Vehicle pose estimation with LiDAR is essential in the perception technology of autonomous driving. However, due to incomplete observation measurements and sparsity of the LiDAR point cloud, it is challenging to achieve satisfactory pose extraction based on 3D LiDAR with the existing pose estimation methods. In addition, the demand for real-time performance further increases the difficulty of the pose estimation task. In this paper, we propose a novel vehicle pose estimation method based on the convex hull. The extracted 3D cluster is reduced to the convex hull, reducing the subsequent computation burden while preserving essential contour information. Subsequently, a novel criterion based on the minimum occlusion area is developed for the search-based algorithm, enabling accurate pose estimation. Additionally, this criterion renders the proposed algorithm particularly well-suited for obstacle avoidance. The proposed algorithm is validated on the KITTI dataset and a manually labeled dataset acquired at an industrial park. The results demonstrate that our proposed method can achieve better accuracy than the classical pose estimation method while maintaining real-time speed.
LiDAR sensors are becoming one of the most essential sensors in achieving full autonomy for self driving cars. LiDARs are able to produce rich, dense and precise spatial data, which can tremendously help in localizing and tracking a moving vehicle. In this paper, we review the latest finding in 3D LiDAR localization for autonomous driving cars, and analyse the results obtained by each method, in an effort to guide the research community towards the path that seems to be the most promising.
RS2AD-LiDAR: End-to-End Autonomous Driving LiDAR Data Generation from Roadside Sensor Observations
State Key Laboratory of Intelligent Green Vehicle and Mobility（智能绿色车辆与移动国家重点实验室）；School of Vehicle and Mobility（车辆与移动学院）；College of Artificial Intelligence（人工智能学院）；Logic & Silicon AI Studio；School of Instrumentation and Optoelectronic Engineering（仪器科学与光电工程学院）
Institut de Robòtica i Informàtica Industrial, CSIC-UPC（西班牙高等科学研究委员会-加泰罗尼亚理工大学工业机器人与信息研究所）
Perception technologies in Autonomous Driving are experiencing their golden age due to the advances in Deep Learning. Yet, most of these systems rely on the semantically rich information of RGB images. Deep Learning solutions applied to the data of other sensors typically mounted on autonomous cars (e.g. lidars or radars) are not explored much. In this paper we propose a novel solution to understand the dynamics of moving vehicles of the scene from only lidar information. The main challenge of this problem stems from the fact that we need to disambiguate the proprio-motion of the 'observer' ve…
The goal of this paper is to classify objects mapped by LiDAR sensor into different classes such as vehicles, pedestrians and bikers. Utilizing a LiDAR-based object detector and Neural Networks-based classifier, a novel real-time object detection is presented essentially with respect to aid self-driving vehicles in recognizing and classifying other objects encountered in the course of driving and proceed accordingly. We discuss our work using machine learning methods to tackle a common high-level problem found in machine learning applications for self-driving cars: the classification of pointc…
HPL-ViT: A Unified Perception Framework for Heterogeneous Parallel LiDARs in V2V
Institute of Automation, Chinese Academy of Science（中国科学院自动化研究所）；University of Chinese Academy of Sciences（中国科学院大学）；Waytous Inc.（Waytous公司）；University of Illinois, Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校）
New York University（纽约大学）；University of Chinese Academy of Sciences（中国科学院大学）；Alibaba Group（阿里巴巴集团）
LiDAR point clouds collected from a moving vehicle are functions of its trajectories, because the sensor motion needs to be compensated to avoid distortions. When autonomous vehicles are sending LiDAR point clouds to deep networks for perception and planning, could the motion compensation consequently become a wide-open backdoor in those networks, due to both the adversarial vulnerability of deep learning and GPS-based vehicle trajectory estimation that is susceptible to wireless spoofing? We demonstrate such possibilities for the first time: instead of directly attacking point cloud coordinat…
Robert Bosch GmbH（罗伯特·博世有限公司）；Ulm University（乌尔姆大学）
To assure that an autonomous car is driving safely on public roads, its object detection module should not only work correctly, but show its prediction confidence as well. Previous object detectors driven by deep learning do not explicitly model uncertainties in the neural network. We tackle with this problem by presenting practical methods to capture uncertainties in a 3D vehicle detector for Lidar point clouds. The proposed probabilistic detector represents reliable epistemic uncertainty and aleatoric uncertainty in classification and localization tasks. Experimental results show that the ep…
In this paper, we introduce a deep encoder-decoder network, named SalsaNet, for efficient semantic segmentation of 3D LiDAR point clouds. SalsaNet segments the road, i.e. drivable free-space, and vehicles in the scene by employing the Bird-Eye-View (BEV) image projection of the point cloud. To overcome the lack of annotated point cloud data, in particular for the road segments, we introduce an auto-labeling process which transfers automatically generated labels from the camera to LiDAR. We also explore the role of imagelike projection of LiDAR data in semantic segmentation by comparing BEV wit…
Uber Advanced Technologies Group（优步先进技术集团）；University of Toronto（多伦多大学）；Massachusetts Institute of Techonology（麻省理工学院）
We tackle the problem of producing realistic simulations of LiDAR point clouds, the sensor of preference for most self-driving vehicles. We argue that, by leveraging real data, we can simulate the complex world more realistically compared to employing virtual worlds built from CAD/procedural models. Towards this goal, we first build a large catalog of 3D static maps and 3D dynamic objects by driving around several cities with our self-driving fleet. We can then generate scenarios by selecting a scene from our catalog and "virtually" placing the self-driving vehicle (SDV) and a set of dynamic o…
Autonomous driving applications use two types of sensor systems to identify vehicles - depth sensing LiDAR and radiance sensing cameras. We compare the performance (average precision) of a ResNet for vehicle detection in complex, daytime, driving scenes when the input is a depth map (D = d(x,y)), a radiance image (L = r(x,y)), or both [D,L]. (1) When the spatial sampling resolution of the depth map and radiance image are equal to typical camera resolutions, a ResNet detects vehicles at higher average precision from depth than radiance. (2) As the spatial sampling of the depth map declines to t…
Institute for Intelligent Systems Research and Innovation (IISRI)（智能系统研究与创新研究所）；Deakin University（迪肯大学）
Point cloud data from 3D LiDAR sensors are one of the most crucial sensor modalities for versatile safety-critical applications such as self-driving vehicles. Since the annotations of point cloud data is an expensive and time-consuming process, therefore recently the utilisation of simulated environments and 3D LiDAR sensors for this task started to get some popularity. With simulated sensors and environments, the process for obtaining an annotated synthetic point cloud data became much easier. However, the generated synthetic point cloud data are still missing the artefacts usually exist in p…
FlowCalib: LiDAR-to-Vehicle Miscalibration Detection using Scene Flows
TUM School of Engineering and Design, Chair of Automotive Technology, Technical University of Munich（慕尼黑技术大学工程与设计学院，汽车技术教授职位）；TUM School of Computation, Information and Technology, Technical University of Munich（慕尼黑技术大学计算、信息与技术学院）
Daimler AG（戴姆勒股份公司）；Karlsruhe Institute of Technology (KIT)（卡尔斯鲁厄理工学院）；Institute for Information Processing Technology (ITIV)（信息处理技术研究所）
Lidar sensors are often used in mobile robots and autonomous vehicles to complement camera, radar and ultrasonic sensors for environment perception. Typically, perception algorithms are trained to only detect moving and static objects as well as ground estimation, but intentionally ignore weather effects to reduce false detections. In this work, we present an in-depth analysis of automotive lidar performance under harsh weather conditions, i.e. heavy rain and dense fog. An extensive data set has been recorded for various fog and rain conditions, which is the basis for the conducted in-depth an…
In this work, we present LIBRE: LiDAR Benchmarking and Reference, a first-of-its-kind dataset featuring 10 different LiDAR sensors, covering a range of manufacturers, models, and laser configurations. Data captured independently from each sensor includes three different environments and configurations: static targets, where objects were placed at known distances and measured from a fixed position within a controlled environment; adverse weather, where static obstacles were measured from a moving vehicle, captured in a weather chamber where LiDARs were exposed to different conditions (fog, rain…
RS2AD: End-to-End Autonomous Driving Data Generation from Roadside Sensor Observations
School of Vehicle and Mobility, Tsinghua University（清华大学车辆与移动系统学院）；State Key Laboratory of Intelligent Green Vehicle and Mobility, Tsinghua University（清华大学智能绿色车辆与移动系统国家重点实验室）；School of Instrumentation and Optoelectronic Engineering, BeiHang University（北航仪器与光电工程学院）；Department of Automation, Tsinghua University（清华大学自动化系）
In this work, we present a detailed comparison of ten different 3D LiDAR sensors, covering a range of manufacturers, models, and laser configurations, for the tasks of mapping and vehicle localization, using as common reference the Normal Distributions Transform (NDT) algorithm implemented in the self-driving open source platform Autoware. LiDAR data used in this study is a subset of our LiDAR Benchmarking and Reference (LIBRE) dataset, captured independently from each sensor, from a vehicle driven on public urban roads multiple times, at different times of the day. In this study, we analyze t…
As the autonomous driving industry is slowly maturing, visual map localization is quickly becoming the standard approach to localize cars as accurately as possible. Owing to the rich data returned by visual sensors such as cameras or LiDARs, researchers are able to build different types of maps with various levels of details, and use them to achieve high levels of vehicle localization accuracy and stability in urban environments. Contrary to the popular SLAM approaches, visual map localization relies on pre-built maps, and is focused solely on improving the localization accuracy by avoiding er…
DeepIPCv2: LiDAR-powered Robust Environmental Perception and Navigational Control for Autonomous Vehicle
Department of Computer Science and Electronics, Universitas Gadjah Mada（计算机科学与电子系，加查马达大学）；Department of Computer Science and Engineering, Toyohashi University of Technology（计算机科学与工程系，toyohashi技术大学）
Oxford Robotics Institute (ORI)（牛津机器人研究所）；University of Oxford（牛津大学）
Road boundaries, or curbs, provide autonomous vehicles with essential information when interpreting road scenes and generating behaviour plans. Although curbs convey important information, they are difficult to detect in complex urban environments (in particular in comparison to other elements of the road such as traffic signs and road markings). These difficulties arise from occlusions by other traffic participants as well as changing lighting and/or weather conditions. Moreover, road boundaries have various shapes, colours and structures while motion planning algorithms require accurate and …
LiDAR-based End-to-end Temporal Perception for Vehicle-Infrastructure Cooperation
University of Science and Technology Beijing（北京科技大学）；Institute for AI Industry Research (AIR), Tsinghua University（清华大学人工智能产业研究院）；The University of Hong Kong（香港大学）；Chengfang Financial Information Technology Services CO.LTD（诚方金融信息技术服务有限公司）
This work proposes a novel motion guided method for target-less self-calibration of a LiDAR and camera and use the re-projection of LiDAR points onto the image reference frame for real-time depth upsampling. The calibration parameters are estimated by optimizing an objective function that penalizes distances between 2D and re-projected 3D motion vectors obtained from time-synchronized image and point cloud sequences. For upsampling, a simple, yet effective and time efficient formulation that minimizes depth gradients subject to an equality constraint involving the LiDAR measurements is propose…
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；FZI Research Center for Information Technology（FZI信息技术研究中心）
In this paper, we present TEScalib, a novel extrinsic self-calibration approach of LiDAR and stereo camera using the geometric and photometric information of surrounding environments without any calibration targets for automated driving vehicles. Since LiDAR and stereo camera are widely used for sensor data fusion on automated driving vehicles, their extrinsic calibration is highly important. However, most of the LiDAR and stereo camera calibration approaches are mainly target-based and therefore time consuming. Even the newly developed targetless approaches in last years are either inaccurate…
We address the problem of estimating the pose and shape of vehicles from LiDAR scans, a common problem faced by the autonomous vehicle community. Recent work has tended to address pose and shape estimation separately in isolation, despite the inherent connection between the two. We investigate a method of jointly estimating shape and pose where a single encoding is learned from which shape and pose may be decoded in an efficient yet effective manner. We additionally introduce a novel joint pose and shape loss, and show that this joint training method produces better results than independently-…
Institut de Robòtica i Informàtica Industrial, CSIC-UPC（工业机器人与信息研究所（CSIC-UPC））
In this paper we propose a novel approach to estimate dense optical flow from sparse lidar data acquired on an autonomous vehicle. This is intended to be used as a drop-in replacement of any image-based optical flow system when images are not reliable due to e.g. adverse weather conditions or at night. In order to infer high resolution 2D flows from discrete range data we devise a three-block architecture of multiscale filters that combines multiple intermediate objectives, both in the lidar and image domain. To train this network we introduce a dataset with approximately 20K lidar samples of …
Karlsruhe Institute of Technology (KIT)（卡尔斯鲁厄理工学院）；FZI Research Center for Information Technology（FZI信息技术研究中心）
We present a generic evidential grid mapping pipeline designed for imaging sensors such as LiDARs and cameras. Our grid-based evidential model contains semantic estimates for cell occupancy and ground separately. We specify the estimation steps for input data represented by point sets, but mainly focus on input data represented by images such as disparity maps or LiDAR range images. Instead of relying on an external ground segmentation only, we deduce occupancy evidence by analyzing the surface orientation around measurements. We conduct experiments and evaluate the presented method using LiDA…
LiDAR sensors used in autonomous driving applications are negatively affected by adverse weather conditions. One common, but understudied effect, is the condensation of vehicle gas exhaust in cold weather. This everyday phenomenon can severely impact the quality of LiDAR measurements, resulting in a less accurate environment perception by creating artifacts like ghost object detections. In the literature, the semantic segmentation of adverse weather effects like rain and fog is achieved using learning-based approaches. However, such methods require large sets of labeled data, which can be extr…
V2I-Calib: A Novel Calibration Approach for Collaborative Vehicle and Infrastructure LiDAR Systems
China University of Mining and Technology -Beijing（中国矿业大学（北京））；Tsinghua University（清华大学）；Institute of Computing Technology, Chinese Academy of Sciences（中国科学院计算技术研究所）
Ford AV LLC（福特自动驾驶有限责任公司）；Ford Motor Company（福特汽车公司）
This paper presents a localization technique using aerial imagery maps and LIDAR based ground reflectivity for autonomous vehicles in urban environments. Traditional localization techniques using LIDAR reflectivity rely on high definition reflectivity maps generated from a mapping vehicle. The cost and effort required to maintain such prior maps are generally very high because it requires a fleet of expensive mapping vehicles. In this work we propose a localization technique where the vehicle localizes using aerial/satellite imagery, eradicating the need to develop and maintain complex high-de…
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；The University of Tokyo（东京大学）；Line Corporation（Line公司）
Estimating the pose of an unmanned aerial vehicle (UAV) or drone is a challenging task. It is useful for many applications such as navigation, surveillance, tracking objects on the ground, and 3D reconstruction. In this work, we present a LiDAR-camera-based relative pose estimation method between a drone and a ground vehicle, using a LiDAR sensor and a fisheye camera on the vehicle's roof and another fisheye camera mounted under the drone. The LiDAR sensor directly observes the drone and measures its position, and the two cameras estimate the relative orientation using indirect observation of …
This work aims to address the challenges in autonomous driving by focusing on the 3D perception of the environment using roadside LiDARs. We design a 3D object detection model that can detect traffic participants in roadside LiDARs in real-time. Our model uses an existing 3D detector as a baseline and improves its accuracy. To prove the effectiveness of our proposed modules, we train and evaluate the model on three different vehicle and infrastructure datasets. To show the domain adaptation ability of our detector, we train it on an infrastructure dataset from China and perform transfer learni…
Detecting surrounding vehicles by low-cost LIDAR has been drawing enormous attention. In low-cost LIDAR, vehicles present a multi-layer L-Shape. Based on our previous optimization/criteria-based L-Shape fitting algorithm, we here propose a data-driven and model-based method for robust vehicle segmentation and tracking. The new method uses T-linkage RANSAC to take a limited amount of noisy data and performs a robust segmentation for a moving car against noise. Compared with our previous method, T-Linkage RANSAC is more tolerant of observation uncertainties, i.e., the number of sides of the targ…
LiDAR sensors are used widely in Autonomous Vehicles for better perceiving the environment which enables safer driving decisions. Recent work has demonstrated serious LiDAR spoofing attacks with alarming consequences. In particular, model-level LiDAR spoofing attacks aim to inject fake depth measurements to elicit ghost objects that are erroneously detected by 3D Object Detectors, resulting in hazardous driving decisions. In this work, we explore the use of motion as a physical invariant of genuine objects for detecting such attacks. Based on this, we propose a general methodology, 3D Temporal…
Cooperative perception allows a Connected Autonomous Vehicle (CAV) to interact with the other CAVs in the vicinity to enhance perception of surrounding objects to increase safety and reliability. It can compensate for the limitations of the conventional vehicular perception such as blind spots, low resolution, and weather effects. An effective feature fusion model for the intermediate fusion methods of cooperative perception can improve feature selection and information aggregation to further enhance the perception accuracy. We propose adaptive feature fusion models with trainable feature sele…
University of Waterloo（滑铁卢大学）；University of Toronto（多伦多大学）
We introduce the Precise Synthetic Image and LiDAR (PreSIL) dataset for autonomous vehicle perception. Grand Theft Auto V (GTA V), a commercial video game, has a large detailed world with realistic graphics, which provides a diverse data collection environment. Existing works creating synthetic LiDAR data for autonomous driving with GTA V have not released their datasets, rely on an in-game raycasting function which represents people as cylinders, and can fail to capture vehicles past 30 metres. Our work creates a precise LiDAR simulator within GTA V which collides with detailed models for all…
Online multi-object tracking (MOT) is extremely important for high-level spatial reasoning and path planning for autonomous and highly-automated vehicles. In this paper, we present a modular framework for tracking multiple objects (vehicles), capable of accepting object proposals from different sensor modalities (vision and range) and a variable number of sensors, to produce continuous object tracks. This work is a generalization of the MDP framework for MOT, with some key extensions - First, we track objects across multiple cameras and across different sensor modalities. This is done by fusin…
In this paper, we present a multi-camera visual odometry (VO) system for an autonomous vehicle. Our system mainly consists of a virtual LiDAR and a pose tracker. We use a perspective transformation method to synthesize a surround-view image from undistorted fisheye camera images. With a semantic segmentation model, the free space can be extracted. The scans of the virtual LiDAR are generated by discretizing the contours of the free space. As for the pose tracker, we propose a visual odometry system fusing both the feature matching and the virtual LiDAR scan matching results. Only those feature…
Baidu Research – Institute for Deep Learning（百度研究院深度学习研究所）
Convolutional network techniques have recently achieved great success in vision based detection tasks. This paper introduces the recent development of our research on transplanting the fully convolutional network technique to the detection tasks on 3D range scan data. Specifically, the scenario is set as the vehicle detection task from the range data of Velodyne 64E lidar. We proposes to present the data in a 2D point map and use a single 2D end-to-end fully convolutional network to predict the objectness confidence and the bounding boxes simultaneously. By carefully design the bounding box en…
Sensor setups consisting of a combination of 3D range scanner lasers and stereo vision systems are becoming a popular choice for on-board perception systems in vehicles; however, the combined use of both sources of information implies a tedious calibration process. We present a method for extrinsic calibration of lidar-stereo camera pairs without user intervention. Our calibration approach is aimed to cope with the constraints commonly found in automotive setups, such as low-resolution and specific sensor poses. To demonstrate the performance of our method, we also introduce a novel approach f…
Rutgers, The State University of New Jersey（罗格斯大学，新泽西州立大学）
In this paper, we developed the solution of roadside LiDAR object detection using a combination of two unsupervised learning algorithms. The 3D point clouds are firstly converted into spherical coordinates and filled into the elevation-azimuth matrix using a hash function. After that, the raw LiDAR data were rearranged into new data structures to store the information of range, azimuth, and intensity. Then, the Dynamic Mode Decomposition method is applied to decompose the LiDAR data into low-rank backgrounds and sparse foregrounds based on intensity channel pattern recognition. The Coarse Fine…
