We report a decaying kink oscillation of a flux rope during a confined eruptive flare, observed off the solar limb by SDO/AIA, that lacked a detectable white-light coronal mass ejection. The erupting flux rope underwent kinking, rotation, and apparent leg-leg interaction during the event. The oscillations were observed simultaneously in multiple AIA channels at 304, 171, and 193 Å, indicating that multithermal plasma was entrained in the rope. After reaching the overlying loops in the active region, the flux rope exhibited large-amplitude, decaying kink oscillations with an apparent initial amplitude of 30 Mm, period of about 16 min, and decay time of about 17 min. We interpret these oscillations as a fundamental standing kink mode of the flux rope. The oscillation polarization has a clear vertical component, while the departure of the detected waveform from a sinusoidal signal suggests that the oscillation could be circularly or elliptically polarized. The estimated kink speed is 1080 km/s, corresponding to an Alfvén speed of about 760 km/s. This speed, together with the estimated electron density in the rope from our DEM analysis, $n_e \approx$(1.5--2.0)$\times 10^9$cm$^{-3}$, yields a magnetic field strength of about 15 G. To the best of our knowledge, decaying kink oscillations of a flux rope with non-horizontal polarization during a confined eruptive flare have not been reported before. These oscillations provide unique opportunities for indirect measurements of the magnetic-field strength in low-coronal flux ropes during failed eruptions.
Large-scale solar eruptions are believed to have a magnetic flux rope as the core structure. However, it remains elusive as to how the flux rope builds up and what triggers its eruption. Recent observations found that a prominence erupted following multiple episodes of "flux feeding". During each episode, a chromospheric fibril rose and merged with the prominence lying above. In this letter, we carried out 2.5-dimensional magnetohydrodynamic (MHD) numerical simulations to investigate whether the flux-feeding mechanism can explain such an eruption. The simulations demonstrate that the discrete …
Whether a solar eruption is successful or failed depends on the competition between different components of the Lorentz force exerting on the flux rope that drives the eruption. The present models only consider the strapping force generated by the background magnetic field perpendicular to the flux rope and the tension force generated by the field along the flux rope. Using the observed magnetic field on the photosphere as a time-matching bottom boundary, we perform a data-driven magnetohydrodynamic simulation for the 30 January 2015 confined eruption and successfully reproduce the observed so…
Coronal magnetic flux ropes are generally considered to be the core structure of large-scale solar eruptions. Recent observations found that solar eruptions could be initiated by a sequence of "flux feeding," during which chromospheric fibrils rise upward from below, and merge with a pre-existing prominence. Further theoretical study has confirmed that the flux feeding mechanism is efficient in causing the eruption of flux ropes that are wrapped by bald patch separatrix surfaces. But it is unclear how flux feeding influences coronal flux ropes that are wrapped by hyperbolic flux tubes (HFT), a…
Electron acceleration in the solar corona is often associated with flares and the eruption of twisted magnetic structures known as flux ropes. However, the locations and mechanisms of such particle acceleration during the flare and eruption are still subject to much investigation. Observing the exact sites of particle acceleration can help confirm how the flare and eruption are initiated and how they evolve. Here we use the Atmospheric Imaging Assembly to analyse a flare and erupting flux rope on 2014-April-18, while observations from the Nancay Radio Astronomy Facility allows us to diagnose t…
It is widely believed that magnetic flux ropes are the key structure of solar eruptions; however, their observable counterparts are not clear yet. We study a flare associated with flux rope eruption in a comprehensive radiative magnetohydrodynamic simulation of flare-productive active regions, especially focusing on the thermodynamic properties of the plasma involved in the eruption and their relation to the magnetic flux rope. The pre-existing flux rope, which carries cold and dense plasma, rises quasi-statically before the eruption onsets. During this stage, the flux rope does not show obvio…
Using three-dimensional magnetohydrodynamic (MHD) simulations, we investigate the eruption of coronal flux ropes underlying coronal streamers and the development of a prominence eruption. We initialize a quasi-steady solution of a coronal helmet streamer, into which we impose at the lower boundary the slow emergence of a part of a twisted magnetic torus. As a result a quasi-equilibrium flux rope is built up under the streamer. With varying sizes of the streamer and the different length and total twist of the emerged flux rope, we found different scenarios for the evolution from quasi-equilibri…
Coronal mass ejections (CMEs) are one of the primary manifestations of solar activity and can drive severe space weather effects. Therefore, it is vital to work towards being able to predict their occurrence. However, many aspects of CME formation and eruption remain unclear, including whether magnetic flux ropes are present before the onset of eruption and the key mechanisms that cause CMEs to occur. In this work, the pre-eruptive coronal configuration of an active region that produced an interplanetary CME with a clear magnetic flux rope structure at 1 AU is studied. A forward-S sigmoid appe…
Sympathetic eruptions on the Sun have been observed for several decades, but the mechanisms by which one eruption can trigger another one remain poorly understood. We present a 3D MHD simulation that suggests two possible magnetic trigger mechanisms for sympathetic eruptions. We consider a configuration that contains two coronal flux ropes located within a pseudo-streamer and one rope located next to it. A sequence of eruptions is initiated by triggering the eruption of the flux rope next to the streamer. The expansion of the rope leads to two consecutive reconnection events, each of which tri…
We investigate the onsets of three consecutive coronal mass ejection (CME) eruptions in 12 hours from a large bipolar active region (AR) observed by SDO, STEREO, RHESSI, and GOES. Evidently, the AR initially had a triple-decker configuration: three flux ropes in a vertical stack above the polarity inversion line (PIL). Upon being bumped by a confined eruption of the middle flux rope, the top flux rope erupts to make the first CME and its accompanying AR-spanning flare arcade rooted in a far-apart pair of flare ribbons. The second CME is made by eruption of the previously-arrested middle flux r…
We firstly report the simultaneous activities of a slipping motion of flare loops and a slipping eruption of a flux rope in 131 Å and 94 Å channels on 2014 February 02. The east hook-like flare ribbon propagated slippingly at a speed of about 50 km s$^{-1}$, which lasted about 40 min and extended by more than 100 Mm, but the west flare ribbon moved in the opposite direction with a speed of 30 km s$^{-1}$. At the later phase of the flare activity, a "bi-fan" system of flare loops was well developed. The east footpoints of the flux rope showed an apparent slipping motion along the hook of the ri…
The onset of a solar eruption is formulated here as either a magnetic catastrophe or as an instability. Both start with the same equation of force balance governing the underlying equilibria. Using a toroidal flux rope in an external bipolar or quadrupolar field as a model for the current-carrying flux, we demonstrate the occurrence of a fold catastrophe by loss of equilibrium for several representative evolutionary sequences in the stable domain of parameter space. We verify that this catastrophe and the torus instability occur at the same point; they are thus equivalent descriptions for the …
We study an evolving bipolar active region that exhibits flux cancellation at the internal polarity inversion line, the formation of a soft X-ray sigmoid along the inversion line and a coronal mass ejection. The evolution of the photospheric magnetic field is described and used to estimate how much flux is reconnected into the flux rope. About one third of the active region flux cancels at the internal polarity inversion line in the 2.5~days leading up to the eruption. In this period, the coronal structure evolves from a weakly to a highly sheared arcade and then to a sigmoid that crosses the …
In this letter, we present a spectacular eruptive flare (X8.2) associated with a coronal mass ejection (CME) on 2017 September 10 at the west limb of the Sun. A flux rope eruption is followed by the inflow, the formation of a current sheet and a cusp structure, which were simultaneously observed during the occurrence of this flare. The hierarchical layers of the cusp-shaped structure are well observed in 131 Å observation. The scenario that can be created from these observations is very consistent with the predictions of some eruptive models. Except for the characteristics mentioned above in t…
An isolated and fast decayed active region (NOAA 9729) was observed when passing through solar disk. There is only one CME related with it that give us a good opportunity to investigate the whole process of the CME. Filament in this active region rises up rapidly and then hesitates and disintegrates into flare loops. The rising filament from EIT images separates into two parts just before eruption. A new filament reforms several hours later after CME and the axis of this new one rotates clockwise about 22 degrees comparing with that of the former one. We also observed a bright transient J-shap…
Context. Some of the most dynamic active regions are associated with complex photospheric magnetic configurations such as quadrupolar regions, and especially ones with a $δ$-spot configuration and a strong Polarity Inversion Line (PIL). Aims. We study the formation and eruption of magnetic flux ropes in quadrupolar regions. Methods. 3D MHD simulations of the partial emergence of a highly twisted flux tube from the solar interior into a non-magnetized stratified atmosphere. Results. We emerge two $Ω$-shaped loops forming a quadrupolar region. The emerging flux forms two initially separated bipo…
Formation and Eruption of a Vortex-driven Magnetic Flux Rope in the Simulated Quiet Sun
School of Astronomy and Space Science, Nanjing University（南京大学天文与空间科学学院）；Key Laboratory of Modern Astronomy and Astrophysics (Nanjing University), Ministry of Education（南京大学现代天文与天体物理教育部重点实验室）
We present evidence that a magnetic flux rope was formed before a coronal mass ejection (CME) and its associated long-duration flare during a pair of preceding confined eruptions and associated impulsive flares in a compound event in NOAA Active Region 12371. Extreme-ultraviolet images and the extrapolated nonlinear force-free field show that the first two, impulsive flares, SOL2015-06-21T01:42, result from the confined eruption of highly sheared low-lying flux, presumably a seed flux rope. The eruption spawns a vertical current sheet, where magnetic reconnection creates flare ribbons and loop…
In this paper, we present multiwavelength observations of the triggering of a failed-eruptive M-class flare from the active region NOAA 11302, and investigate the possible reasons for the associated failed eruption. Photospheric observations and Non-Linear Force Free Field extrapolated coronal magnetic field revealed that the flaring region had a complex quadrupolar configuration with a pre-existing coronal null point situated above the core field. Prior to the onset of the M-class flare, we observed multiple periods of small-scale flux enhancements in GOES and RHESSI soft X-ray observations, …
We present an analysis of the 15 February 2011 X-class solar flare, previously reported to produce the first sunquake in solar cycle 24 (Kosovichev 2011). Using acoustic holography, we confirm the first, and report a second, weaker, seismic source associated with this flare. We find that the two sources are located at either end of a sigmoid which indicates the presence of a flux rope. Contrary to the majority of previously reported sunquakes, the acoustic emission precedes the peak of major hard X-ray (HXR) sources by several minutes. Furthermore, the strongest hard X-ray footpoints derived f…
Solar flares and coronal mass ejections (CMEs) are the most powerful explosions in the Sun. They are major sources of potentially destructive space weather conditions. However, the possible causes of their initiation remain controversial. By using high resolution data observed by NST of BBSO, supplemented by Solar Dynamics Observatory (SDO) observations, we present unusual observations of a small-scale emerging flux rope near a large sunspot, whose eruption produced an M-class flare and a coronal mass ejection. The presence of the small-scale flux rope was indicated by static nonlinear force f…
We investigate the formation times of eruptive magnetic flux ropes relative to the onset of solar eruptions, which is important for constraining models of coronal mass ejection (CME) initiation. We inspected uninterrupted sequences of 131 Å images that spanned more than eight hours and were obtained by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO) to identify the formation times of hot flux ropes that erupted in CMEs from locations close to the limb. The appearance of the flux ropes as well as their evolution toward eruptions were determined using morphol…
We investigate the formation, activation and eruption of a flux rope from the sigmoid active region NOAA 11719 by analyzing E(UV), X-ray and radio measurements. During the pre-eruption period of ~7 hours, the AIA 94 A images reveal the emergence of a coronal sigmoid through the interaction between two J-shaped bundles of loops which proceeds with multiple episodes of coronal loop brightenings and significant variations in the magnetic flux through the photosphere. These observations imply that repetitive magnetic reconnections likely play a key role in the formation of the sigmoidal flux rope …
Solar filament eruptions play a crucial role in triggering coronal mass ejections (CMEs). More than 80 % of eruptions lead to a CME. This correlation has been studied extensively during the past solar cycles and the last long solar minimum. The statistics made on events occurring during the rising phase of the new solar cycle 24 is in agreement with this finding. Both filaments and CMEs have been related to twisted magnetic fields. Therefore, nearly all the MHD CME models include a twisted flux tube, called a flux rope. Either the flux rope is present long before the eruption, or it is built u…
In this paper, we analyzed a failed and a successful eruption that initiated from the same polarity inversion line within NOAA AR 11387 on December 25, 2011. They both started from a reconnection between sheared arcades, having distinct pre-eruption conditions and eruption details: before the failed one, the magnetic fields of the core region had a weaker non-potentiality; the external fields had a similar critical height for torus instability, a similar local torus-stable region, but a larger magnetic flux ratio (of low corona and near-surface region) as compared to the successful one. During…
Coronal mass ejections (CMEs) are large-scale explosions of the coronal magnetic field. It is believed that magnetic reconnection significantly builds up the core structure of CMEs, a magnetic flux rope, during the eruption. However, the quantitative evolution of the flux rope, particularly its toroidal flux, is still unclear. In this paper, we study the evolution of the toroidal flux of the CME flux rope for four events. The toroidal flux is estimated as the magnetic flux in the footpoint region of the flux rope, which is identified by a method that simultaneously takes the coronal dimming an…
On SOL2017-09-06 solar active region 12673 produced an X9.3 flare which is regarded as largest to occur in solar cycle 24. In this work we have preformed a magnetohydrodynamic (MHD) simulation in order to reveal the three-dimensional (3D) dynamics of the magnetic fields associated with the X9.3 solar flare. We first performed an extrapolation of the 3D magnetic field based on the observed photospheric magnetic field prior to the flare and then used it as the initial condition for an MHD simulation. Consequently, the simulation showed a dramatic eruption. In particular, we found that a large co…
Understanding the magnetic configuration of the source regions of coronal mass ejections (CMEs) is vital in order to determine the trigger and driver of these events. Observations of four CME productive active regions are presented here, which indicate that the pre-eruption magnetic configuration is that of a magnetic flux rope. The flux ropes are formed in the solar atmosphere by the process known as flux cancellation and are stable for several hours before the eruption. The observations also indicate that the magnetic structure that erupts is not the entire flux rope as initially formed, rai…
Force-free equilibria containing two vertically arranged magnetic flux ropes of like chirality and current direction are considered as a model for split filaments/prominences and filament-sigmoid systems. Such equilibria are constructed analytically through an extension of the methods developed in Titov & Démoulin (1999) and numerically through an evolutionary sequence including shear flows, flux emergence, and flux cancellation in the photospheric boundary. It is demonstrated that the analytical equilibria are stable if an external toroidal (shear) field component exceeding a threshold value …
We use the TESIS EUV telescope to study the current sheet signatures observed during flux rope eruption. The special feature of the TESIS telescope was its ability to image the solar corona up to a distance of 2 $R_\odot$ from the Sun's center in the Fe 171 Å line. The Fe 171 Å line emission illuminates the magnetic field lines, and the TESIS images reveal the coronal magnetic structure at high altitudes. The analyzed CME had a core with a spiral-flux rope-structure. The spiral shape indicates that the flux rope radius varied along its length. The flux rope had a complex temperature structure:…
Compound eruptions represent that multiple closely spaced magnetic structures erupt consecutively within a short interval, and then lead to a single flare and a single CME. However, it is still subtle for the links between multiple eruptions and the associated single flare or/and single CME. In this Letter, we report the compound eruptions of twin close flux ropes (FR1 and FR2) within a few minutes that resulted in a flare with a single soft X-ray peak and a CME with two cores. The successive groups of expanding loops and double peaks of intensity flux in AIA cool wavelengths indicate two epis…
To investigate the factors that control the success and/or failure of solar eruptions, we study the magnetic field and 3-Dimensional (3D) configuration of 16 filament eruptions during 2010 July - 2013 February. All these events, i.e., erupted but failed to be ejected to become a coronal mass ejection (CME), are failed eruptions with the filament maximum height exceeding $100 Mm$. The magnetic field of filament source regions is approximated by a potential field extrapolation method. The filament 3D configuration is reconstructed from three vantage points by the observations of STEREO Ahead/Beh…
Magnetic flux rope is believed to be an important structural component of coronal mass ejections (CMEs). While there exist much observational evidence of the flux rope after the eruption, e.g., as seen in remote-sensing coronagraph images or in-situ solar wind data, the direct observation of flux ropes during CME impulsive phase has been rare. In this Letter, we present an unambiguous observation of a flux rope still in the formation phase in the low corona. The CME of interest occurred above the east limb on 2010 November 03 with footpoints partially blocked. The flux rope was seen as a brigh…
A magnetic flux rope (FR), hosting hot plasma, is thought to be central to the physics of coronal mass ejection. Such FRs are widely observed with passbands of the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO), that are sensitive to emission from the hot plasma around 10 MK. In contrast, observations of warmer (around 1 MK) counterparts of FRs are sparse. In this study, we report the failed eruption of a multi-thermal FR, hosting both hot and warm plasma. On 2015 May 1, a hot channel appeared in the AIA high temperature passbands out of the southeastern solar …
Failed filament eruptions are solar eruptions that are not associated with coronal mass ejections. In a failed filament eruption, the filament materials usually show some ascending and falling motions as well as generate bright EUV emissions. Here we report a failed filament eruption that occurred in a quiet-Sun region observed by the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory. In this event, the filament spreads out but gets confined by the surrounding magnetic field. When interacting with the ambient magnetic field, the filament material brightens up and flows along…
We study the magnetic field structures of hard X-ray sources and flare ribbons of the M1.1 flare in active region NOAA 10767 on 2005 May 27. We have found in a nonlinear force-free field extrapolation, over the same polarity inversion line, a small pre-eruptive magnetic flux rope located next to sheared magnetic arcades. Ramaty High Energy Solar Spectroscopic Imager (RHESSI) and Transition Region and Coronal Explorer (TRACE) observed this confined flare in the X-ray bands and ultraviolet (UV) 1600 Å\ bands, respectively. In this event magnetic reconnection occurred at several locations. It fir…
Coronal mass ejections (CMEs) are closely related to eruptive filaments and usually are the continuation of the same eruptive process into the upper corona. There are failed filament eruptions when a filament decelerates and stops at some greater height in the corona. Sometimes the filament after several hours starts to rise again and develops into the successful eruption with a CME formation. We propose a simple model for the interpretation of such two-step eruptions in terms of equilibrium of a flux rope in a two-scale ambient magnetic field. The eruption is caused by a slow decrease of the …
Interplanetary Coronal Mass Ejections (ICMEs) originate from the eruption of complex magnetic structures occurring in our star's atmosphere. Determining the general properties of ICMEs and the physical processes at the heart of their interactions with the solar wind is a hard task, in particular using only unidimensional in situ profiles. Thus, these phenomena are still not well understood. In this study we simulate the propagation of a set of flux ropes in order to understand some of the physical processes occurring during the propagation of an ICME such as their growth or their rotation. We …
Using a 3D MHD simulation, we model the quasi-static evolution and the onset of eruption of a coronal flux rope. The simulation begins with a twisted flux rope emerging at the lower boundary and pushing into a pre-existing coronal potential arcade field. At a chosen time the emergence is stopped with the lower boundary taken to be rigid. Then the coronal flux rope settles into a quasi-static rise phase during which an underlying, central sigmoid-shaped current layer forms along the so called hyperbolic flux tube (HFT), a generalization of the X-line configuration. Reconnections in the dissipat…
The combination of magnetohydrodynamic (MHD) simulation and multi-wavelength observations is an effective way to study mechanisms of magnetic flux rope eruption. We develop a data-driven MHD model using the zero-$β$ approximation. The initial condition is provided by nonlinear force-free field derived by the magneto-frictional method based on vector magnetic field observed by the Helioseismic and Magnetic Imager (HMI) aboard the Solar Dynamics Observatory (SDO). The bottom boundary uses observed time series of the vector magnetic field and the vector velocity derived by the Differential Affine…
We present observations of a failed eruption of a magnetic flux rope recorded during the M6.2 flare of 14 July 2004. The observations were mainly made with TRACE 171 Å and 1600 Å filters. The flare was accompanied by a destabilization of a magnetic structure observed as a filament eruption. After an initial acceleration the eruption slowed down and finally was stopped by the overlying coronal loops. The observations suggest that the whole event is well described by the quadrupole model of a solar flare. The failed eruption stretched the loops lying above and then they were observed oscillating…
Using high-resolution images from 1.6 m New Solar Telescope (NST) at Big Bear Solar Observatory (BBSO), we report the direct evidence of chromospheric reconnection at the polarity inversion line (PIL) between two small opposite polarity sunspots. Small jet-like structures (with velocities of ~20-55 km/s) were observed at the reconnection site before the onset of the first M1.0 flare. The slow rise of untwisting jets was followed by the onset of cool plasma inflow (~10 km/s) at the reconnection site, causing the onset of a two-ribbon flare. The reconnection between two sheared J-shaped cool H$α…
We report on three-dimensional (3D) Magnetohydrodynamic (MHD) simulations of recurrent eruptions in emerging flux regions. We find that reconnection of sheared fieldlines, along the polarity inversion line of an emerging bipolar region, leads to the formation of a new magnetic structure, which adopts the shape of a magnetic flux rope during its rising motion. Initially, the flux rope undergoes a slow-rise phase and, eventually, it experiences a fast-rise phase and ejective eruption towards the outer solar atmosphere. In total, four eruptions occur during the evolution of the system. For the fi…
We analyze 16 failed filament eruptions observed near 24 solar cycle maximum from May 2013 to July 2014. No significant rotation of filament spines is observed during the ascent in all studied failed eruptions, which does not support kink-instability mechanism of triggering the eruptions. We calculate potential magnetic field distributions in the corona above the initial locations of the filaments to study their height dependence. In seven events, the vertical profiles of the decay index $n$ are monotonic. The other nine events occur in the regions with the switchback or saddle-like n-profiles…
We present a multi-wavelength analysis of the eruption of a hot coronal channel associated with an X1.0 flare (SOL2013-10-28T02:03) from the active region NOAA 11875 by combining observations from AIA/SDO, HMI/SDO, RHESSI, and HiRAS. EUV images at high coronal temperatures indicated the presence of a hot channel at the core of the active region from the early pre-flare phase evidencing the pre-existence of a quasi-stable magnetic flux rope. The hot channel underwent an activation phase after a localized and prolonged pre-flare event occurring adjacent to one of its footpoints. Subsequently, th…
We address a primary question regarding the physical mechanism that triggers the energy release and initiates the onset of eruptions in the magnetar magnetosphere. A self-consistent stationary, axisymmetric model of the magnetar magnetosphere is constructed based on a force-free magnetic field configuration which contains a helically twisted force-free flux rope. Given the complex multipolar magnetic fields at the magnetar surface, we also develop a convenient numerical scheme to solve the GS equation. Depending on the surface magnetic field polarity, there exist two kinds of magnetic field co…
We present the analysis of an unusual failed eruption captured in high cadence and in many wavelengths during the observing campaign in support of the VAULT2.0 sounding rocket launch. The refurbished Very high Angular resolution Ultraviolet Telescope (VAULT2.0) is a Ly$α$ ($λ$ 1216 Å) spectroheliograph launched on September 30, 2014. The campaign targeted active region NOAA AR 12172 and was closely coordinated with the Hinode and IRIS missions and several ground-based observatories (NSO/IBIS, SOLIS, and BBSO). A filament eruption accompanied by a low level flaring event (at the GOES C-class le…
From a magnetohydrodynamic (MHD) simulation of the eruption of a prominence hosting coronal flux rope, we carry out forward synthesis of the circular polarization signal (Stokes V signal) of the FeXIII emission line at 1074.7 nm produced by the MHD model as measured by the proposed COronal Solar Magnetism Observatory (COSMO) Large Coronagraph (LC) and infer the line-of-sight magnetic field BLOS above the limb. With an aperture of 150 cm, integration time of 12 min, and a resolution of 12 arcsec, the LC can measure a significant BLOS with sufficient signal to noise level, from the simulated flu…
A model for strongly writhing confined solar eruptions suggests an origin in the helical kink instability of a coronal flux rope which remains stable against the torus instability. This model is tested against the well observed filament eruption on 2002 May 27 in a parametric MHD simulation study which comprises all phases of the event. Good agreement with the essential observed properties is obtained. These include the confinement, terminal height, writhing, distortion, and dissolution of the filament, and the flare loops. The agreement is robust against variations in a representative range o…
We apply the magneto-frictional approach to investigate which quantity or quantities can best predict the loss of equilibrium of a translationally-invariant magnetic flux rope. The flux rope is produced self-consistently by flux cancellation combined with gradual footpoint shearing of a coronal arcade which is open at the outer boundary. This models the magnetic field in decaying active regions on the Sun. Such a model permits two types of eruption: episodic small events caused by shearing and relaxation of the overlying arcade, and major eruptions of the main low-lying coronal flux rope. Thro…
This paper presents an improved MHD modeling of the confined filament eruption in solar active region NOAA~9957 on 2002 May~27 by extending the parametric studies of the event in Torok & Kliem 2005 and Hassanin & Kliem 2016. Here the initial flux rope equilibrium is chosen to possess a small apex height identical to the observed initial filament height, which implies a more realistic inclusion of the photospheric line tying. The model matches the observations as closely as in the preceding studies, with the closest agreement again being obtained for an initial average flux rope twist of about …
A number of solar filaments/prominences demonstrate failed eruptions, when a filament at first suddenly starts to ascend and then decelerates and stops at some greater height in the corona. The mechanism of the termination of eruptions is not clear yet. One of the confining forces able to stop the eruption is the gravity force. Using a simple model of a partial current-carrying torus loop anchored to the photosphere and photospheric magnetic field measurements as the boundary condition for the potential magnetic field extrapolation into the corona, we estimated masses of 15 eruptive filaments.…
