arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2409.10780cond-mat.mtrl-scicond-mat.supr-con
收藏

揭示Ta/蓝宝石超导薄膜中埋藏的金属-衬底界面层的起源与本质

Revealing the Origin and Nature of the Buried Metal-Substrate Interface Layer in Ta/Sapphire Superconducting Films

Aswin kumar Anbalagan, Rebecca Cummings, Chenyu Zhou, Junsik Mun, Vesna Stanic, Jean Jordan-Sweet, Juntao Yao, Kim Kisslinger, Conan Weiland, Dmytro Nykypanchuk… 展开作者

Aswin kumar Anbalagan, Rebecca Cummings, Chenyu Zhou, Junsik Mun, Vesna Stanic, Jean Jordan-Sweet, Juntao Yao, Kim Kisslinger, Conan Weiland, Dmytro Nykypanchuk, Steven L. Hulbert, Qiang Li, Yimei Zhu, Mingzhao Liu, Peter V. Sushko, Andrew L. Walter, Andi M. Barbour

AI总结:

该研究结合同步辐射X射线反射率、STEM、芯能级EELS与DFT,揭示Ta/蓝宝石超导薄膜中约0.65 nm的Al-O-Ta互混界面层及其由表面氧含量决定的形成机制。

摘要:

尽管表面和界面在量子比特的电磁模式中所占比例较小,但它们作为高损耗角正切来源可产生显著影响,因此需要揭示这些扩展缺陷的性质并确定控制它们的途径。在此,我们研究了存在于基于Ta/蓝宝石的超导薄膜中的金属-衬底界面层的结构和组成。对此类量子比特中常用的Ta薄膜进行基于同步辐射的X射线反射率测量,揭示了金属-衬底界面处一个此前未被探索的界面层。扫描透射电子显微术和芯能级电子能量损失谱识别出金属-衬底界面处一个约0.65 nm ± 0.05 nm厚的互混层,其中含有Al、O和Ta原子。密度泛函理论(DFT)建模表明,Ta/蓝宝石异质结的结构和性质由Ta沉积前蓝宝石表面的氧含量决定,文中以Ta薄膜在富氧与富Al的Al2O3 (0001)表面上的极限情形进行了讨论。通过采用整合多种材料表征技术和DFT建模的多模态方法,我们对金属与衬底之间的界面层获得了更深入的认识。这种金属-衬底界面处的互混会影响其热力学稳定性和电子行为,进而可能影响量子比特性能。

英文摘要:

Despite constituting a smaller fraction of the qubits electromagnetic mode, surfaces and interfaces can exert significant influence as sources of high-loss tangents, which brings forward the need to reveal properties of these extended defects and identify routes to their control. Here, we examine the structure and composition of the metal-substrate interfacial layer that exists in Ta/sapphire-based superconducting films. Synchrotron-based X-ray reflectivity measurements of Ta films, commonly used in these qubits, reveal an unexplored interface layer at the metal-substrate interface. Scanning transmission electron microscopy and core-level electron energy loss spectroscopy identified an approximately 0.65 \ \text{nm} \pm 0.05 \ \text{nm} thick intermixing layer at the metal-substrate interface containing Al, O, and Ta atoms. Density functional theory (DFT) modeling reveals that the structure and properties of the Ta/sapphire heterojunctions are determined by the oxygen content on the sapphire surface prior to Ta deposition, as discussed for the limiting cases of Ta films on the O-rich versus Al-rich Al2O3 (0001) surface. By using a multimodal approach, integrating various material characterization techniques and DFT modeling, we have gained deeper insights into the interface layer between the metal and substrate. This intermixing at the metal-substrate interface influences their thermodynamic stability and electronic behavior, which may affect qubit performance.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑