase Transition of Niobium Dioxide Thin-Films for Neuromorphic Computing Applications Using a Tube Furnace Optical Transmission System
Machine learning imitates the basic features of biological neural networks to efficiently perform tasks such as pattern recognition. This has been mostly achieved at a software level, and a strong effort is currently being made to mimic neurons and synapses with hardware components, an approach known as neuromorphic computing. CMOS-based circuits have been used for this purpose, but they are non-scalable, limiting the device density and motivating the search for neuromorphic materials. While recent advances in resistive switching have provided a path to emulate synapses at the 10 nm scale, a s…
