arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2412.19154math.OC
收藏

考虑应力集中问题的基于生成模型优化实体-多孔填充结构的演化去均匀化

Evolutionary de-homogenization using a generative model for optimizing solid-porous infill structures considering the stress concentration issue

Osaka University(大阪大学)

Shuzhi Xu, Hiroki Kawabe, Kentaro Yaji

AI总结:

针对多孔填充结构因几何近似导致应力集中分析不准的问题,提出基于去均匀化与多保真度优化的演化框架,结合深度生成模型与多目标进化算法迭代优化,实现了兼顾几何精度与结构性能的实体-多孔混合设计。

摘要:

由于复杂的几何配置,多孔填充结构的设计面临重大挑战,例如几何边界的准确表示和局部最大应力的控制。在当前主流设计方法(如拓扑优化)中,分析通常使用基于像素或体素的单元近似来执行。这些近似受优化框架的约束,导致分析模型与最终物理模型之间存在显著的几何差异。这种差异会严重影响结构性能,特别是对于准确几何形状对缓解应力集中至关重要的局部特性(如应力响应)。为了应对这些挑战,我们提出了演化去均匀化,这是一个基于去均匀化与数据驱动多保真度优化集成的设计框架。该框架通过弥合低保真度分析与高保真度物理实现之间的差距,促进了混合实体-多孔填充设计,确保了几何精度和增强的结构性能。低保真度级别利用常用的密度控制变量,而高保真度级别涉及基于具有精确几何表示的结构的应力分析。通过采用基于去均匀化的映射方法,建立了低保真度和高保真度结果之间的并排对应关系。通过将深度生成模型与多目标进化算法相结合,迭代调整低保真度控制变量以优化高保真度结果。最后,数值实验证明了所提方法的有效性。

英文摘要:

The design of porous infill structures presents significant challenges due to their complex geometric configurations, such as the accurate representation of geometric boundaries and the control of localized maximum stress. In current mainstream design methods, such as topology optimization, the analysis is often performed using pixel or voxel-based element approximations. These approximations, constrained by the optimization framework, result in substantial geometric discrepancies between the analysis model and the final physical model. Such discrepancies can severely impact structural performance, particularly for localized properties like stress response, where accurate geometry is critical to mitigating stress concentration. To address these challenges, we propose evolutionary de-homogenization, which is a design framework based on the integration of de-homogenization and data-driven multifidelity optimization. This framework facilitates the hybrid solid-porous infill design by bridging the gap between low-fidelity analysis and high-fidelity physical realizations, ensuring both geometric accuracy and enhanced structural performance. The low-fidelity level utilizes commonly used density control variables, while the high-fidelity level involves stress analysis based on structures with precise geometric representations. By employing a de-homogenization-based mapping method, a side-by-side correspondence between low-fidelity and high-fidelity results is established. The low-fidelity control variables are iteratively adjusted to optimize the high-fidelity results by integrating deep generative model with multi-objective evolutionary algorithm. Finally, numerical experiments demonstrate the effectiveness of the proposed method.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑