材料研究中的一个重大挑战是确定成分与性能之间的关系。在此,我们探索了这种关系在磁性能方面的表现,具体针对铁氧体的磁饱和(M$_s$)和磁各向异性能(MAE)。铁氧体是源自磁铁矿(化学式为Fe$_3$O$_4$)的材料,由Fe、Mn、Ni、Co、Cu和Zn等金属元素以某种组合构成。它们被用于电磁学、磁热疗和磁成像等多种应用。在实验上,磁性材料的合成与表征非常耗时。为了提供有助于指导合成的见解,我们使用密度泛函理论(DFT)计算了铁氧体成分与磁性能之间的关系。具体而言,我们计算了571个铁氧体结构的M$_s$和MAE,这些结构的化学式为M1$_x$M2$_y$Fe$_{3-x-y}$O$_4$,其中M1和M2可以是Mn、Ni、Co、Cu和/或Zn,且0 $\le$ x $\le$ 1,y = 1 - x。通过改变成分,我们能够将计算得到的M$_s$和MAE值分别改变高达9.6$\times$10$^5$ A m$^{-1}$和14.1$\times$10$^5$ J m$^{-3}$。我们的结果表明,成分可以用于优化加热、成像和记录等应用中的磁性能。这主要通过改变M$_s$来实现,因为这些应用对M$_s$的变化比对MAE的变化更敏感。
英文摘要:
A grand challenge in materials research is identifying the relationship between composition and performance. Herein, we explore this relationship for magnetic properties, specifically magnetic saturation (M$_s$) and magnetic anisotropy energy (MAE) of ferrites. Ferrites are materials derived from magnetite (which has the chemical formulae Fe$_3$O$_4$) that comprise metallic elements in some combination such as Fe, Mn, Ni, Co, Cu and Zn. They are used in a variety of applications such as electromagnetism, magnetic hyperthermia, and magnetic imaging. Experimentally, synthesis and characterization of magnetic materials is time consuming. In order to create insight to help guide synthesis, we compute the relationship between ferrite composition and magnetic properties using density functional theory (DFT). Specifically, we compute M$_s$ and MAE for 571 ferrite structures with the formulae M1$_x$M2$_y$Fe$_{3-x-y}$O$_4$, where M1 and M2 can be Mn, Ni, Co, Cu and/or Zn and 0 $\le$ x $\le$ 1 and y = 1 - x. By varying composition, we were able to vary calculated values of M$_s$ and MAE by up to 9.6$\times$10$^5$ A m$^{-1}$ and 14.1$\times$10$^5$ J m$^{-3}$, respectively. Our results suggest that composition can be used to optimize magnetic properties for applications in heating, imaging, and recording. This is mainly achieved by varying M$_s$, as these applications are more sensitive to variation in M$_s$ than MAE.
High coercivity induced by mechanical milling in cobalt ferrite powders
在这项工作中,我们报告的研究亚铁磁性氧化物CoFe 2 O 4的磁行为处理的机械研磨与不同的磨球。采用简单的水热法制备了钴铁氧体纳米粒子,并在500 ℃下进行了退火处理。未研磨的样品呈现约1.9kOe的磁化率、69.5emu/g的饱和磁化强度和0.42的剩磁比。球磨后,两种样品的磁化强度分别为4.2和4.1kOe,饱和磁化强度分别为67.0和71.4emu/g。这些样品的剩磁比MR/MS分别增加到0.49和0.51。为了研究这些样品的磁行为的微观结构的影响,我们使用X射线粉末衍射(XPD),透射电子显微镜(TEM),和振动样品磁强计(VSM)。通过Williamson-Hall图的XPD分析用于估计样品中由机械研磨引起的平均微晶尺寸和应变。
Effect of Zn substitution on morphology and magnetic properties of copper ferrite nanofibers
采用静电纺丝结合溶胶-凝胶法制备了0 < x < 1的尖晶石型Cu 1-xZn xFe 2 O 4铁氧体纳米纤维。研究了锌离子取代对铜铁氧体形貌、结构和磁性能的影响。结果表明,CuFe 2 O 4纳米纤维表面具有较小的开孔,而掺杂后的纳米纤维表面光滑致密。随着Zn取代量的增加,饱和磁化强度先增大后减小,在x = 0.4时达到最大值58.4emu/g,矫顽力和平方比均减小。取代对磁性能的影响与尖晶石晶格间的阳离子交换作用有关。
Low temperature ferromagnetic properties, magnetic field induced spin order and random spin freezing effect in Ni1.5Fe1.5O4 ferrite; prepared at different pH values and annealing temperatures
Chemical synthesis and magnetic properties of monodisperse cobalt ferrite nanoparticles
在这项工作中,一个成功的合成磁性钴铁氧体(CoFe 2 O 4)纳米粒子。合成的CoFe 2 O 4纳米粒子具有球形形状,在所选择的溶剂中高度单分散。研究了不同反应条件如温度、反应时间和不同封端剂对产物物相和形貌的影响。扫描透射电子显微镜显示,这些纳米粒子的大小可以通过改变反应条件来控制。X射线衍射和能量色散X射线光谱证实了立方对称的CoFe 2 O 4尖晶石结构的形成。由于优化的反应参数,每个纳米颗粒被证明是一个单一的磁畴的直径范围从6到16 nm。最后,磁性研究表明,所获得的纳米粒子是超顺磁性的小矫顽力值约315 Oe和饱和磁化强度为58 emu/g在室温下。这些结果使得钴铁氧体纳米颗粒有望用于先进的磁性纳米器件和生物磁性应用。
Magnetic, Optoelectronic, and Rietveld refined structural properties of Al3+ substituted nanocrystalline Ni-Cu spinel ferrites: An experimental and DFT based study
Enhancement in Magnetic and Magnetocaloric Properties of CoFe2O4 Nanofibers at Lower Temperatures
Cadi- Ayyad University(卡迪·阿亚德大学);Jozef Stefan Institute(约瑟夫·斯蒂芬研究所);University of Picardie Jules Verne(皮卡第朱尔·凡尔纳大学);Institute of Mathematics, Physics and Mechanics & University of Ljubljana, Faculty of Civil and Geodetic Engineering(卢布尔雅那大学土木与测量工程学院数学、物理与力学研究所)