arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2407.06746math.OC
收藏

通过数据驱动多保真拓扑设计实现最大应力最小化

Maximum stress minimization via data-driven multifidelity topology design

Misato Kato, Taisei Kii, Kentaro Yaji, Kikuo Fujita

AI总结:

本文提出用数据驱动多保真拓扑设计(MFTD)直接求解原始最大应力最小化问题,无需松弛技术,并在L型支架基准上实现相同最大应力下体积最多减少22.6%。

摘要:

最大应力最小化问题是结构设计中最重要的课题之一。传统的基于梯度的拓扑优化方法需要通过松弛技术将原始问题转化为伪问题。由于这些参数对优化结果有显著影响,因此在不使用松弛技术的情况下精确求解最大应力最小化问题,有望实现极限性能。本文聚焦于这一挑战,研究在不使用松弛技术求解原始最大应力最小化问题时,与基于梯度的拓扑优化所得解相比,是否能够获得更多避免应力集中的设计。我们采用数据驱动多保真拓扑设计(MFTD),这是一种基于进化算法的无梯度拓扑优化方法。其基本框架包括:通过求解低保真优化问题生成候选解,通过高保真正向分析评估这些解,并在不进行灵敏度分析的情况下使用深度生成模型迭代更新这些解。在本研究中,数据驱动MFTD将求解带有p-范数应力测度的基于梯度的拓扑优化问题所获得的优化设计纳入初始解,并基于贴体网格的高保真分析求解原始最大应力最小化问题。我们通过L型支架基准测试验证了所提方法的有效性。使用数据驱动MFTD求解原始最大应力最小化问题的结果表明,在相同最大应力值下,与初始解相比,体积最多减少了22.6%。

英文摘要:

The maximum stress minimization problem is among the most important topics for structural design. The conventional gradient-based topology optimization methods require transforming the original problem into a pseudo-problem by relaxation techniques. Since their parameters significantly influence optimization, accurately solving the maximum stress minimization problem without using relaxation techniques is expected to achieve extreme performance. This paper focuses on this challenge and investigates whether designs with more avoided stress concentrations can be obtained by solving the original maximum stress minimization problem without relaxation techniques, compared to the solutions obtained by gradient-based topology optimization. We employ data-driven multifidelity topology design (MFTD), a gradient-free topology optimization based on evolutionary algorithms. The basic framework involves generating candidate solutions by solving a low-fidelity optimization problem, evaluating these solutions through high-fidelity forward analysis, and iteratively updating them using a deep generative model without sensitivity analysis. In this study, data-driven MFTD incorporates the optimized designs obtained by solving a gradient-based topology optimization problem with the p-norm stress measure in the initial solutions and solves the original maximum stress minimization problem based on a high-fidelity analysis with a body-fitted mesh. We demonstrate the effectiveness of our proposed approach through the benchmark of L-bracket. As a result of solving the original maximum stress minimization problem with data-driven MFTD, a volume reduction of up to 22.6% was achieved under the same maximum stress value, compared to the initial solution.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑