Materials typically fail under complex stress states, essentially involving dilatational (volumetric) components that eventually lead to material decohesion/separation. It is therefore important to understand dilatational irreversible deformation -- i.e., dilatational plasticity -- en route to failure. In the context of glasses, much focus has been given to shear (volume-preserving) plasticity, both in terms of the stress states considered and the corresponding material response. Here, using a recently-developed methodology and extensive computer simulations, we shed basic light on the elementary processes mediating dilatational plasticity in glasses. We show that plastic instabilities, corresponding to singularities of the glass Hessian, generically feature both dilatational and shear irreversible strain components. The relative magnitude and statistics of the strain components depend both on the symmetry of the driving stress (e.g., shear vs.~hydrostatic tension) and on the cohesive (attractive) part of the interatomic interaction. We further show that the tensorial shear component of the plastic strain is generally non-planar and also extract the characteristic volume of plastic instabilities. Elucidating the fundamental properties of the elementary micro-mechanical building blocks of plasticity in glasses sets the stage for addressing larger-scale, collective phenomena in dilatational plasticity such as topological changes in the form of cavitation and ductile-to-brittle transitions. As a first step in this direction, we show that the elastic moduli markedly soften during dilatational plastic deformation approaching cavitation.
Large dilatational hyperelasticity of glasses en route to cavitation failure
Weizmann Institute of Science（魏茨曼科学研究所）；University of Amsterdam（阿姆斯特丹大学）；CNRS, ESPCI Paris, Université PSL, Sorbonne Université, Université Paris Cité（法国国家科学研究中心、巴黎高等物理化工学院、巴黎文理研究大学、索邦大学、巴黎西岱大学）
Bonding between polymeric interfaces is encountered widely in several industrial applications. Many of these bonding processes rely on time-consuming and temperature-dependent classical mechanism of polymer interdiffusion via reptation in a melt state. Here, for the first time, we report a new mechanistic pathway for achieving solid-state polymer bonding by triggering rapid macromolecular acceleration through mechanical deformation. Large-scale molecular simulations reveal that active plastic deformation in glassy polymers, at temperatures well-below the bulk (and surface) glass transition tem…
A thermal activation model to describe the plasticity of bulk metallic glasses (Derlet and Maaß, Phil. Mag. 2013, DOI: 10.1080/14786435.2013.826396) which uses a distribution of barrier energies and some aspects of under-cooled liquid physics is developed further. In particular, a log-normal distribution is now employed to describe the statistics of barrier energies. A high temperature mean-field description of homogeneous macro-plasticity is then developed and is shown to be similar to a thermal activation picture employing a single characteristic activation energy and activation volume. In m…
In this paper we focus on the mechanical properties of oligomeric glasses (waxes), employing a microscopic model that provides, via numerical simulations, information about the shear modulus of such materials, the failure mechanism via plastic instabilities and about the geometric responses of the oligomers themselves to a mechanical load. We present a microscopic theory that explains the numerically observed phenomena, including an exact theory of the shear modulus and of the plastic instabilities, both local and system spanning. In addition we present a model to explain the geometric changes…
Amorphous solids, such as glasses, have complex responses to deformations, with significant consequences in material design and applications. In this respect two intertwined aspects are important: stability and reversibility. It is crucial to understand on the one hand how a glass may become unstable due to increased plasticity under shear deformations; on the other hand, to what extent the response is reversible, meaning how much a system is able to recover the original configuration once the perturbation is released. Here we focus on assemblies of hard spheres as the simplest model of amorph…
At temperatures well below their glass transition, the deformation properties of bulk metallic glasses are characterised by a sharp transition from elasticity to plasticity, a reproducible yield stress, and an approximately linear decrease of this stress with increasing temperature. In the present work it shown that when the well known properties of the under-cooled liquid regime, in terms of the underlying potential energy landscape, are assumed to be also valid at low temperature, a simple thermal activation model is able to reproduce the observed onset of macro-scopic yield. At these temper…
We show that quasi localized low-frequency modes in the vibrational spectrum can be used to construct soft spots, or regions vulnerable to rearrangement, which serve as a universal tool for the identification of flow defects in solids. We show that soft spots not only encode spatial information, via their location, but also directional information, via directors for particles within each soft spot. Single crystals with isolated dislocations exhibit low-frequency phonon modes that localize at the core, and their polarization pattern predicts the motion of atoms during elementary dislocation gli…
Simulations are used to examine the microscopic origins of strain hardening in polymer glasses. While stress-strain curves for a wide range of temperature can be fit to the functional form predicted by entropic network models, many other results are fundamentally inconsistent with the physical picture underlying these models. Stresses are too large to be entropic and have the wrong trend with temperature. The most dramatic hardening at large strains reflects increases in energy as chains are pulled taut between entanglements rather than a change in entropy. A weak entropic stress is only obser…
In a recent paper [S. Mandal et al., Phys. Rev. E 88, 022129 (2013)] the nature of spatial correlations of plasticity in hard sphere glasses was addressed both via computer simulations and in experiments. It was found that the experimentally obtained correlations obey a power law whereas the correlations from simulations are better fitted by an exponential decay. We here provide direct evidence--- via simulations of a hard sphere glass in 2D---that this discrepancy is a consequence of the finite system size in the 3D simulations. By extending the study to a 2D soft disk model at zero temperatu…
University of Milan（米兰大学）；University of Greifswald（格赖夫斯瓦尔德大学）；University of Amsterdam（阿姆斯特丹大学）；DEVCOM Army Research Laboratory（德文康姆陆军研究实验室）；Indian Institute of Science Education and Research Pune（印度科学教育与研究学院浦那分校）
A wide range of materials can exist in microscopically disordered solid forms, referred to as amorphous solids or glasses. Such materials -- oxide glasses and metallic glasses, to polymer glasses, and soft solids such as colloidal glasses, emulsions and granular packings -- are useful as structural materials in a variety of contexts. Their deformation and flow behaviour is relevant for many others. Apart from fundamental questions associated with the formation of these solids, comprehending their mechanical behaviour is thus of interest, and of significance for their use as materials. In parti…
By considering the low-frequency vibrational modes of amorphous solids, Manning and Liu [Phys. Rev. Lett. 107, 108302 (2011)] showed that a population of "soft spots" can be identified that are intimately related to plasticity at zero temperature under quasistatic shear. In this work we track individual soft spots with time in a two-dimensional sheared thermal Lennard Jones glass at temperatures ranging from deep in the glassy regime to above the glass transition temperature. We show that the lifetimes of individual soft spots are correlated with the timescale for structural relaxation. We add…
We present a mathematical description of amorphous solid deformation and plasticity by extending the concept of instantaneous normal modes (INMs) to deformed systems, which allows us to retain the effect of strain on the vibrational density of states (VDOS). Starting from the nonaffine lattice dynamics (NALD) description of elasticity and viscoelasticity of glasses, we formulate the linear response theory up to large deformations by considering the strain-dependent tangent modulus at finite values of shear strain. The (nonaffine) tangent shear modulus is computed from the vibrational density o…
We review the recent literature on the simulation of the structure and deformation of amorphous glasses, including oxide and metallic glasses. We consider simulations at different length and time scales. At the nanometer scale, we review studies based on atomistic simulations, with a particular emphasis on the role of the potential energy landscape and of the temperature. At the micrometer scale, we present the different mesoscopic models of amorphous plasticity and show the relation between shear banding and the type of disorder and correlations (e.g. elastic) included in the models. At the m…
While perfect crystals may exhibit a purely elastic response to shear all the way to yielding, the response of amorphous solids is punctuated by plastic events. The prevalence of this plasticity depends on the number of particles $N$ of the system, with the average strain interval before the first plastic event, $\overline{Δγ}$, scaling like $N^α$ with $α$ negative: larger samples are more susceptible to plasticity due to more numerous disorder-induced soft spots. In this paper we examine this scaling relation in ultra-stable glasses prepared with the Swap Monte Carlo algorithm, with regard to…
Frictional granular matter is shown to be fundamentally different in its plastic responses to external strains from generic glasses and amorphous solids without friction. While regular glasses exhibit plastic instabilities due to a vanishing of a real eigenvalue of the Hessian matrix, frictional granular materials can exhibit a previously unnoticed additional mechanism for instabilities, i.e. the appearance of a pair of complex eigenvalues leading to oscillatory exponential growth of perturbations which are tamed by dynamical nonlinearities. This fundamental difference appears crucial for the …
Avalanche behaviors, characterized by power-law statistics and structural relaxation that induces shear localization in amorphous plasticity, play an essential role in deciding the mechanical properties of amorphous metallic solids (i.e., metallic glasses). However, their interdependence is still not fully understood. To investigate the influence of structural relaxation on elementary avalanche behavior, we perform molecular-dynamics simulations for the shear deformation test of metallic glasses using two typical metallic-glass models comprising a less-relaxed (as-quenched) glass and a well-re…
We use an analogue of nanoindentation on a colloidal glass to elucidate the incipient plastic deformation of glasses. By tracking the motion of the individual particles in three dimensions, we visualize the strain field and glass structure during the emerging deformation. At the onset of flow, we observe a power-law distribution of strain indicating strongly correlated deformation, and reflecting a critical state of the glass. At later stages, the strain acquires a Gaussian distribution, indicating that plastic events become uncorrelated. Investigation of the glass structure using both static …
The effect of tensile stress applied during cooling of binary glasses on the potential energy states and mechanical properties is investigated using molecular dynamics simulations. We study the three-dimensional binary mixture that was first annealed near the glass transition temperature and then rapidly cooled under tension into the glass phase. It is found that at larger values of the applied stress, the liquid glass former freezes under higher strain and its potential energy is enhanced. For a fixed cooling rate, the maximum tensile stress that can be applied during cooling is reduced upon …
Amorphous solids lack long-range order. Therefore identifying structural defects -- akin to dislocations in crystalline solids -- that carry plastic flow in these systems remains a daunting challenge. By comparing many different structural indicators in computational models of glasses, under a variety of conditions we carefully assess which of these indicators are able to robustly identify the structural defects responsible for plastic flow in amorphous solids. We further demonstrate that the density of defects changes as a function of material preparation and strain in a manner that is highly…
The microscopic mechanism by which amorphous solids yield plastically under an externally applied stress or deformation has remained elusive in spite of enormous research activity in recent years. Most approaches have attempted to identify atomic-scale structural "defects" or spatio-temporal correlations in the undeformed glass that may trigger plastic instability. In contrast, here we show that the topological defects which correlate with plastic instability can be identified, not in the static structure of the glass, but rather in the nonaffine displacement field under deformation. These dis…
Polymer glasses have numerous advantageous mechanical properties in comparison to other materials. One of the most useful is the high degree of toughness that can be achieved due to significant yield occurring in the material. Remarkably, the onset of plasticity in polymeric materials is very poorly quantified, despite its importance as the ultimate limit of purely elastic behavior. Here we report the results of a novel experiment which is extremely sensitive to the onset of yield and discuss its impact on measurement and elastic theory. In particular, we use an elastic instability to locally …
Glassy solids may undergo a fluidization (yielding) transition upon deformation whereby the material starts to flow plastically. It has been a matter of debate whether this process is controlled by a specific time scale, from among different competing relaxation/kinetic processes. Here, two constitutive models of cage relaxation are examined within the microscopic model of nonaffine elasto-plasticity. One (widely used) constitutive model implies that the overall relaxation rate is dominated by the fastest between the structural ($α$) relaxation rate and the shear-induced relaxation rate. A dif…
Plastic deformation in amorphous solids is known to be carried by stress-induced localized rearrangements of a few tens of particles, accompanied by the conversion of elastic energy to heat. Despite their central role in determining how glasses yield and break, the search for a simple and generally applicable definition of the precursors of those plastic rearrangements -- the so-called shear transformation zones (STZs) -- is still ongoing. Here we present a simple definition of STZs -- based solely on the harmonic approximation of a glass' energy. We explain why and demonstrate directly that o…
Plastic instabilities in amorphous materials are often studied using idealized models of binary mixtures that do not capture accurately molecular interactions and bonding present in real glasses. Here we study atomic scale plastic instabilities in a three dimensional molecular dynamics model of silica glass under quasi-static shear. We identify two distinct types of elementary plastic events, one is a standard quasi-localized atomic rearrangement while the second is a bond breaking event that is absent in simplified models of fragile glass formers. Our results show that both plastic events can…
We combine the shear-transformation-zone (STZ) theory of amorphous plasticity with Edwards' statistical theory of granular materials to describe shear flow in a disordered system of thermalized hard spheres. The equations of motion for this system are developed within a statistical thermodynamic framework analogous to that which has been used in the analysis of molecular glasses. For hard spheres, the system volume $V$ replaces the internal energy $U$ as a function of entropy $S$ in conventional statistical mechanics. In place of the effective temperature, the compactivity $X = \partial V / \p…
We describe the shear flow of a disordered granular material in the presence of grain fracture using the shear-transformation-zone (STZ) theory of amorphous plasticity adapted to systems with a hard-core inter-particle interaction. To this end, we develop the equations of motion for this system within a statistical-thermodynamic framework analogous to that used in the analysis of molecular glasses. For hard-core systems, the amount of internal, configurational disorder is characterized by the compactivity $X = \partial V / \partial S_C$, where $V$ and $S_C$ are respectively the volume and conf…
We develop and extend a method presented in [S. Patinet, D. Vandembroucq, and M. L. Falk, Phys. Rev. Lett., 117, 045501 (2016)] to compute the local yield stresses at the atomic scale in model two-dimensional Lennard-Jones glasses produced via differing quench protocols. This technique allows us to sample the plastic rearrangements in a non-perturbative manner for different loading directions on a well-controlled length scale. Plastic activity upon shearing correlates strongly with the locations of low yield stresses in the quenched states. This correlation is higher in more structurally relax…
