We introduce multilayer structures with the phase-change material Ge$_2$Sb$_2$Te$_5$ (GST) for use as broadband switchable absorbers in the infrared wavelength range. We optimize both the material composition and the layer thicknesses of the multilayer structures, in order to maximize the difference between the absorption for GST in its crystalline phase and the absorption for GST in its amorphous phase in the wavelength range of interest. We show that in the optimized structures near perfect absorption can be switched to very low absorption in a broad wavelength range by switching GST from its crystalline to its amorphous phase. Our optimized lithography-free structures have better performance than harder-to-fabricate three-dimensional structures. Our results could pave the way to a new class of broadband switchable absorbers and thermal sources in the infrared wavelength range.
Dynamically switchable half-/quarter-wave plates have recently been the focus in the terahertz regime. Conventional design philosophy leads to multilayer metamaterials or narrowband metasurfaces. Here we propose a novel design philosophy and a VO2-metal hybrid metasurface for achieving broadband dynamically switchable half-/quarter-wave plate (HWP/QWP) based on the transition from the overdamped to the underdamped resonance. Results show that, by varying the VO2 conductivity by three orders of magnitude, the proposed metasurface's function can be switched between an HWP with polarization conve…
We demonstrate the broadband operation of a switchable terahertz quarter-wave plate achieved with an active metasurface employing vanadium dioxide. For this purpose, we utilize anisotropically deformed checkerboard structures, which present broadband characteristics compatible with deep modulation. Moreover, the metasurface is integrated with a current injection circuit to achieve state switching; this injection circuit can also be employed to monitor the electric state of vanadium dioxide. We estimate the Stokes parameters derived from the experimental transmission spectra of the fabricated m…
The question of how to continuously manipulate a photonic system between a radiating state and a bound state is an important challenge in photonics, as its solution promises broad technological relevance for optical sensors, modulators, switches and displays. Existing approaches utilise the inherent wave-nature of electromagnetic fields to their advantage, and are commonly identified as bound states in the continuum (BICs), as they resemble singular bound states embedded in a band of radiating states. Although quasi-BICs have been demonstrated for numerous symmetric periodic photonic crystals,…
Increasing attention on microwave ultra-broadband metamaterial absorbers has been paid due to their promising applications. While most microwave ultra-broadband metamaterial absorbers developed so far are based on metallic resonant structures, dispersive dielectric water-based metamaterial opens a simpler and more versatile route for the construction of polarization- and angle- insensitive ultra-broadband absorption. Here, we review the recent progresses of water-based metamaterial absorber by providing an illustration of the mechanisms to realize ultra-broadband, tunable and multi-functional …
A metamaterial composed of thin metallic strips as an efficient broadband absorber in the mid-infrared spectrum is investigated. Here the matching between dielectric and geometrical properties of the individual elements is critical to ensure high absorption. Detailed theoretical analysis based on the electric dipole approximation is performed to characterize the absorption and scattering properties of the individual elements of the unit cell and the results are used to design the metamaterial composed of such configurations. The absorption cross-section of a strip-shaped element can exceed its…
We propose a thin, compact, broadband, polarization and angle insensitive metamaterial absorber based on a tungsten reflector, silicon spacer and a top pattern composed of a double square-like ring resonator utilizing nickel(Ni). In such a structure, a high absorption (above 80 %) bandwidth ~ 4.8 μm from 3.52 up to 8.32 μm corresponding to the relative bandwidth ~81% can be achieved with deeply subwavelength unit cell dimensions. Here the physical origin of the broadband absorption is associated with low Q-factor dipole modes of the top pattern inner and outer sides functioning as rectangular …
In this paper, we analytically design a simple configuration of a broadband THz and polarization-insensitive absorber. The mentioned absorber consists of two layers of graphene disks, and the transmission line model is considered for the whole of the proposed absorber's structure to design it accurately. Therefore, the input admittance of the designed absorber is obtained by the transmission line model. Also, the real part of the input admittance is approximately tuned to be matched to the free space admittance. In contrast, the imaginary part of it is closely adjusted to zero around the centr…
In this paper, we analytically design a simple configuration of a broadband THz and polarization-insensitive absorber. The mentioned absorber consists of two layers of graphene disks, and the transmission line model is considered for the whole of the proposed absorber's structure to design it accurately. Therefore, the input admittance of the designed absorber is obtained by the transmission line model. Also, the real part of the input admittance is approximately tuned to be matched to the free space admittance. In contrast, the imaginary part of it is closely adjusted to zero around the centr…
Here we make use of vanadium dioxide (VO2) to design a bifunctional metasurface working at the same targeted frequency. With the increase of temperature, the functionality of the designed metasurface can switch from a multi-channel retroreflector to a perfect absorber, caused by the phase transition of VO2 from insulator to conductor. Different from traditional bifunctional metasurfaces designed by simple composition of two functionalities, our proposed bifunctional metasurface is based on the interaction between two functionalities. The device shows good potential for the combination of wavef…
We propose herein a method of material-structure integrated design for broadband absorption of dielectric metamaterial, which is achieved by combination of genetic algorithm and simulation platform. A multi-layered metamaterial absorber with an ultra-broadband absorption from 5.3 to 18 GHz (a relative bandwidth of as high as 109%) is realized numerically and experimentally. In addition, simulated results demonstrate the proposed metamaterial exhibits good incident angle and polarization tolerance, which also are significant criteria for practical applications. By investigating the working prin…
The Brewster's law predicts zero reflection of p-polarization on a dielectric surface at a particular angle. However, when loss is introduced into the permittivity of the dielectric, the Brewster condition breaks down and reflection unavoidably appears. In this work, we found an exception to this long-standing dilemma by creating a class of nonmagnetic anisotropic metamaterials, where an anomalous Brewster effects with independently tunable absorption and refraction emerges. This loss-independent Brewster effect is bestowed by the extra degrees of freedoms introduced by anisotropy and strictly…
We theoretically investigate photothermal heating of ultra-flexible metamaterials, which are obtained by randomly mixing TiN nanoparticles in polydimethylsiloxane (PDMS). Due to the plasmonic properties of TiN nanoparticles, incident light is perfectly absorbed in a broadband range (300-3000 nm) to generate heat within these metamaterials. Under irradiation of an 808 nm near-infrared laser with different intensities, our predicted temperature rises as a function of time agree well with recent experimental data. For a given laser intensity, the temperature rise varies non-monotonically with con…
Complete absorption of electromagnetic waves is paramount in today's applications, ranging from photovoltaics to cross-talk prevention into sensitive devices. In this context, we use a genetic algorithm (GA) strategy to optimize absorption properties of periodic arrays of truncated square-based pyramids made of alternating stacks of metal/dielectric layers. We target ultra-broadband quasi-perfect absorption of normally incident electromagnetic radiations in the visible and near-infrared ranges (wavelength comprised between 420 and 1600 nm). We compare the results one can obtain by considering …
Coherent perfect absorption (CPA) refers to interferometrically induced complete absorption of incident light by a partial absorber independently of its intrinsic absorption (which may be vanishingly small) or its thickness. CPA is typically realized in a resonant device, and thus cannot be achieved over a broad continuous spectrum, which thwarts its applicability to photodetectors and solar cells, for example. Here, we demonstrate broadband omni-resonant CPA by placing a thin weak absorber in a planar cavity and pre-conditioning the incident optical field by introducing judicious angular disp…
We report generation of spectrally bright vacuum ultraviolet (VUV) and deep UV (DUV) coherent radiations driven by quantum coherence in tunnel-ionized carbon monoxide (CO) molecules. Our technique allows us to switch between multiple wavelengths provided by the abundant energy levels of molecular ions. The DUV/VUV sources can have arbitrary polarization states by manipulating the pump laser polarization. The superior temporal and spectral properties of the developed source give rise to a broadband Raman comb in the DUV/VUV region.
