光机械（OM）腔同时局域化光子和声子，从而通过辐射压力增强它们的相互作用。这种声光相互作用可以通过单位机械位移引起的光频移 G 来量化。上述频移也可与真空 OM 耦合率 g0 相关联，其中通常仅考虑光弹（PE）和移动边界（MB）效应。然而，热光（TO）和热膨胀（ThE）效应也可能发挥作用，因为形成 OM 腔的材料可能会因光子的存在而被加热，这自然会影响腔的机械特性。在这项工作中，我们引入了一种新的理论方法来确定热效应如何改变标准 OM 耦合率。为了测试该模型，在由两种不同材料（硅和金刚石）制备的两个 OM 晶体腔中进行了全套光-热-机械模拟。我们的结果使我们得出结论，存在一个不可忽略的热修正，它始终作为 OM 耦合率的负频移出现，为了更准确地预测 OM 相互作用的强度，应考虑这一修正。
英文摘要：
Optomechanical (OM) cavities simultaneously localize photons and phonons, thus enhancing their mutual interaction through radiation-pressure force. This acousto-optic interaction can be quantified by means of the optical frequency shift per mechanical displacement G. The aforesaid frequency shift can also be related to the vacuum OM coupling rate, g0, where only photoelastic (PE) and moving boundaries (MB) effects are commonly taken into account. However, the thermo-optic (TO) and thermal expansion (ThE) effects may also play a role since the material forming the OM cavity could be heated by the presence of photons, which should naturally affect the mechanical properties of the cavity. In this work, we introduce a new theoretical approach to determine how thermal effects change the canonical OM coupling rate. To test the model, a complete set of optical-thermal-mechanical simulations has been performed in two OM crystal cavities fabricated from two different materials: silicon and diamond. Our results lead us to conclude that there is a non-negligible thermal correction that is always present as a negative shift to the OM coupling rate that should be considered in order to predict more accurately the strength of the OM interaction.
Optomechanical Brillouin nonlinearities -- arising from the coupling between traveling photons and phonons -- have become the basis for a range of powerful optical signal processing and sensing technologies. The dynamics of such interactions are largely set and limited by the host material's elastic, optical, and photo-elastic properties, which are generally considered intrinsic and static. Here we show for the first time that it is feasible to dynamically reconfigure the Brillouin nonlinear susceptibility in transparent semiconductors through acoustoelectric phonon-electron coupling. Acoustoe…
Due to recent development of growing and processing techniques for high-quality single crystal diamond, the large scale production of diamond optomechanical crystal cavities becomes feasible, enabling optomechanical devices that can operate in higher mechanical frequencies and be coupled to two-level systems based on diamond color centers. In this paper we describe a design optimization method to produce diamond optomechanical crystal (OMC) cavities operating at the high-cooperativity regime (close to unity) at room temperature.
Silicon on insulator photonics has offered a versatile platform for the recent development of integrated optomechanical circuits. However, there are some constraints such as the high cost of the wafers and limitation to a single physical device level. In the present work we investigate nanocrystalline silicon as an alternative material for optomechanical devices. In particular, we demonstrate that optomechanical crystal cavities fabricated of nanocrystalline silicon have optical and mechanical properties enabling non-linear dynamical behaviour and effects such as thermo-optic/free-carrier-disp…
The synchronization of coupled oscillators is a phenomenon found throughout nature. Mechanical oscillators are paradigmatic among such systems, but realising them at the nanoscale is challenging. We report synchronization of the mechanical dynamics of a pair of optomechanical crystal cavities that are intercoupled with a mechanical link and support independent optical modes. In this regime they oscillate in anti-phase, which is in agreement with the predictions of our numerical model that considers reactive coupling. Finally, we show how to temporarily disable synchronization of the coupled sy…
Optomechanical crystal cavities (OMCCs) are fundamental nanostructures for a wide range of phenomena and applications. Usually, optomechanical interaction in such OMCCs is limited to a single optical mode and a unique mechanical mode. In this sense, eliminating the single mode constraint - for instance, by adding more mechanical modes - should enable more complex physical phenomena, giving rise to a context of multimode optomechanical interaction. However, a general method to produce in a controlled way multiple mechanical modes with large coupling rates in OMCCs is still missing. In this work…
Lasers differ from other light sources in that they are coherent, and their coherence makes them indispensable to both fundamental research and practical application. In optomechanical cavities, phonon and photon lasing is facilitated by the ability of photons and phonons to interact intensively and excite one another coherently. The lasing linewidths of both phonons and photons are critical for practical application. However, thus far, these linewidths have not been explored in detail in cavity optomechanical systems. This study investigates the underlying dynamics of lasing in optomechanical…
We demonstrate acousto-optic phase modulators in X-cut lithium niobate films on sapphire, detailing the dependence of the piezoelectric and optomechanical coupling coefficients on the crystal orientation. This new platform supports highly confined, strongly piezoelectric mechanical waves without suspensions, making it a promising candidate for broadband and efficient integrated acousto-optic devices, circuits, and systems.
In this work, we study the dispersive coupling between optical quasi-bound-states in the continuum at telecom wavelengths and GHz-mechanical modes in high-index wavelength-sized disks. We show that such cavities can display values of the optomechanical coupling rate on par with optomechanical crystal cavities ($g_{0}/2π\backsimeq$ 800 kHz). Interestingly, optomechanical coupling of optical resonances with mechanical modes at frequencies well above 10 GHz seems attainable. We also show that mechanical leakage in the substrate can be extremely reduced by placing the disk over a thin silica pedes…
Lithium Niobate (LN or just niobate) thin-film micro-photonic resonators have promising prospects in many applications including high efficiency electro-optic modulators, optomechanics and nonlinear optics. This paper presents free-standing thin-film lithium niobate photonic resonators on a silicon platform using MEMS fabrication technology. We fabricated a 35um radius niobate disk resonator that exhibits high intrinsic optical quality factor (Q) of 484,000. Exploiting the optomechanical interaction from the released free-standing structure and high optical Q, we were able to demonstrate acous…
Nanobeam optomechanical crystals, in which localized GHz frequency mechanical modes are coupled to wavelength-scale optical modes, are being employed in a variety of experiments across different material platforms. Here, we demonstrate the electrostatic tuning and stabilization of such devices, by integrating a Si$_3$N$_4$ slot-mode optomechanical crystal cavity with a nanoelectromechanical systems (NEMS) element, which controls the displacement of an additional "tuning" beam within the optical near-field of the optomechanical cavity. Under DC operation, tuning of the optical cavity wavelength…
In the field of cavity optomechanics, proposals for quantum nondemolition (QND) measurements of phonon number provide a promising avenue by which one can study the quantum nature of nanoscale mechanical resonators. Here, we investigate these QND measurements for an optomechanical system whereby quadratic coupling arises due to shared symmetries between a single optical resonance and a mechanical mode. We establish a relaxed limit on the amount of linear coupling that can exist in this type of system while still allowing for a QND measurement of Fock states. This new condition enables optomecha…
Gallium phosphide offers an attractive combination of a high refractive index ($n>3$ for vacuum wavelengths up to 4 μm) and a wide electronic bandgap (2.26 eV), enabling optical cavities with small mode volumes and low two-photon absorption at telecommunication wavelengths. Heating due to strongly confined light fields is therefore greatly reduced. Here, we investigate the benefits of these properties for cavity optomechanics. Utilizing a recently developed fabrication scheme based on direct wafer bonding, we realize integrated one-dimensional photonic crystal cavities made of gallium phosphid…
Optomechanical structures are well suited to study photon-phonon interactions, and they also turn out to be potential building blocks for phononic circuits and quantum computing. In phononic circuits, in which information is carried and processed by phonons, optomechanical structures could be used as interfaces to photons and electrons thanks to their excellent coupling efficiency. Among the components required for phononic circuits, such structures could be used to create coherent phonon sources and detectors. Complex functions other than emission or detection remain challenging and addressin…
Frequency comb generation in active optomechanical cavities
Sri Guru Tegh Bahadur Khalsa College, University of Delhi（德里大学斯里古鲁泰格·巴哈杜尔·卡尔萨学院）；Birla Institute of Technology and Science Pilani, Dubai Campus（比拉理工学院迪拜校区）
The optical bistability have been studied theoretically in a multi-mode optomechanical system with two mechanical oscillators independently coupled to two cavities in addition to direct tunnel coupling between cavities. It is proved that the bistable behavior of mean intracavity photon number in the right cavity can be tuned by adjusting the strength of the pump laser beam driving the left cavity. And the mean intracavity photon number is relatively larger in the red sideband regime than that in the blue sideband regime. Moreover, we have shown that the double optical bistability of intracavit…
We propose a three-mode optomechanical system to realize optical nonreciprocal transmission with unidirectional amplification, where the system consists of two coupled cavities and one mechanical resonator which interacts with only one of the cavities. Additionally, the optical gain is introduced into the optomechanical cavity. It is found that for a strong optical input, the optical transmission coefficient can be greatly amplified in a particular direction and suppressed in the opposite direction. The expressions of the optimal transmission coefficient and the corresponding isolation ratio a…
Integrated optomechanical cavities stand as a promising means to interface mechanical motion and guided optical modes. State-of-the-art demonstrations rely on optical and mechanical modes tightly confined of in micron-scale areas to achieve strong optomechanical coupling. However, the need for tight optomechanical confinement and the general use of suspended devices hinders interaction with external devices, limiting the potential for the implementation of complex circuits. Here, we propose and demonstrate a new approach for optomechanical cavities coupling free-propagating surface acoustic wa…
We investigate theoretically the generation of nonlinear dissipative structures in optomechanical (OM) systems containing discrete arrays of mechanical resonators. We consider both hybrid models in which the optical system is a continuous multimode field, as it would happen in an OM cavity containing an array of micro-mirrors, and also fully discrete models in which each mechanical resonator interacts with a single optical mode, making contact with Ludwig & Marquardt [Phys. Rev. Lett. 101, 073603 (2013)]. Also, we study the connections between both types of models and continuous OM models. Whi…
Optical computing with integrated photonics brings a pivotal paradigm shift to data-intensive computing technologies. However, the scaling of on-chip photonic architectures using spatially distributed schemes faces the challenge imposed by the fundamental limit of integration density. Synthetic dimensions of light offer the opportunity to extend the length of operand vectors within a single photonic component. Here, we show that large-scale, complex-valued matrix-vector multiplications on synthetic frequency lattices can be performed using an ultra-efficient, silicon-based nanophotonic cavity …
The realization of photonic microwave oscillators using optomechanical cavities has recently become a reality. By pumping the cavity with a blue-detuned laser, the so-called phonon lasing regime - in which a mechanical resonance is amplified beyond losses - can be reached and the input signal gets modulated by highly-coherent tones at integer multiples of the mechanical resonance. \textcolor{Red}{Implementing optomechanical cavities on released films with high index of refraction can lead to optical modes at telecom wavelengths and mechanical resonances in the GHz scale, resulting in highly-st…
Recent scientific and technological advances have enabled the detection of gravitational waves, autonomous driving, and the proposal of a communications network on the Moon (Lunar Internet or LunaNet). These efforts are based on the measurement of minute displacements and correspondingly the forces or fields transduction, which translate to acceleration, velocity, and position determination for navigation. State-of-the-art accelerometers use capacitive or piezo resistive techniques, and micro-electromechanical systems (MEMS) via integrated circuit (IC) technologies in order to drive the transd…
Efficient interconversion of both classical and quantum information between microwave and optical frequency is an important engineering challenge. The optomechanical approach with gigahertz-frequency mechanical devices has the potential to be extremely efficient due to the large optomechanical response of common materials, and the ability to localize mechanical energy into a micron-scale volume. However, existing demonstrations suffer from some combination of low optical quality factor, low electrical-to-mechanical transduction efficiency, and low optomechanical interaction rate. Here we demon…
