Co-evolution of point defects and Cr-rich nano-phase in binary Fe-20 at.% Cr alloy: A comprehensive investigation using positron annihilation spectroscopy and atom probe tomography
Sudip Kumar Sarkar, Priya Maheshwari, P. K. Pujari, Aniruddha Biswas
The role of point defects in temporal evolution of Cr-rich alpha-prime phase separation in binary Fe-20 at.% Cr alloy is elucidated by intercepting the long term (upto 1000 h at 773 K) aging at regular intervals and probing by a combination of atom probe tomography (APT) and positron annihilation spectroscopy (PAS). Since the Cr concentration of nano-scale α/ phase in Fe-20 at.% Cr alloy increases continually on aging, the point defects play active role throughout the aging duration. The near-atomic resolution of APT and self-seeking ability of positrons towards point defects make this analysis possible. The difference of positron affinities between Fe and Cr enables identification of the Cr-rich nano-phases that are specifically associated with defects; they would otherwise be indiscernible in the absence of defect. Thus, the temporal evolution of Cr-rich nano-phase along with the associated point defects can be fully characterized at each stage of aging using APT and PAS, respectively. The combined APT-PAS study shows that Cr-rich alpha-prime precipitation is preceded by vacancy-Cr complexes that act as nucleation sites for Cr clusters, which in turn, cause an early rise in micro-hardness due to cluster hardening. Interestingly, this is accompanied by a significant rise in point defect concentration. Our results depict that the vacancies present in the core of the alpha-prime precipitates migrate towards the precipitates interface during the course of aging and eventually get recovered resulting in virtually defect-free precipitates. This study chronicles the way the point defects shape the process of alpha-prime phase separation throughout the entire length of aging.
The defects, the behavior of 3d electrons and the hyperfine interactions in binary Fe-Al alloys with different Al contents have been studied by the measurements of positron lifetime spectra, coincidence Doppler broadening spectra of positron annihilation radiation and Mossbauer spectra. The results show that on increasing the Al content in Fe-Al alloys, the mean positron lifetime of the alloys increase, while the mean electron density of the alloys decrease. The increase of Al content in binary Fe-Al alloys will decrease the amount of unpaired 3d electrons; as a consequence the probability of …
We present the results of lifetime positron annihilation spectroscopy (PALS) for the alloys Fe21Ga and Fe22.4Ga, whose defect structure is connected with annealing from 20 to 1000C along the phase diagram of Fe21Ga and Fe22.4Ga, at the L12-A2 transitions and in the sub-lattice of the D03 phase. In frames of the standard trapping model, we estimate the positron annihilation parameters for the bulk metal and for the different thermal vacancies herein. Also we define concentrations of these vacancy defects, which may be helpful for explanation of the physical properties of Ge-Ga alloys, including…
The influence of initial heat treatment on anomalous Cr precipitation within high temperature solubility region in Fe-9Cr alloy has been investigated using positron lifetime studies. Air-quenched samples with pre-existing dislocations exhibited a distinct annealing stage in positron lifetime between 800 and 1100 K corresponding to Cr-precipitation. During this stage, Transmission Electron Microscopy showed fine precipitates of average size 4 nm, dispersed throughout the sample and from EDS analysis they are found to be Cr-enriched. The existence of dislocations is found to be responsible for C…
In many common Al-Mg-Si alloys (6000 series) intermediate storage at or near 'room temperature' after solutionising leads to pronounced changes of the precipitation kinetics during the ensuing artificial ageing step at \approx 180°C. This is not only an annoyance in production, but also a challenge for researchers. We studied the kinetics of natural 'room temperature' ageing (NA) in Al-Mg-Si alloys by means of various different techniques, namely electrical resistivity and hardness measurement, thermoanalysis and positron lifetime and Doppler broadening (DB) spectroscopy to identify the stages…
Electron-positron momentum distributions measured by the coincidence Doppler broadening method can be used in the chemical analysis of the annihilation environment, typically a vacancy-impurity complex in a solid. In the present work, we study possibilities for a quantitative analysis, i.e., for distinguishing the average numbers of different atomic species around the defect. First-principles electronic structure calculations self-consistently determining electron and positron densities and ion positions are performed for vacancy-solute complexes in Al-Cu, Al-Mg-Cu, and Al-Mg-Cu-Ag alloys. The…
The process of natural aging in pure ternary Al-Mg-Si alloys was studied by positron annihilation lifetime spectroscopy in real time in order to clarify the sequence and kinetics of clustering and precipitation. It was found that natural aging takes place in at least five stages in these alloys, four of which were directly observed. This is interpreted as the result of complex interactions between vacancies and solute atoms or clusters. One of the early stages of positron lifetime evolution coincides with a clustering process observed by differential scanning calorimetry (DSC) and involves the…
Shape memory Ti-Ni alloys attracted much attention in the recent years, since they are shape memory, intelligent as well as functional materials. In the present investigation Ti51Ni49 and Ti51Ni45Fe4 alloys were synthesized through radio frequency (RF) induction melting. The alloy was characterized through x-ray diffraction (XRD), scanning electron microscopy (SEM), Mossbauer spectroscopy (MS) and positron annihilation techniques (PAT).The Fe substitution stabilized the TiNi type cubic (a=2.998 A) phase. The surface microstructure and presence of the oxide layer in Ti51Ni45Fe4 alloy have been …
The present work reports the effect of Ta on densification and microstructure evolution during non-isothermal and spark plasma sintering of nanocrystalline W. Nanocrystalline W-5wt.%Ta alloy powder was synthesized using mechanical alloying. The nanocrystalline powder was characterized thoroughly using X-ray diffraction line profile analysis. Furthermore, the shrinkage behavior of nanocrystalline powder was investigated during non-isothermal sintering using dilatometry. Subsequently, the alloy powder was consolidated using spark plasma sintering up to 1600 °C. The role of Ta on stabilizing the …
In the present work, we demonstrate for the first time the outstanding dynamic mechanical properties of nano-quasicrystalline Al93Fe3Cr2Ti2 at.% alloy and composites. Unlike most crystalline aluminium-based alloys, this alloy and composites exhibit substantial strain rate sensitivity and retain much of their ductility at high rates of strain. This opens new pathways for use in safety-critical materials where impact resistance is required.
Practical applications of nanocrystalline metallic thin films are often limited by instabilities. In addition to grain growth, the thin film itself can become unstable and collapse into islands through solid-state dewetting. Selective alloying can improve nanocrystalline stability, but the impact of this approach on dewetting is not clear. In this study, two alloys that exhibit nanocrystalline thermal stability as ball milled powders are evaluated as thin films. While both alloys demonstrated dewetting behavior following annealing, the severity decreased in more dilute compositions. Ultimately…
Building on the recent discovery of tough nanocrystalline Cu-Zr alloys with amorphous intergranular films, this paper investigates ternary nanocrystalline Cu-Zr-Hf alloys with a focus on understanding how alloy composition affects the formation of disordered complexions. Binary Cu-Zr and Cu-Hf alloys with similar initial grain sizes were also fabricated for comparison. The thermal stability of the nanocrystalline alloys was evaluated by annealing at 950 °C (>95% of the solidus temperatures), followed by detailed characterization of the grain boundary structure. All of the ternary alloys exhibi…
We report the synthesis of a bulk nanostructured alloy using the laser-powder bed fusion process. The equiatomic AlCoCrFeMnNi chemically complex alloy forms a nanoscale modulated structure, which is homogeneously distributed in the as-built condition. The nanostructure consisted of Al & Ni-rich ordered (B2) and Cr & Fe-rich disordered (A2) BCC phases. The two phases form an interconnected phase-network with coherent interface boundaries. Atom-probe-tomography and aberration-corrected scanning transmission electron microscopy analysis of the spatial distribution of the modulated structure sugge…
A complex study of aging kinetics for both coarse-grained and nanostructured by severe plastic deformation Cu -- 2 wt% Be alloy is reported. It is shown that aging of a coarse-grained alloy leads to continuous formation of nanosized CuBe body centred cubic (bcc, CsCl -- type) semi-coherent particles with the {220} Cu // {200} CuBe crystallographic orientation relationship. These particles created significant internal stress fields and became obstacles for dislocation glide that resulted in a change in the hardness from 95 Vickers hardness (HV) for the solubilized alloy to 400 HV for the aged o…
Precious metal alloys enables new possibilities to tailor materials for specific optical functions. Here we present a systematic study of the effects of a nanoscale alloying on the permittivity of Au-Ag-Cu metals at 38 different atomic mixing ratios. The permittivity was measured and analyzed numerically by applying the Drude model. X-ray diffraction (XRD) revealed the face centered cubic lattice of the alloys. Both, optical spectra and XRD results point towards an equivalent composition-dependent electron scattering behavior. Correlation between the fundamental structural parameters of alloys…
We present a study of the elongation and rupture of gold-silver alloy nanowires. Atomistic details of the evolution were derived from time-resolved atomic resolution transmission electron microscopy and molecular dynamics simulations. The results show the occurrence of gold enrichment at the nanojunction region, leading to a gold-like structural behavior even for alloys with minor gold content. Our observations have also revealed the formation of mixed (Au and Ag) linear atomic chains.
The aging of a nanocrystalline equiatomic ZnSe alloy produced by mechanical alloying was investigated using X-ray diffraction (XRD) and differential scanning calorimetry (DSC) techniques. The measured XRD patterns showed that Se atoms located at interfacial component migrated with aging giving raise to a crystalline selenium (c-Se) phase. DSC spectra of heat-treated samples at temperatures above 221oC followed by quenching showed that the c-Se particles changed to the amorphous state. It was also observed that the as-milled and aged samples are highly hydrophilic. The lattice parameters and th…
The thermal stability of nanocrystalline (nc) Al has been studied by means of positron lifetime spectroscopy and X-ray diffraction (XRD), prepared by compacting nanoparticles under high pressures. Those nanoparticles were produced by the flow-levitation (FL) method [1] and the arc-discharge (DC) method. Effect of oxide at nanoparticle surface on structure stability was investigated especially in this experiment. The positron lifetime results reveal that vacancy clusters in grain boundaries are dominant positron traps according to the high relative intensity of the positron lifetime τ2 in both …
The bulk quaternary equiatomic CoCrFeNi alloy is studied extensively in literature. Under experimental conditions, it shows a single-phase fcc structure and its physical and mechanical properties are similar to those of the quinary equiatomic CoCrFeMnNi alloy. Many studies in literature have focused on the mechanical properties of bulk nanocrystalline high entropy alloys or compositionally complex alloys, and their microstructure evolution upon annealing. The thin film processing route offers an excellent alternative to form nanocrystalline alloys. Due to the high nucleation rate and high dens…
In this study, we report on face-centered cubic structured CoCrFeNi high-entropy alloy thin films with finely dispersed nano-oxide particles which are formed by internal oxidation. Analytical scanning transmission electron microscopy imaging found that the particles are Cr2O3. The oxide particles contribute to the hardening of the film increasing its hardness by 14% compared to that of the film without precipitates, through the Orowan-type strengthening mechanism. Our novel approach paves the way to design medium- and high-entropy alloys with high strength by making use of oxide phases.
This work reports the formation of nano- crystalline Al50Cu28Fe22 by high-energy milling. For obtaining the nano-crystalline material, the Al50Cu28Fe22 alloy synthesized through slow cooling of the molten alloy was subjected to ball milling, which was carried out in attritor mill at 400 rpm for 5 h, 10 h, 20 h, 40 h and 80 h with a ball to powder ratio 40 : 1 in hexane medium. The x-ray diffraction observation of ball-milled samples revealed that the milling duration of $5h$ to $40 hrs$ has led to the formation of nano-phase. The average crystallite size comprising the nano-phase has been foun…
A brief review is given of recent positron studies of metal and semiconductor nanocrystals. The prospects offered by positron annihilation as a sensitive method to access nanocrystal (NC) properties are described and compared with other experimental methods. The tunability of the electronic structure of nanocrystals underlies their great potential for application in many areas. Owing to their large surface-to-volume ratio, the surfaces and interfaces of NCs play a crucial role in determining their properties. Here we focus on positron 2D angular correlation of annihilation radiation (2D-ACAR) …
In this paper we report phonon dynamics in chemically synthesized Zn1- xMgxO (0\leqx\leq0.07) and Zn1-yCdyO (0\leqy\leq0.03) alloy nanostructures of sizes ~10 nm using non-resonant Raman and Fourier Transformed Infrared Spectroscopy (FTIR). Substitution by Mg makes the unit cell compact while Cd substitution leads to unit cell expansion. On alloying, both A1(LO) and E1(LO) mode of wurtzite ZnO show blue shift for Zn1-xMgxO and red shift for Zn1-yCdyO alloy nanostructures due to mass defect and volume change induced by the impurity atoms. Significant shift has been observed in E1(LO) mode for Z…
Titanium-based shape memory alloys, such as Ti2448, have attracted enormous attention owing to their unique thermomechanical properties and potential biomedical applications. In this study, we develop a polycrystalline phase field to investigate the grain size dependence of the martensitic transformation and associated mechanical properties of nanograined Ti-Nb alloys. It is shown that a reduction of the average grain size strengthens the suppression of the martensitic transformation (MT), leading to an increase of the transformation stress, shrinkage of the stress hysteresis, and elimination …
Quantifying the population of nanoscale defects that are formed in metals and alloys exposed to extreme radiation environments remains a pressing challenge in materials science. These defects both fundamentally alter material properties and seed long-timescale performance degradation, which often limits the lifespan of engineering systems. Unlike ceramic and semiconducting materials, these defects in metals and alloys are not spectroscopically active, forcing characterization to rely on indirect measurements from which the distribution of nanoscale defects may be inferred. In this mini-review,…
Employing the Ginzburg-Landau phase-field theory, a new coupled dynamic thermo-mechanical 3D model has been proposed for modeling the cubic-to-tetragonal martensitic transformations in shape memory alloy (SMA) nanostructures. The stress-induced phase transformations and thermo-mechanical behavior of nanostructured SMAs have been investigated. The mechanical and thermal hysteresis phenomena, local non-uniform phase transformations and corresponding non-uniform temperature and deformations distributions are captured successfully using the developed model. The predicted microstructure evolution q…
Mechanical alloying (MA) has been used to fabricate the Co2FeAl Heusler alloy with a nanocrystalline structure. The formation mechanism of the alloy has been investigated. Rietveld analysis showed that all samples that were milled for more than 15 hours had an L21 structure with a space group of Fm3m. The crystallite size and internal strain of the samples were calculated using the Williamson-Hall equation. With mechanical alloying of up to 20 hours the crystallite size of Co2FeAl increased, after which the crystallite size started to decrease. In contrast, internal strain first decreased duri…
The decomposition process mechanisms have been investigated in a Fe50Au25Pd25 (at.%) alloy processed by severe plastic deformation. Phases were characterized by X-ray diffraction and microstructures were observed using transmission electron microscopy. In the coarse grain alloy homogenized and aged at $450 ^{circ}\mathrm{C}$, the bcc α-Fe and fcc AuPd phases nucleate in the fcc supersaturated solid solution and grow by a discontinuous precipitation process resulting in a typical lamellar structure. The grain size of the homogenized FeAuPd alloy was reduced in a range of 50 to 100nm by high pre…
The present work reports the role of different atomic mobility induced localized pore evolution on densification during spark plasma sintering of nanocrystalline W-Mo alloy powder. The shrinkage (or expansion) behavior of cold compacted milled powders was studied using dilatometry during non-isothermal sintering up to 1600 °C. Subsequently, the milled powders were densified to ~95% relative density using spark plasma sintering up to 1600 °C. The enhanced localized Joule heating due to dynamically evolved porous structure could be attributed for the densification during spark plasma sintering.
Amorphous complexions in nanocrystalline metals have the potential to improve mechanical properties and radiation tolerance, as well as resistance to grain growth. In this study, the stability of amorphous complexions in binary and ternary Cu-based alloys is investigated by observing the effect of cooling rate from high temperature on the occurrence of amorphous-to-ordered complexion transitions. Bulk Cu-Zr and Cu-Zr-Hf alloy samples were annealed to induce boundary premelting and then quenched through a procedure that induces a gradient of local cooling rate through the sample height. Amorpho…
Positron lifetime spectroscopy (PAL), Doppler broadening (DB) as well as coincidence Doppler broadening (CDB) spectroscopy of a new variety of Folic acid (FA) capped zinc oxide nano-particle samples has been performed at room temperature. The results show interesting patterns of observation, hither-to unobserved in ZnO wurtzite crystalline samples, such as predominance of positronium formation, as reflected in the (PAL) analysis, phase transition in the nano crystalline samples at ~0.8-1.0 % FA concentration as depicted from DB results. Also, the chemical environment of the samples has been an…
The present article describes the size induced changes in the structural arrangement of intrinsic defects present in chemically synthesized ZnO nanoparticles of various sizes. Routine X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM) have been performed to determine the shapes and sizes of the nanocrystalline ZnO samples. Detailed studies using positron annihilation spectroscopy reveals the presence of zinc vacancy. Whereas analysis of photoluminescence results predict the signature of charged oxygen vacancies. The size induced changes in positron parameters as well as the pho…
The processing of binary alloys consisting of ferromagnetic Fe and antiferromagnetic Cr by severe plastic deformation (SPD) with different chemical compositions has been investigated. Although the phase diagram exhibits a large gap in the thermodynamical equilibrium at lower temperatures, it is shown that techniques based on SPD help to overcome common processing limits. Different processing routes including initial ball milling (BM) and arc melting (AM) and a concatenation with annealing treatments prior to high-pressure torsion (HPT) deformation are compared in this work. Investigation of th…
Hybrid Monte Carlo (MC)/molecular dynamics (MD) simulations are conducted to study the microstructures of nanocrystalline (nc) Cu/Ag alloys with various Ag concentrations. When the Ag concentration is below 50 Ag atoms/nm!, an increase in Ag concentration leads to a gradual growth of monolayer grain boundary (GB) complexions into nanolayer complexions. Above the concentration of 50 Ag atoms/nm!, wetting layers with a bulk crystalline phase are observed. The effects of Ag on mechanical properties and deformation mechanisms of nc Cu/Ag alloys are investigated in MD simulations of uniaxial tensio…
One of the challenges in fusion reactors is the discovery of plasma facing materials capable of withstanding extreme conditions, such as radiation damage and high heat flux. Development of fusion materials can be a daunting task since vast combinations of microstructures and compositions need to be explored, each of which requires trial-and-error based irradiation experiments and materials characterizations. Here, we utilize combinatorial experiments that allow rapid and systematic characterizations of composition-microstructure dependent irradiation damage behaviors of nanostructured tungsten…
Stress-induced martensitic transformations enable metastable alloys to exhibit enhanced strain hardening capacity, leading to improved formability and toughness. As is well-known from transformation-induced plasticity (TRIP) steels, however, the resulting martensite can limit ductility and fatigue life due to its intrinsic brittleness. In this work, we explore an alloy design strategy that utilizes stress-induced martensitic transformations but does not retain the martensite phase. This strategy is based on the introduction of superelastic nano-precipitates, which exhibit reverse transformatio…
Developing a single-phase and nanograined refractory high-entropy alloy ZrHfNbTaW with ultrahigh hardness by phase transformation via high-pressure torsion
In the present investigation the pure elemental powder mixture of Al (70 at%) Ni (15 at %), Cu (15 at %) was mechanically milled in an attritor ball mill for 10, 20, 40, 60, 80 and 100 hours in hexane medium at 400 rpm. The isothermal annealing of 100 h mechanically milled powder has been done at 700 0C for 20, 40 and 60 hours. The mechanically alloyed powders are characterized using X-ray diffraction, differential thermal analysis and transmission electron microscopy techniques. It was observed that mechanical alloying led to the formation of nano tau 3 phases in Al70 Cu15Ni15 after 80 h of m…
The effect of temperature controlled annealing on the confined valence electron states in CdSe nanocrystal arrays, deposited as thin films, was studied using two-dimensional angular correlation of annihilation radiation (2D-ACAR). A reduction in the intensity by ~35% was observed in a feature of the positron annihilation spectrum upon removal of the pyridine capping molecules above 200 degrees Celsius in a vacuum. This reduction is explained by an increased electronic interaction of the valence orbitals of neighboring nanocrystals, induced by the formation of inorganic interfaces. Partial evap…
Monophasic and homogeneous Ni10Zr7 nanocrystalline alloy films were successfully grown at room temperature by co-sputtering in an indigenously developed three-gun DC/RF magnetron sputtering unit. The films could be produced with long-range crystallographic and chemical order in the alloy, thus overcoming the widely acknowledged inherent proclivity of the glass forming Ni-Zr couple towards amorphization. Crystallinity of these alloys is a desirable feature with regard to improved efficacy in applications such as hydrogen storage, catalytic activity and nuclear reactor engineering, to name a few…
The thermal decomposition behavior, the microstructural evolution and its influence on the mechanical properties of a supersaturated Cu Co solid solution with ~100 nm average grain size prepared by severe plastic deformation is investigated under non-isothermal and isothermal annealing conditions. Pure fine grained Cu and Co exhibit substantial grain growth upon annealing, whereas the Cu Co alloy is thermally stable at the same annealing temperatures. The annealed microstructures are studied by independent characterization methods, including scanning electron microscopy, electron energy loss s…
Stabilization of Martensite and Austenite Phases and Realization of Two-way Martensitic Transition in Co-Ni-Ga Ferromagnetic Shape Memory Alloy Nanoparticles
In this study, a preparation route of Co-Cu alloys with soft magnetic properties by high-pressure torsion deformation is introduced. Nanocrystalline, supersaturated single-phase microstructures are obtained after deformation of Co-Cu alloys, which are prepared from an initial powder mixture with Co-contents above 70 wt.%. Isochronal annealing treatments up to 400°C further reveal a remarkable microstructural stability. Only at 600°C, the supersaturated phase decomposes into two fcc-phases. The coercivity, measured by SQUID as a function of annealing temperature, remains significantly below the…
After irradiation of Fe-Cr alloys of low purity (model alloys of F-M steels), minor solute elements as P, Ni and Si have been shown to create solute clusters which significantly contribute to hardening and might be associated with small dislocation loops. In order to understand the role of each impurity on the formation of the nano-features formed under irradiation and the eventual synergies between the different species, Fe-15at.%Cr-X (X=Si, Ni, P, NiSiP) alloys of different composition have been ion irradiated and characterized using atom probe tomography. Irradiation were performed at 300 {…
We explored the magnetic behavior of a common two-phase nanomagnetic system by Monte Carlo computer simulation of a modified Heisenberg model on a 3D complex lattice with single- and cluster-spins. The effect of exchange coupling between two component magnetic phases was studied on the enhancement in Curie temperature (ECT) of the intergranular amorphous region of a common duplex-phase alloy system, with numerous nano-crystallites embedded in amorphous matrix. The dependences of ECT were investigated systematically upon the nanocrystallite size, the volume fraction and the interspace among cry…
We have calculated surface energies and surface magnetic order of various low-indexed surfaces of monoatomic Fe, Co, and Pt, and binary, ordered FePt, CoPt, and MnPt using density functional theory. Our results for the binary systems indicate that elemental, Pt-covered surfaces are preferred over Fe- and Co-covered and mixed surfaces of the same orientation. The lowest energy orientation for mixed surfaces is the highly coordinated (111) surface. We find Pt-covered (111) surfaces, which can be realized in the L11 structure only, to be lower in energy by about 400 meV/atom compared to the mixed…
Atom probe tomography (APT), electron probe microanalysis (EPMA) and nanoindentation were used to characterise the oxygen-rich layer on an in-service jet engine compressor disc, manufactured from the titanium alloy TIMETAL 834. Oxygen ingress was quantified and related to changes in mechanical properties through nanoindentation studies. The relationship between oxygen concentration, microstructure, crystal orientation and hardness has been explored through correlative hardness mapping, EPMA and electron backscatter diffraction (EBSD). The role of microstructure on oxygen ingress has been studi…
For simultaneously achieving the high-power factor and low lattice thermal conductivity of Si-Ge based thermoelectric materials, we employed, in this study, constructively modifying the electronic structure near the chemical potential and nano-structuring by low temperature and high-pressure sintering on nano-crystalline powders. Nickel was doped to create the impurity states near the edge of the valence band for enhancing the power factor with boron for tuning the carrier concentration. The nanostructured samples with the nominal composition of Si0.65-xGe0.32Ni0.03Bx (x = 0.01, 0.02, 0.03, an…
Research over the years has shown that the formation of the Fe$_3$Si phase in FINEMET (Fe-Si-Nb-B-Cu) alloys leads to superior soft magnetic properties. In this work, we use a CALPHAD approach to derive Fe-Si phase diagrams to identify the composition-temperature domain where the Fe$_3$Si phase can be stabilized. Thereafter, we have developed a precipitation model capable of simulating the nucleation and growth of Fe$_3$Si nanocrystals via Langer-Schwartz theory. For optimum magnetic properties, prior work suggests that it is desirable to precipitate Fe$_3$Si nanocrystals with 10-15 nm diamete…
The controlled design of martensitic transformation (MT) to achieve specific properties is crucial for the innovative application of shape memory alloys (SMAs) in advanced technologies. Herein, we explore and design the MT behaviors and the mechanical properties of Ti-Nb nanocomposites by combining high-throughput phase-field simulations and machine learning (ML) approaches. Based on the systematic phase-field simulations, we obtain data sets of the mechanical properties for various nanocomposites constructed by four macroscopic degrees of freedom, which can be employed to design and optimize …
Dynamic Kinetic Evaluation Favors Compositionally Diverse Multicomponent Alloy Nanoparticles for Hydrogen Evolution
The University of Tokyo（东京大学）；National Institute for Materials Science（物质材料研究机构）；National Institute of Advanced Industrial Science and Technology（产业技术综合研究所）
