This paper investigates an indoor hybrid visible light communication (VLC) and radio frequency (RF) scenario with two-hop downlink transmission. A light emitting diode (LED) transmits both data and energy via VLC to an energy-harvesting relay node, which then uses the harvested energy to retransmit the decoded information to an RF user in the second phase. The design parameters include the direct current (DC) bias and the time allocation for VLC transmission. We formulate an optimization problem to maximize the data rate under decode-and-forward relaying with fixed receiver orientation. The non-convex problem is decomposed into two sub-problems, solved iteratively by fixing one parameter while optimizing the other. Additionally, we analyze the impact of random receiver orientation on the data rate, deriving closed-form expressions for both VLC and RF rates. An exhaustive search approach is employed to solve the optimization, demonstrating that joint optimization of DC bias and time allocation significantly enhances the data rate compared to optimizing DC bias alone.
In this paper, we consider an indoor downlink dual-hop hybrid visible light communication (VLC)/radio frequency (RF) scenario. For each transmission block, we dynamically allocate a portion of time resources to VLC and the other portion to RF transmission. In the first phase (i.e., VLC transmission), the LED carries both data and energy to an energy harvester relay node. In the second phase (i.e., RF communication), the relay utilizes the harvested energy to re-transmit the decoded information to the far RF user. During this phase, the LED continues to transmit power (no information) to the re…
In this paper, we study the time allocation optimization problem to maximize the sum throughput in a dual-hop heterogeneous visible light communication (VLC)/radio frequency (RF) communication system. Two scenarios are investigated in this paper. For the first scenario, we consider an optical wireless powered communication network (WPCN) in which all users harvest energy from the received lightwave over downlink (DL), and then they use the harvested energy to transmit information signals in the uplink (UL) channels based on the time division multiple access (TDMA) scheme. The optimal time allo…
Visible light communication (VLC) enables access to huge unlicensed bandwidth, a higher security level, and no radio frequency interference. With these advantages, VLC emerges as a complementary solution to radio frequency communications. VLC systems have primarily been designed for indoor scenarios with typical transmission distances between 2 and 5 m. Different designs would be required for larger distances. This paper proposes for the first time the use of a liquid crystal (LC)-based re-configurable intelligent surface (RIS) on improving the VLC signal detection and transmission range. An L…
In this paper, we introduce a couple of hardware implementations of compact VLC transmitter and receiver for the first time. Compared with related works, our VLC transmitter is non-RLL one, that means flicker mitigation can be guaranteed even without RLL codes. In particular, we have utilized a centralized bit probability distribution of a prescrambler and a Polar encoder to create a non-RLL flicker mitigation solution. Moreover, at the receiver, a 3-bit soft-decision filter is proposed to analyze signals received from real VLC channel to extract log-likelihood ratio (LLR) values and feed them…
A system that employs wavelength division multiplexing (WDM) in conjunction with subcarrier multiplexing (SCM) tones is proposed to realize high data rate multi-user indoor visible light communication (VLC). The SCM tones, which are unmodulated signals, are used to identify each light unit, to find the optimum light unit for each user and to calculate the level of the co-channel interference (CCI). WDM is utilized to attain a high data rate for each user. In this paper, multicolour (four colours) laser diodes (LDs) are utilized as sources of lighting and data communication. One of the WDM colo…
The emergence of visible light communication (VLC) technology as a solution to solve radio frequency impediments, such as spectrum shortage, is continuously appealing. In addition to its large and unlicensed bandwidth, VLC provides a high level of security in a closed room with zero radio frequency interference. However, loss of the VLC signal is experienced when the receiver rotates or moves. This challenge requires a special solution for integration into portable devices. On the other hand, re-configurable intelligent surface (RIS) is a technology exploited in radio frequency to solve dead z…
One of the main aims of indoor visible light communication (VLC) systems is to deliver a high data rate service in single user and in multiuser scenarios. A key obstacle is the ability of the indoor VLC channel to support high data rates in the scenarios of interest. Here, we assess the potential of a multi-branch transmitter (MBT) and its use to achieve higher data rates in single user and multiuser indoor VLC systems. For the single user VLC system, the performance of the MBT is examined with a wide field of view (W-FOV) receiver and an angle diversity receiver (ADR) while for the multiuser …
In this paper, we propose an online power allocation scheme to maximize the time averaged sum rate for multiple downlink receivers with energy harvesting transmitter. The transmitter employs non-orthogonal multiple access (NOMA) and/or orthogonal multiple access (OMA) to transmit data to multiple users. Additionally, we consider the scenario where each individual user has a quality of service constraint on its required instantaneous rate. The decisions of total transmit power and power allocation for different users in a given time slot are obtained with the help of Lyapunov optimization techn…
Providing uplink high data rate is one of the big concerns in visible light communication (VLC) systems. This paper introduces an uplink VLC system based on an infrared transmitter with beam steering to provide high data rates. In this work, a 4 branches angle diversity receiver (ADR) is used and the resultant delay spread and SNR are examined. The proposed system achieved data rates up to 3.57 Gb/s using simple on-off-keying (OOK).
Providing high data rates is one of the big concerns in visible light communication (VLC) systems. This paper introduces a data centre design that use a VLC system for downlink communication. In this work, RYGB laser diodes (LD) are used as transmitters to obtain a high modulation bandwidth. Three types of receivers, wide field of view receiver (WFOVR), 3 branches angle diversity receiver (ADR) and 50 pixels imaging receiver (ImR) are used to examine delay spread and SNR. The proposed system achieved data rates up to 14.2 Gbps using simple on-off-keying (OOK) modulation.
The visible light communication (VLC) technology has attracted much attention in the research of the sixth generation (6G) communication systems. In this paper, a novel three dimensional (3D) space-time-frequency non-stationary geometry-based stochastic model (GBSM) is proposed for indoor VLC channels. The proposed VLC GBSM can capture unique indoor VLC channel characteristics such as the space-time-frequency non-stationarity caused by large light-emitting diode (LED) arrays in indoor scenarios, long travelling paths, and large bandwidths of visible light waves, respectively. In addition, the …
Visible Light Communication (VLC) systems have relatively higher security compared with traditional Radio Frequency (RF) channels due to line-of-sight (LOS) propagation. However, they still are susceptible to eavesdropping. The proposed solution of the papers have been built on existing work on hyperchaos-based security measure to increase physical layer security from eavesdroppers. A fourth-order Henon map is used to scramble the constellation diagrams of the transmitted signals. The scramblers change the constellation symbol of the system using a key. That key on the receiver side de-scrambl…
Data-Aided Variational Bayesian Inference for CSI Estimation over Doubly-Selective DCO-OTFS MIMO VLC Systems with Affine-Precoded Superimposed Training Sequences
Indian Institute of Technology Kanpur（坎普尔印度理工学院）；Indian Institute of Technology Jodhpur（焦特普尔印度理工学院）
针对双选择性DCO-OTFS MIMO VLC系统，提出基于仿射预编码叠加训练序列的架构，并开发数据辅助变分贝叶斯推断方法，实现联合CSI估计与数据检测，显著降低NMSE、导频开销和SER。
Visible light communication (VLC) based localization is a potential candidate for wide range indoor localization applications. In this paper, we propose a VLC architecture based on orthogonal frequency division multiplexing (OFDM) with multiple functionalities integrated in the same system, i.e., the 3- D receiver location, the control of the room illumination intensity, as well as the data transmission capability. Herein we propose an original methodology for LED power discrimination applying spatial optical OFDM (SO-OFDM) structure for position estimation. The hybrid locator initially makes …
This paper investigates a hybrid radio frequency (RF)/visible light communication (VLC) ultra-small cell network consisting of multiple optical angle-diversity transmitters, one multi-antenna RF access point (AP), and multiple terminal devices. In the network, the optical transmitters play the primary role and are responsible for delivering information and power over the visible light, while the RF AP acts as a complementary power transfer system. Thus, we propose a novel collaborative RF and lightwave resource allocation scheme for hybrid RF/VLC ultra-small cell networks. The proposed scheme …
Visible light communication (VLC)-based beacon systems, which usually transmit identification (ID) information in small-size data frames are applied widely in indoor localization applications. There is one fact that flicker of LED light should be avoid in any VLC systems. Current flicker mitigation solutions based on run-length limited (RLL) codes suffer from reduced code rates, or are limited to hard-decoding forward error correction (FEC) decoders. Recently, soft-decoding techniques of RLL-codes are proposed to support soft-decoding FEC algorithms, but they contain potentials of high-complex…
The achievable data rate in indoor wireless systems that employ visible light communication (VLC) can be limited by multipath propagation. Here, we use computer generated holograms (CGHs) in VLC system design to improve the achievable system data rate. The CGHs are utilized to produce a fixed broad beam from the light source, selecting the light source that offers the best performance. The CGHs direct this beam to a specific zone on the room's communication floor where the receiver is located. This reduces the effect of diffuse reflections. Consequently, decreasing the intersymbol interference…
In this work, we examine the potential of autonomous operation of a reconfigurable intelligent surface (RIS) using wireless energy harvesting from information signals. To this end, we first identify the main RIS power-consuming components and introduce a suitable power-consumption model. Subsequently, we introduce a novel RIS power-splitting architecture that enables simultaneous energy harvesting and beamsteering. Specifically, a subset of the RIS unit cells (UCs) is used for beamsteering while the remaining ones absorb energy. For the subset allocation, we propose policies obtained as soluti…
In this paper the secure performance for the visible light communication (VLC) system with multiple eavesdroppers is studied. By considering the practical amplitude constraint instead of an average power constraint in the VLC system, the closed-form expressions for the upper and the lower bounds of the secrecy outage probability and the average secrecy capacity are derived. Since the locations for both legitimate receiver and eavesdroppers are unknown as well as random, the stochastic geometry method is introduced for problem formulation. Moreover, accurate expressions with a low computational…
This letter investigates a multiple-input multiple-output (MIMO) wireless power transfer (WPT) system under practical non-liner energy harvesting (EH) models. We propose a new generic energy receiver (ER) architecture consisting of $N$ receive antennas and $L$ rectifiers, for which one power splitter is inserted after each antenna to adaptively split the received radio frequency (RF) signals among the $L$ rectifiers for efficient non-linear RF-to-direct current (DC) conversion. With the proposed architecture, we maximize the total harvested DC power at the ER, by jointly optimizing the transmi…
Collision avoidance and platooning applications require vehicle localization at cm-level accuracy and at least 50 Hz rate for full autonomy. The RADAR/LIDAR and camera based methods currently used for vehicle localization do not satisfy these requirements, necessitating complementary technologies. Visible light positioning (VLP) is a highly suitable complementary technology due to its high accuracy and high rate, exploiting the line-of-sight propagation feature of the visible light communication (VLC) signals from LED head/tail lights. However, existing vehicular VLP algorithms impose restrict…
In this paper, we propose joint beamforming and photo-detector (PD) orientation (BO) optimization schemes for mobile visible light communication (VLC) with the orientation adjustable receiver (OAR). Since VLC is sensitive to line-of-sight propagation, we first establish the OAR model and the human body blockage model for mobile VLC user equipment (UE). To guarantee the quality of service (QoS) of mobile VLC, we jointly optimize BO with minimal UE the power consumption for both fixed and random UE orientation cases. For the fixed UE orientation case, since the {transmit} beamforming and the PD …
In this paper, we present the first indoor light-based detection and localization system that builds on concepts from radio detection and ranging (radar) making use of the expected growth in the use and adoption of visible light communication (VLC), which can provide the infrastructure for our LiDAL system. Our system enables active detection, counting and localization of people, in addition to being fully compatible with existing VLC systems. In order to detect human (targets), LiDAL uses the visible light spectrum, it sends pulses using a VLC transmitter and analyses the reflected signal col…
The directionality of optical signals provides an opportunity for efficient space reuse of optical links in visible light communication (VLC). Space reuse in VLC can enable multiple access communication from multiple light emitting transmitters. However, traditional VLC system design using photo-receptors requires at least one receiving photodetector element for each light emitter, thus constraining VLC to always require a light emitter-to-light receiving element pair. In this paper, we propose, design and evaluate a novel architecture for VLC that can enable multiple-access reception using a …
In this paper, we investigate the performance of simultaneous wireless information and power transfer (SWIPT) in a point-to-point system, adopting practical $M$-ary modulation. We take into account the fact that the receiver's radio-frequency (RF) energy harvesting circuit can only harvest energy when the received signal power is greater than a certain sensitivity level. For both power-splitting (PS) and time-switching (TS) schemes, we derive the energy harvesting performance as well as the information decoding performance for the Nakagami-$m$ fading channel. We also analyze the performance tr…
Statistical Inference-Based Channel Estimation for LD-Driven Visible Light O-OFDM Systems in the Presence of Relative Intensity and Input-Signal-Dependent Shot Noise
Indian Institute of Technology Kanpur（坎普尔印度理工学院）；Indian Institute of Technology Jodhpur（焦特普尔印度理工学院）；University of Southampton（南安普顿大学）
Providing high data rates is one of the drivers in visible light communication (VLC) systems. This paper introduces a VLC system that employs transmitters diversity with beam steering to provide high data rates. In this work, red, yellow, green, and blue (RYGB) laser diodes (LD) are used as transmitters to obtain a high modulation bandwidth. Two types of RYGB LDs units are used in this paper: transmitters diversity (TD) RYGB LDs light unit (for illumination and communication) and RYGB LDs light unit (for illumination). In addition, a seven branch angle diversity receiver (ADR) is used where we…
The orthogonal frequency division multiplexing (OFDM) transmission has shown promise in applications of visible light communication (VLC). However, the variation of the nonlinearity of the optical power emitted by the high power light emitting diode (HPLED) as a function of current and temperature implies in drastic OFDM-VLC performance degradation. The first part of this work, experimentally confirms and models this degradation due to temperature in a high power white HPLED. The higher attenuation at high frequencies, which is inherent to the HPLED and which is accentuated by the effect of th…
In this paper, a non-orthogonal multiple access (NOMA) visible light communication (VLC) system is investigated. The system uses angle diversity receivers (ADRs) to provide high data rates. The ADR has 4 branches, each directed to a different direction. An 8m x 4m sized room is modelled to study the resource allocation to users according to their channel conditions to maximize the data rate. The results show that using ADRs improves the data rate by an average of 35% compared to a system using wide FOV receivers.
We study an unmanned aerial vehicle (UAV) identification network equipped with an energy harvesting (EH) technique. In the network, the UAVs harvest energy through radio frequency (RF) signals transmitted from ground control stations (GCSs) and then transmit their identification information to the ground receiver station (GRS). Specifically, we first derive a closed-form expression of the outage probability to evaluate the network performance. Then we obtain the closed-form expression of the optimal time allocation when the bandwidth is equally allocated to the UAVs. We also propose a fast-con…
Sparse code multiple access (SCMA), as a code-domain non-orthogonal multiple access (NOMA) scheme, has received considerable research attention for enabling massive connectivity in future wireless communication systems. In this paper, we present a novel codebook (CB) design for SCMA based visible light communication (VLC) system, which suffers from shot noise. In particular, we introduce an iterative algorithm for designing and optimizing CB by considering the impact of shot noise at the VLC receiver. Based on the proposed CB, we derive and analyze the theoretical bit error rate (BER) expressi…
Visible Light Communication~(VLC) systems provide not only illumination and data communication, but also indoor monitoring services if the effect that different events create on the received optical signal is properly tracked. For this purpose, the Channel State Information that a VLC receiver computes to equalize the subcarriers of the OFDM signal can be also reused to train an Unsupervised Learning classifier. This way, different clusters can be created on the collected CSI data, which could be then mapped into relevant events to-be-monitored in the indoor environments, such as the presence …
We propose an enhanced spatial modulation (SM)-based scheme for indoor visible light communication systems. This scheme enhances the achievable throughput of conventional SM schemes by transmitting higher order complex modulation symbol, which is decomposed into three different parts. These parts carry the amplitude, phase, and quadrant components of the complex symbol, which are then represented by unipolar pulse amplitude modulation (PAM) symbols. Superposition coding is exploited to allocate a fraction of the total power to each part before they are all multiplexed and transmitted simultane…
Photovoltaic (PV) modules have been employed in visible light communication (VLC) for simultaneous energy harvesting and data reception. A PV-based receiver features easy optical alignment and self-powered operation. It is commonly assumed that PV modules in VLC have a linear optical-electrical response, which is generally true under high illumination levels. This paper will illustrate the exacerbated PV's nonlinear distortion when under typical indoor illumination. The nonlinearity of a PV module for different numbers of PV cells is also characterized. We investigated the transmission perform…
For dynamic visible light communication (VLC) systems, received optical power fluctuates largely due to the fast movement of VLC terminals. Such fluctuations will cause possible signal clipping and quantization noise at the analog-to-digital converters (ADCs) and thus aggravate signal-to-noise ratio (SNR) and reliability of the communication link. To mitigate this effect, the automatic gain control (AGC) technique is often introduced in the receiver front-end to adaptively adjust the electrical signal strength. In this paper, we provided a VLC front-end analysis considering AGC model. Based on…
We consider an energy harvesting transmitter sending status updates to a receiver over an erasure channel, where each status update is of length $k$ symbols. The energy arrivals and the channel erasures are independent and identically distributed (i.i.d.) and Bernoulli distributed in each slot. In order to combat the effects of the erasures in the channel and the uncertainty in the energy arrivals, we use channel coding to encode the status update symbols. We consider two types of channel coding: maximum distance separable (MDS) codes and rateless erasure codes. For each of these models, we st…
In this paper, we study the multiple-input and multiple-output (MIMO) wireless power transfer (WPT) system so as to enhance the output DC power of the rectennas. To that end, we revisit the rectenna nonlinearity considering multiple receive antennas. Two combining schemes for multiple rectennas at the receiver, DC and RF combinings, are modeled and analyzed. For DC combining, we optimize the transmit beamforming, adaptive to the channel state information (CSI), so as to maximize the total output DC power. For RF combining, we compute a closed-form solution of the optimal transmit and receive b…
In this letter, we consider the control of an energy self-sufficient receiver in a multi-access network with simultaneous wireless information and energy transfer. Multiple transmitters send data to a common receiver whose only source of energy is a finite size battery which is recharged only from the energy harvested from incoming RF signals. The nodes access the channel randomly resulting in a packet collision when multiple transmitters simultaneously access the channel. The receiver takes samples from the received RF signal to calculate the probability of a collision. The objective is to ma…
This paper presents an indoor visible light communication (VLC) system in conjunction with an imaging receiver with parallel data transmission (spatial multiplexing) to decrease the effects of inter-symbol interference (ISI). To distinguish between light units (transmitters) and to match the light units used to convey the data with the pixels of the imaging receiver, we propose the use of subcarrier multiplexing (SCM) tones. Each light unit transmission is multiplexed with a unique tone. At the receiver, a SCM tone decision system is utilized to measure the power level of each SCM tone and con…
This paper proposes an indoor visible light communication (VLC) system with multiple transmitters and receivers. Due to diffusivity of LED light beams, photodiode receive signals from many directions. We use one concave and one convex lens as optical antenna, and obtain the optimal lens structure by optimizing which corresponds to the minimum condition number of channel gain matrix. In this way the light emitted by different LED can be separated well from each other then minimize signal interference. However, interference increases in the case of system deviation, so we explore the system mobi…
Wireless power transfer (WPT) is a promising technology for powering up distributed devices in machine type networks. Over the last decade magnetic resonant coupling (MRC) received significant interest from the research community, since it is suitable for realizing mid-range WPT. In this paper, we investigate the performance of a single cell MRC-WPT network with multiple receivers, each equipped with an electromagnetic coil and a load. We first consider pre-adjusted loads for the receivers and by taking into account spatial randomness, we derive the harvesting outage probability of a receiver;…
Energy beamforming has emerged as a promising technique for enhancing the energy transfer efficiency of wireless power transfer (WPT). However, the performance of conventional energy beamforming may seriously degrade due to the non-linear radio frequency (RF) to direct current (DC) conversion at energy receivers (ERs). To tackle this issue, this letter proposes a new time-division energy beamforming, in which different energy beamforming matrices (of high ranks in general) are time shared to exploit the "convex-concave" shape of the RF-DC power relation at ERs. By considering a particular time…
