arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2310.13359eess.SYcs.SYeess.SP
收藏

分布式参数传输线上的电气故障定位

Electrical Fault Localisation Over a Distributed Parameter Transmission Line

Daniel Selvaratnam, Amritam Das, Henrik Sandberg

AI总结:

针对电力线故障定位问题,提出基于Telegrapher's equation的频域参数估计方法,通过非线性最小二乘优化搜索故障位置,并设计端到端算法经仿真验证有效。

摘要:

受沿电力线定位故障需求的驱动,本文采用频域方法对具有一个空间变量的无限维线性动态系统进行参数估计。由于故障发生时间未知,且电压和电流仅在传输线一端测量,因此必须从故障后瞬态中提取距离信息。为准确考虑高频瞬态行为,线路动力学直接由Telegrapher's equation建模,而非更常用的集总参数近似。首先,对控制方程进行无量纲化以避免病态问题。随后推导出传递函数的闭式表达式。最后,采用非线性最小二乘优化来搜索故障位置。此外,还提出了对故障带宽、传感器带宽和仿真时间步长的要求。最终提出了一种用于数据生成和故障定位的新型端到端算法,并通过仿真验证了其有效性。

英文摘要:

Motivated by the need to localise faults along electrical power lines, this paper adopts a frequency-domain approach to parameter estimation for an infinite-dimensional linear dynamical system with one spatial variable. Since the time of the fault is unknown, and voltages and currents are measured at only one end of the line, distance information must be extracted from the post-fault transients. To properly account for high-frequency transient behaviour, the line dynamics is modelled directly by the Telegrapher's equation, rather than the more commonly used lumped-parameter approximations. First, the governing equations are non-dimensionalised to avoid ill-conditioning. A closed-form expression for the transfer function is then derived. Finally, nonlinear least-squares optimisation is employed to search for the fault location. Requirements on fault bandwidth, sensor bandwidth and simulation time-step are also presented. The result is a novel end-to-end algorithm for data generation and fault localisation, the effectiveness of which is demonstrated via simulation.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑