We explore the potential of a simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) to enhance the performance of wireless surveillance systems. The STAR-RIS is deployed between a full-duplex (FD) multi-antenna legitimate eavesdropper (E) and a suspicious communication pair. It reflects the suspicious signal towards the suspicious receiver (SR), while simultaneously transmitting the same signal to E for interception purposes. Additionally, it enables the forwarding of a jamming signal from E to SR, which is located on the back side of the STAR-RIS. To enhance the eavesdropping non-outage probability, we formulate a non-convex joint optimization problem to design the beamforming vectors at E and reflection/transmission phase shift matrices at the STAR-RIS. We adopt the block coordinate descent (BCD) algorithm and propose an approach, mainly based on semi-definite relaxation (SDR) and successive convex approximation (SCA), for solving the resulting decoupled sub-problems. Finally, we compare the performance of the proposed design against low-complexity zero-forcing (ZF)-based beamforming designs.
Wireless surveillance is becoming increasingly important to protect the public security by legitimately eavesdropping suspicious wireless communications. This paper studies the wireless surveillance of a two-hop suspicious communication link by a half-duplex legitimate monitor. By exploring the suspicious link's two-hop nature, the monitor can adaptively choose among the following three eavesdropping modes to improve the eavesdropping performance: (I) \emph{passive eavesdropping} to intercept both hops to decode the message collectively, (II) \emph{proactive eavesdropping} via {\emph{noise jam…
Wireless information surveillance, by which suspicious wireless communications are closely monitored by legitimate agencies, is an integral part of national security. To enhance the information surveillance capability, we propose in this paper a new proactive eavesdropping approach via a spoofing relay, where the legitimate monitor operates in a full-duplex manner with simultaneous eavesdropping and spoofing relaying to vary the source transmission rate in favor of the eavesdropping performance. To this end, a power splitting receiver is proposed, where the signal received at each antenna of t…
Conventional wireless security assumes wireless communications are rightful and aims to protect them against malicious eavesdropping and jamming attacks. However, emerging infrastructure-free mobile communication networks are likely to be illegally used (e.g., by criminals or terrorists) but difficult to be monitored, thus imposing new challenges on the public security. To tackle this issue, this article presents a paradigm shift of wireless security to the surveillance and intervention of infrastructure-free suspicious and malicious wireless communications, by exploiting legitimate eavesdropp…
To improve national security, government agencies have long been committed to enforcing powerful surveillance measures on suspicious individuals or communications. In this paper, we consider a wireless legitimate surveillance system, where a full-duplex multi-antenna legitimate monitor aims to eavesdrop on a dubious communication link between a suspicious pair via proactive jamming. Assuming that the legitimate monitor can successfully overhear the suspicious information only when its achievable data rate is no smaller than that of the suspicious receiver, the key objective is to maximize the …
This paper jointly optimizes the flying location and wireless communication transmit power for an unmanned aerial vehicle (UAV) conducting covert operations. This is motivated by application scenarios such as military ground surveillance from airborne platforms, where it is vital for a UAV's signal transmission to be undetectable by those within the surveillance region. Specifically, we maximize the communication quality to a legitimate ground receiver outside the surveillance region, subject to: a covertness constraint, a maximum transmit power constraint, and a physical location constraint d…
RIS-Aided Cooperative ISAC Network for Imaging-Based Low-Altitude Surveillance
Southeast University（东南大学）；National Mobile Communications Research Laboratory, Southeast University（东南大学国家移动通信实验室）；Key Laboratory of Measurement and Control of Complex Systems of Engineering, Ministry of Education, Southeast University（东南大学教育部复杂工程测控重点实验室）；Frontiers Science Center for Mobile Information Communication and Security, Southeast University（东南大学移动信息通信与安全前沿科学中心）
Radio map in general refers to the geographical signal power spectrum density, formed by the superposition of concurrent wireless transmissions, as a function of location, frequency and time. It contains rich and useful information regarding the spectral activities and propagation channels in wireless networks. Such information can be leveraged to not only improve the performance of existing wireless services (e.g., via proactive resource provisioning) but also enable new applications, such as wireless spectrum surveillance. However, practical implementation of radio maps in wireless communica…
Surveillance performance is studied for a wireless eavesdropping system, where a full-duplex legitimate monitor eavesdrops a suspicious link efficiently with the artificial noise (AN) assistance. Different from the existing work in the literature, the suspicious receiver in this paper is assumed to be capable of detecting the presence of AN. Once such receiver detects the AN, the suspicious user will stop transmission, which is harmful for the surveillance performance. Hence, to improve the surveillance performance, AN should be transmitted covertly with a low detection probability by the susp…
Future wireless communication networks are expected to fulfill the unprecedented performance requirements to support our highly digitized and globally data-driven society. Various technological challenges must be overcome to achieve our goal. Among many potential technologies, reconfigurable intelligent surface (RIS) and artificial intelligence (AI) have attracted extensive attention, thereby leading to a proliferation of studies for utilizing them in wireless communication systems. The RIS-based wireless communication frameworks and AI-enabled technologies, two of the promising technologies f…
The reconfigurable intelligent surface (RIS) with low hardware cost and energy consumption has been recognized as a potential technique for future 6G communications to enhance coverage and capacity. To achieve this goal, accurate channel state information (CSI) in RIS assisted wireless communication system is essential for the joint beamforming at the base station (BS) and the RIS. However, channel estimation is challenging, since a large number of passive RIS elements cannot transmit, receive, or process signals. In the first part of this invited paper, we provide an overview of the fundament…
The design of 6th Generation (6G) wireless networks points towards flexible connect-and-compute technologies capable to support innovative services and use cases. Targeting the 2030 horizon, 6G networks are poised to pave the way for sustainable human-centered smart societies and vertical industries, such that wireless networks will be transformed into a distributed smart connectivity infrastructure, where new terminal types are embedded in the daily environment. In this context, the RISE-6G project aims at investigating innovative solutions that capitalize on the latest advances in the emergi…
Recent advances in the fabrication and experimentation of Reconfigurable Intelligent Surfaces (RISs) have motivated the concept of the smart radio environment, according to which the propagation of information-bearing waveforms in the wireless medium is amenable to programmability. Although the vast majority of recent experimental research on RIS-empowered wireless communications gravitates around narrowband beamforming in quasi-free space, RISs are foreseen to revolutionize wideband wireless connectivity in dense urban as well as indoor scenarios, which are usually characterized as strongly r…
Reconfigurable intelligent surface (RIS) is a revolutionary technology to enhance both the spectral efficiency and energy efficiency of wireless communication systems. However, most of the existing contributions mainly focused on the study of passive RIS, which suffers from the ``double fading'' effect. On the other hand, active RIS, which is equipped with amplifiers, can effectively address this issue. In this paper, we propose an active RIS-aided simultaneous wireless information and power transfer (SWIPT) system. Specifically, we maximize the weighted sum rate of the information receivers, …
The reconfigurable intelligent surface (RIS) is a promising technology that is anticipated to enable high spectrum and energy efficiencies in future wireless communication networks. This paper investigates optimum location-based RIS selection policies in RIS-aided wireless networks to maximize the end-to-end signal-to-noise ratio for product-scaling and sum-scaling path-loss models where the received power scales with the product and sum of the transmitter-to-RIS and RIS-to-receiver distances, respectively. These scaling laws cover the important cases of end-to-end path-loss models in RIS-aide…
This letter is concerned with the secrecy performance of reconfigurable intelligent surfaces (RIS)-aided wireless networks in the existence of multiple interferers towards the destination. To be more precise, we analyze three critical issues in the design of secure RIS-assisted networks: 1) How do interferers affect the performance of secure wireless networks? 2) Which of the two groups of eavesdroppers (i.e., colluding and non-colluding) is more severe? 3) How can RIS improve network confidentiality? To do so, we develop the analytical expression of secrecy outage probability in closed-form, …
Reconfigurable intelligent surface (RIS) is an emerging technology to enhance wireless communication in terms of energy cost and system performance by equipping a considerable quantity of nearly passive reflecting elements. This study focuses on a downlink RIS-assisted multiple-input multiple-output (MIMO) wireless communication system that comprises three communication links of Rician channel, including base station (BS) to RIS, RIS to user, and BS to user. The objective is to design an optimal transmit covariance matrix at BS and diagonal phase-shifting matrix at RIS to maximize the achievab…
In this paper, we study the statistical characterization and modeling of distributed multi-reconfigurable intelligent surface (RIS)-aided wireless systems. Specifically, we consider a practical system model where the RISs with different geometric sizes are distributively deployed, and wireless channels associated to different RISs are assumed to be independent but not identically distributed (i.n.i.d.). We propose two purpose-oriented multi-RIS-aided schemes, namely, the exhaustive RIS-aided (ERA) and opportunistic RIS-aided (ORA) schemes. A mathematical framework, which relies on the method o…
The objective of this paper is to develop simple techniques to enhance the performance of multi-user RIS aided wireless systems. Specifically, we develop a novel technique called \textit{channel separation} which provides a better understanding of how the RIS phases affect the uplink sum rate and sum rates for ZF and MMSE linear receivers. Leveraging channel separation, we propose a simple iterative algorithm to improve the uplink sum rate and the sum rates of ZF and MMSE linear receivers when discrete RIS phases are considered. For continuous RIS phases, we derive simple closed form solutions…
Channel reciprocity greatly facilitates downlink precoding in time-division duplexing (TDD) multiple-input multiple-output (MIMO) communications without the need for channel state information (CSI) feedback. Recently, reconfigurable intelligent surfaces (RISs) emerge as a promising technology to enhance the performance of future wireless networks. However, since the artificial electromagnetic characteristics of RISs do not strictly follow the normal laws of nature, it brings up a question: does the channel reciprocity hold in RIS-assisted TDD wireless networks? After briefly reviewing the reci…
Reconfigurable intelligent surface (RIS) can manipulate the wireless communication environment by controlling the coefficients of RIS elements. However, due to the large number of passive RIS elements without signal processing capability, channel estimation in RIS assisted wireless communication system requires high pilot overhead. In the second part of this invited paper, we propose to exploit the double-structured sparsity of the angular cascaded channels among users to reduce the pilot overhead. Specifically, we first reveal the double-structured sparsity, i.e., different angular cascaded c…
The demanding objectives for the future sixth generation (6G) of wireless communication networks have spurred recent research efforts on novel materials and radio-frequency front-end architectures for wireless connectivity, as well as revolutionary communication and computing paradigms. Among the pioneering candidate technologies for 6G belong the reconfigurable intelligent surfaces (RISs), which are artificial planar structures with integrated electronic circuits that can be programmed to manipulate the incoming electromagnetic field in a wide variety of functionalities. Incorporating RISs in…
Reconfigurable intelligent surface (RIS)-assisted communications is one of the promising candidates for next generation wireless networks by controlling the propagation environment dynamically. In this study, a channel modeling strategy for RIS-assisted wireless networks is introduced in sub-6 GHz bands by considering both far-field and near-field behaviours in transmission. We also proposed an open-source physical channel simulator for sub-6 GHz bands where operating frequency, propagation environment, terminal locations, RIS location and size can be adjusted. It is demonstrated via extensive…
One of the most critical aspects of enabling next-generation wireless technologies is developing an accurate and consistent channel model to be validated effectively with the help of real-world measurements. From this point of view, remarkable research has recently been conducted to model propagation channels involving the modification of the wireless propagation environment through the inclusion of reconfigurable intelligent surfaces (RISs). This study mainly aims to present a vision on channel modeling strategies for the RIS-empowered communications systems considering the state-of-the-art c…
Reconfigurable Intelligent Surfaces (RISs) constitute the enabler for programmable propagation of electromagnetic signals, and are lately being considered as a candidate physical-layer technology for the demanding connectivity, reliability, localization, and sustainability requirements of next generation wireless communications networks. In this paper, we present various deployment scenarios for RIS-enabled smart wireless environments that have been recently designed by the ongoing EU H2020 RISE-6G project. The scenarios are taxonomized according to performance objectives, in particular, conne…
The future 6G of wireless communication networks will have to meet multiple requirements in increasingly demanding levels, either individually or in combinations in small groups. This trend has spurred recent research activities on transceiver hardware architectures and novel wireless connectivity concepts. Among the emerging wireless hardware architectures belong the Reconfigurable Intelligent Surfaces (RISs), which are artificial planar structures with integrated electronic circuits that can be programmed to manipulate an incoming ElectroMagnetic (EM) field in a wide variety of functionaliti…
This work addresses the comparison between active and passive RISs in wireless networks, with reference to the system energy efficiency (EE). To provably convergent and computationally-friendly EE maximization algorithms are developed, which optimize the reflection coefficients of the RIS, the transmit powers, and the linear receive filters. Numerical results show the performance of the proposed methods and discuss the operating points in which active or passive RISs should be preferred from an energy-efficient perspective.
Reconfigurable Intelligent Surfaces (RISs) constitute the key enabler for programmable electromagnetic propagation environments, and are lately being considered as a candidate physical-layer technology for the demanding connectivity, reliability, localization, and sustainability requirements of next generation wireless networks. In this paper, we first present the deployment scenarios for RIS-enabled smart wireless environments that have been recently designed within the ongoing European Union Horizon 2020 RISE-6G project, as well as a network architecture integrating RISs with existing standa…
Reconfigurable Intelligent Surfaces (RISs) are recently attracting a wide interest due to their capability of tuning wireless propagation environments in order to increase the system performance of wireless networks. In this paper, a multiuser wireless network assisted by a RIS is studied and resource allocation algorithms are presented for several scenarios. First of all, the problem of channel estimation is considered, and an algorithm that permits separate estimation of the mobile user-to-RIS and RIS-to-base stations components is proposed. Then, for the special case of a single-user system…
We present a framework for operating a self-adaptive RIS inside a fading rich-scattering wireless environment. We model the rich-scattering wireless channel as being double-parametrized by (i) the RIS, and (ii) dynamic perturbers (moving objects, etc.). Within each coherence time, first, the self-adaptive RIS estimates the status of the dynamic perturbers (e.g., the perturbers' orientations and locations) based on measurements with an auxiliary wireless channel. Then, second, using a learned surrogate forward model of the mapping from RIS configuration and perturber status to wireless channel,…
Recently, reconfigurable intelligent surfaces (RIS) have attracted a lot of attention due to their capability of extending cell coverage by reflecting signals toward the receiver. In this letter, we analyze the coverage of a downlink RIS-assisted network with one base station (BS) and one user equipment (UE). Since the RIS orientation and the horizontal distance between the RIS and the BS have a significant influence on the cell coverage, we formulate an RIS placement optimization problem to maximize the cell coverage by optimizing the RIS orientation and horizontal distance. To solve the form…
This paper proposes highly accurate closed-form approximations to channel distributions of two different reconfigurable intelligent surface (RIS)-based wireless system setups, namely, dual-hop RIS-aided (RIS-DH) scheme and RIS-aided transmit (RIS-T) scheme. Differently from previous works, the proposed approximations reveal to be very tight for arbitrary number $N$ of reflecting metasurface's elements. Our findings are then applied to the performance analysis of the considered systems, in which the outage probability, bit error rate, and average channel capacity are derived. Results show that …
Reconfigurable Intelligent Surfaces (RIS) are a new paradigm which, with judicious deployment and alignment, can enable more favorable propagation environments and better wireless network design. As such, they can offer a number of potential benefits for next generation wireless systems including improved coverage, better interference management and even security. In this paper, we consider an uplink next generation wireless system where each user is assisted with an RIS. We study the uplink power control problem in this distributed RIS-assisted wireless network. Specifically, we aim to minimi…
A reconfigurable intelligent surface (RIS) is a planar structure that is engineered to dynamically control the electromagnetic waves. In wireless communications, RISs have recently emerged as a promising technology for realizing programmable and reconfigurable wireless propagation environments through nearly passive signal transformations. With the aid of RISs, a wireless environment becomes part of the network design parameters that are subject to optimization. In this tutorial paper, we focus our attention on communication models for RISs. First, we review the communication models that are m…
Reconfigurable intelligent surfaces (RISs) comprised of tunable unit cells have recently drawn significant attention due to their superior capability in manipulating electromagnetic waves. In particular, RIS-assisted wireless communications have the great potential to achieve significant performance improvement and coverage enhancement in a cost-effective and energy-efficient manner, by properly programming the reflection coefficients of the unit cells of RISs. In this paper, free-space path loss models for RIS-assisted wireless communications are developed for different scenarios by studying …
Reconfigurable intelligent surface (RIS)-empowered communication is being considered as an enabling technology for sixth generation (6G) wireless networks. The key idea of RIS-assisted communication is to enhance the capacity, coverage, energy efficiency, physical layer security, and many other aspects of modern wireless networks. At the same time, mobile edge computing (MEC) has already shown its huge potential by extending the computation, communication, and caching capabilities of a standalone cloud server to the network edge. In this article, we first provide an overview of how MEC and RIS…
Recently, reconfigurable intelligent surface (RIS) has gained research and development interests to modify wireless channel characteristics in order to improve performance of wireless communications, especially when quality of the line-of-sight channel is not that good. In this work, for the first time in the literature, we have used simultaneously transmitting and reflecting RIS (STAR-RIS) in non-orthogonal multiple-access visible light communication system to improve performance of the system. Achievable rates of the users are derived for two data recovery schemes, single-user detection (SUD…
Current scene depth estimation approaches mainly rely on optical sensing, which carries privacy concerns and suffers from estimation ambiguity for distant, shiny, and transparent surfaces/objects. Reconfigurable intelligent surfaces (RISs) provide a path for employing a massive number of antennas using low-cost and energy-efficient architectures. This has the potential for realizing RIS-aided wireless sensing with high spatial resolution. In this paper, we propose to employ RIS-aided wireless sensing systems for scene depth estimation. We develop a comprehensive framework for building accurate…
Secrecy outage probability (SOP) and secrecy rate (SR) of the reconfigurable intelligent surface (RIS) assisted wireless networks under Rician fading are investigated in this paper. More precisely, we enhance the secrecy performance of the considered networks by suppressing the wiretap channel instead of maximizing the main channel. We propose a simple heuristic algorithm to find out the optimal phase-shift of each RIS's element. Simulation results based on the Monte-Carlo method are given to verify the superiority of the proposed optimal phase-shifts compared to the random phase-shifts design…
Reconfigurable Intelligent Surfaces (RIS) or Intelligent Reflecting Surfaces (IRS) are metasurfaces that can be deployed in various places in wireless environments to make these environments controllable and reconfigurable. In this paper, we investigate the problem of using 3D beamforming in RIS-empowered wireless networks and propose a new scheme that provides more degrees of freedom in designing and deploying the RIS-based networks. In the proposed scheme, a base station (BS) equipped with a full dimensional array of antennas optimizes its radiation pattern in the three-dimensional space to …
We analytically derive from first physical principles the functional dependence of wireless channels on the RIS configuration for generic (i.e., potentially complex-scattering) RIS-parametrized radio environments. The wireless channel is a linear input-output relation that depends non-linearly on the RIS configuration because of two independent mechanisms: i) proximity-induced mutual coupling between close-by RIS elements; ii) reverberation-induced long-range coupling between all RIS elements. Mathematically, this "structural" non-linearity originates from the inversion of an "interaction" mat…
The performance characterization of communication systems assisted by large reconfigurable intelligent surfaces (RISs) significantly depends on the adopted models for the underlying channels. Under unrealistic channel models, the system performance may be over- or under-estimated which yields inaccurate conclusions for the system design. In this paper, we review five channel models that are chosen to progressively improve the modeling accuracy for large RISs. For each channel model, we highlight the underlying assumptions, its advantages, and its limitations. We compare the system performance …
In this paper, a novel concept called simultaneously transmitting and reflecting RIS (STAR-RIS) is introduced into the wireless-powered mobile edge computing (MEC) systems to improve the efficiency of energy transfer and task offloading. Compared with traditional reflecting-only RIS, STAR-RIS extends the half-space coverage to full-space coverage by simultaneously transmitting and reflecting incident signals, and also provides new degrees-of-freedom (DoFs) for manipulating signal propagation. We aim to maximize the total computation rate of all users, where the energy transfer time, transmit p…
