arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2308.04652physics.flu-dyn
收藏

雾化状态下圆形与非圆形孔口喷雾的液滴尺寸特性

Drop size characteristics of sprays emanating from circular and non-circular orifices in the atomization regime

K. R. Rajesh, V. Kulkarni, S. Vankeswaram, R. Sakthikumar, S. Deivandren

AI总结:

本文实验研究了相同出口面积下圆形与椭圆、三角、方形孔口煤油射流的雾化特性,发现非圆形孔口因液丝和液核破碎导致SMD增大,并揭示了液滴尺寸分布随韦伯数和距离由双峰向单峰转变的规律。

摘要:

传统上,圆形孔口一直被用于生成气溶胶,但近年来非圆形孔口因其更优越的雾化和混合特性而受到关注。在本工作中,我们实验研究了煤油(Jet A-1)射流从三种非圆形孔口几何形状(椭圆形、三角形和正方形)以及一个具有相同出口横截面积的圆形孔口喷出时的喷雾形态和液滴尺寸特性。我们的结果显示出一种出乎意料且尚未报道的非圆形孔口射流雾化粗化现象,其表现为在以液体韦伯数$We_l$表示的所有测试出口速度下,Sauter平均直径(SMD)均有所增大。我们将此归因于两种不同的喷雾形态:液丝破碎和液核破碎,它们会产生被识别为液丝和韧带的大尺寸液体结构,与圆形孔口射流相比,这些结构在非圆形孔口射流中更为明显。通过进一步考察在较低$We_l$下、对应于一次破碎结束位置处的液滴尺寸体积概率分布,我们发现由于喷雾形态的影响,小尺寸和大尺寸碎片的主导分布导致了双峰性。在较高$We_l$和距喷注器出口更远的距离处,我们观察到所有孔口射流的双峰分布均转变为单峰分布,且单一峰值位于较小的液滴直径处。在所有非圆形孔口射流中,液丝破碎被认为是三角形喷雾中较小液滴尺寸数量更多的原因,而圆形孔口喷雾中更细的液丝使其液滴尺寸比呈现相同破碎形态的三角形对应物更小。我们期望我们的结果能够帮助发动机燃料燃烧、药物喷雾以及通过NaOH喷雾捕集CO$_2$等多种应用。

英文摘要:

Traditionally, circular orifices have been used for generating aerosols, however in recent times non-circular orifices are being considered due to their superior atomization and mixing features. In this work, we experimentally investigate spray morphology and drop size characteristics of kerosene (Jet A-1) jets issuing from three non-circular orifices geometries (elliptic, triangular and, square) and one circular orifice with the same exit cross sectional area. Our results show an unexpected and yet unreported coarsening of atomization for non-circular orifice jets quantified by an increase in the Sauter Mean Diameter (SMD) at all tested exit velocities represented by the liquid Weber number, $We_l$. We attribute this to two distinct spray morphologies: filament and core breakup which generate large size liquid structures identified as filaments and ligaments, noticeable in non-circular orifices jets compared to circular orifice jets. On exploring this further by undertaking an examination of the drop size volume probability distribution at lower $We_l$ corresponding to the location marking the end of primary breakup we see a bimodality due to a dominant distribution of fragments of small and larger sizes owing to the spray morphology. At higher $We_l$ and larger distances from the injector exit we observe the bimodality converts to a unimodal distribution for all orifice jets with a single peak situated at lower drop diameters. Filament breakup is reasoned to be the cause of higher number of smaller drop sizes in triangular sprays among all non-circular orifice jets while thinner filaments in circular orifice sprays lead to smaller drop sizes compared to their triangular counterparts showing the same breakup morphology. We expect our results to help applications as diverse as engine fuel combustion, pharmaceutical sprays and CO$_2$ capture by NaOH sprays.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑