arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1508.01162cond-mat.supr-concs.SYeess.SYphysics.ins-det
收藏

在电力网络中实现电阻型超导故障电流限制器:性能分析与最优位置测量

Implementation of Resistive Type Superconducting Fault Current Limiters in Electrical Grids: Performance Analysis and Measuring of Optimal Locations

University of Cambridge(剑桥大学);University of Leicester(莱斯特大学)

Xiuchang Zhang, H. S. Ruiz, Z. Zhong, T. A. Coombs

AI总结:

本文研究了电阻型超导故障电流限制器在电力网络中的性能及安装位置优化,通过比较不同模型的故障电流减少效果,分析其对电网性能的影响。

摘要:

过去几年中,输电和配电网的短路电流水平显著上升,这是由于电力需求增加和分布式电源接入所致。这导致了新型保护系统如超导故障电流限制器(SFCLs)的集成需求。SFCL模型在电力配电网中主要依赖于插入一个由预定义淬火时间决定的阶梯或指数电阻。然而,在这些模型之外,对SFCL单独或多个安装在电网中的性能、可靠性和安装位置策略的研究仍缺乏适当的发展,因此需要全面且系统的研究。本文通过考虑SFCL的实际行为,即电场与电流密度之间温度动态的功率律依赖性,扩展了上述模型的范围。研究结果与阶梯电阻模型进行比较,以讨论和澄清结论。两种SFCL模型都被整合到基于英国电力标准构建的电力系统模型中,研究了这些保护策略对整体电力网络性能的影响。作为可再生能源的代表,90 MVA风电场被用于模拟。模拟了三种故障情况,并在多个电流测量点和分配策略下比较了两种故障电流限制模型预测的故障电流减少量。

英文摘要:

In the past few years there has been a significant rise in the short-circuit current levels in transmission and distribution networks, it due to the increasing demands on power and the addition of sources of distributed generations. It leads to the need of integration of novel protection systems such as the superconducting fault current limiters (SFCLs), ... . SFCL models on the electric distribution networks largely rely on the insertion of a step or exponential resistance that is determined by a predefined quenching time. However, beyond the framework of these models, the study of the performance, reliability, and location strategy for the installation of sole or multiple SFCLs in power grids still lacks of proper development leading to the utter need of comprehensive and systematic studies on this issue. In this paper, we expand the scope of the aforementioned models by considering the actual behaviour of a SFCL in terms of the temperature dynamic power-law dependence between the electrical field and the current density. Our results are compared with step-resistance models for the sake of discussion and clarity of the conclusions. Both SFCL models were integrated into a power system model built based on the UK power standard, and the impact of these protection strategies on the performance of the overall electricity network was studied. As a representative renewable energy source, a 90 MVA wind farm was considered for the simulations. Three fault conditions have been simulated, and the figures for the fault current reduction predicted by both fault current limiting models have been compared in terms of multiple current measuring points and allocation strategies...

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑