arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2411.03084eess.SP
收藏

恒定包络MIMO下行链路中采用RZF预编码器的总速率最大化

Sum Rate Maximization in the Constant Envelope MIMO Downlink with the RZF Precoder

Ferhad Askerbeyli, Wen Xu, Josef A. Nossek

AI总结:

针对CE MIMO下行链路,提出两种基于近似SISO信道转换的RZF功率分配算法,以最大化总速率,其中一种最优但复杂度高,另一种近优且低复杂度,性能优于现有方法。

摘要:

在大规模多输入多输出(MIMO)系统中,向功率放大器(PA)馈送恒定包络(CE)信号是降低功耗的有效方法。由CE信号引起的非线性失真必须通过信号处理来缓解,以提高可实现的总速率。为此,许多线性和非线性预编码技术已被开发用于CE MIMO下行链路。这些CE预编码技术中的绝大多数不包含功率分配方案,而在用户间存在信道增益不平衡的下行链路中,功率分配对于实现足够的性能是不可或缺的。在本文中,我们提出了两种算法,用于在CE MIMO下行链路中为正则化迫零(RZF)预编码生成功率分配方案。这两种技术都基于将CE量化MIMO下行链路转换为近似等效的并行单输入单输出(SISO)信道系统。第一种技术被证明能够最优地解决近似系统中的总速率最大化问题,而第二种技术以较低的复杂度获得局部最大值。我们还将另一种最先进的、具有线性预编码的量化感知总速率最大化算法扩展到CE下行链路。数值结果表明,当在功率分配中考虑CE量化时,RZF预编码器的性能获得了显著提升。另一个关键的数值结果是,所提出的RZF技术实现了几乎相同的性能,因此选择计算复杂度较低的一种作为主要方法。结果还表明,所提出的RZF预编码方案的性能至少与最先进的方法相当,并且主要RZF方法的计算复杂度显著低于最先进的方法。

英文摘要:

Feeding power amplifiers (PAs) with constant envelope (CE) signals is an effective way to reduce the power consumption in massive multiple-input-multiple-output (MIMO) systems. The nonlinear distortion caused by CE signaling must be mitigated by means of signal processing to improve the achievable sum rates. To this purpose, many linear and nonlinear precoding techniques have been developed for the CE MIMO downlink. The vast majority of these CE precoding techniques do not include a power allocation scheme, which is indispensable to achieve adequate performances in the downlink with channel gain imbalances between users. In this paper, we present two algorithms to produce a power allocation scheme for regularized zero-forcing (RZF) precoding in CE MIMO downlink. Both techniques are based on transforming the CE quantized MIMO downlink to an approximately equivalent system of parallel single-input-single-output (SISO) channels. The first technique is proven to solve the sum rate maximization problem in the approximate system optimally, whereas the second technique obtains the local maximum with lower complexity. We also extend another state-of-the-art quantization aware sum rate maximization algorithm with linear precoding to the CE downlink. Numerical results illustrate significant gains for the performance of the RZF precoder when the CE quantization is taken into account in a power allocation. Another key numerical result is that the proposed RZF techniques achieve almost the identical performance so that the one with lower computational complexity is chosen as the main method. Results also show that the proposed RZF precoding schemes perform at least as good as the state-of-the-art method with an advantage that the main RZF method has significantly lower computational complexity than the state-of-the-art.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑