Radiation back-fluxes, generated from neutron-material interactions in fusion power reactors, can dramatically impact the plasma dynamics, e.g., by seeding runaway electrons during disruptions via Compton scattering of background electrons by wall-emitted gamma radiation. Here, we quantify these back-fluxes, including neutrons, gamma rays, and electrons, using Monte Carlo calculations for a range of structural material candidates and first wall thicknesses. The radiation back-flux magnitudes are remarkably large, with neutron and gamma radiation back-fluxes on the same order of magnitude as the incident fusion neutron flux. Electron back-fluxes are two orders of magnitudes lower, but are emitted at sufficiently high energies to provide a relatively large back-current through the sheath which may cause sheath reversal. Material configuration plays a key role in determining back-flux magnitudes. The structural material chiefly determines the neutron back-flux magnitude, while the first wall thickness principally attenuates the gamma ray and electron back-fluxes. In addition to prompt back-fluxes, which are emitted immediately after fusion neutrons impact the surface, significant delayed gamma ray and electron back-fluxes arise from nuclear decay processes in the activated materials. These delayed back-flux magnitudes range from 2%--7% of the prompt back-fluxes, and remain present during transients when fusion no longer occurs. During disruptions, build-up of delayed gamma radiation back-flux represents potential runaway electron seeding mechanisms, posing additional challenges for disruption mitigation in a power reactor compared with non-nuclear plasma operations. This work highlights the impact of these radiation back-fluxes plasma performance and demonstrates the importance of considering back-flux generation in materials selection for fusion power reactors.
Characterization of a prototype parallel-plate $^{238}$U fission chamber with DD and DT fusion neutron sources
Plasma Science and Fusion Center, Massachusetts Institute of Technology(麻省理工学院等离子体科学与聚变中心);Commonwealth Fusion Systems(联邦聚变系统);Coastal Carolina University(海岸卡罗来纳大学)
A Fully Electromagnetic Hybrid PIC-Fluid Model for Predictive Fusion Neutron Yield in Dense Plasma Focus
School of Energy Science and Engineering, Harbin Institute of Technology(哈尔滨工业大学能源科学与工程学院);School of Electrical Engineering and Automation, Hefei University of Technology(合肥工业大学电气与自动化工程学院);Institute of Applied Physics and Computational Mathematics(应用物理与计算数学研究所)
Beam filamentation instability drives deuterium-tritium fusion with polarized neutron emission
State Key Laboratory of Nuclear Physics and Technology, Peking University(北京大学核物理与技术国家重点实验室);Institute of Theoretical Physics, Chinese Academy of Sciences(中国科学院理论物理研究所);College of Physics, Sichuan University(四川大学物理学院);Beijing Laser Acceleration Innovation Center(北京激光聚变创新中心)
Effects of 3D printed capsule material on activation thin foil irradiation and counting for fusion neutron yield measurements
Plasma Science and Fusion Center, Massachusetts Institute of Technology(麻省理工学院等离子体科学与聚变中心);Commonwealth Fusion System(联邦聚变系统);Coastal Carolina University(沿海卡罗来纳大学)
A Numerical Solution of the Time-Dependent Neutron Transport Equation Using the Characteristic Method. Applications to ICF and to Hybrid Fission-Fusion Systems
Simulating fusion reactions from Coulomb explosions within a transport approach
本文用输运方法研究了强激光诱导氘团簇库仑爆炸的核聚变反应。采用随机方法,将D+D $\rightarrow$ n + He $^3$通道作为非弹性碰撞,用反应速率方程标定了箱系统模拟的中子产额。通过与现有理论极限的比较证明了单个团簇的库仑爆炸的合理性,然后我们研究了具有不同团簇数和团簇中不同氘数的系统的库仑爆炸动力学。我们发现,在最后阶段的氘核的动能谱是不同的,当中子大量产生,相应的显着不同的反应速率。我们还根据直观的参数化形式将中子产额结果从小系统外推到大系统,并与现有的实验结果进行了比较。本框架可以通过引入更多的通道来扩展,并有助于进一步研究更高能量下等离子体系统中的核聚变反应。
CuCrZr heat-sink irradiation performance reveals new challenges for thermonuclear fusion reactors
Université Lorraine(洛林大学);Montanuniversität Leoben(莱奥本矿业大学);UKAEA (United Kingdom Atomic Energy Authority)(英国原子能管理局);SCK CEN(比利时核研究中心);Universidade de São Paulo Escola Politécnica(圣保罗大学理工学院)