Unmanned aerial vehicles (UAVs) have gained wide research interests due to their technological advancement and high mobility. The UAVs are equipped with increasingly advanced capabilities to run computationally intensive applications enabled by machine learning techniques. However, because of both energy and computation constraints, the UAVs face issues hovering in the sky while performing computation due to weather uncertainty. To overcome the computation constraints, the UAVs can partially or fully offload their computation tasks to the edge servers. In ordinary computation offloading operations, the UAVs can retrieve the result from the returned output. Nevertheless, if the UAVs are unable to retrieve the entire result from the edge servers, i.e., straggling edge servers, this operation will fail. In this paper, we propose a coded distributed computing approach for computation offloading to mitigate straggling edge servers. The UAVs can retrieve the returned result when the number of returned copies is greater than or equal to the recovery threshold. There is a shortfall if the returned copies are less than the recovery threshold. To minimize the cost of the network, energy consumption by the UAVs, and prevent over and under subscription of the resources, we devise a two-phase Stochastic Coded Offloading Scheme (SCOS). In the first phase, the appropriate UAVs are allocated to the charging stations amid weather uncertainty. In the second phase, we use the $z$-stage Stochastic Integer Programming (SIP) to optimize the number of computation subtasks offloaded and computed locally, while taking into account the computation shortfall and demand uncertainty. By using a real dataset, the simulation results show that our proposed scheme is fully dynamic, and minimizes the cost of the network and UAV energy consumption amid stochastic uncertainties.
Consider a multi-cell mobile edge computing network, in which each user wishes to compute the product of a user-generated data matrix with a network-stored matrix. This is done through task offloading by means of input uploading, distributed computing at edge nodes (ENs), and output downloading. Task offloading may suffer long delay since servers at some ENs may be straggling due to random computation time, and wireless channels may experience severe fading and interference. This paper aims to investigate the interplay among upload, computation, and download latencies during the offloading pro…
This paper studies a new mobile edge computing (MEC) setup where an unmanned aerial vehicle (UAV) is served by cellular ground base stations (GBSs) for computation offloading. The UAV flies between a give pair of initial and final locations, during which it needs to accomplish certain computation tasks by offloading them to some selected GBSs along its trajectory for parallel execution. Under this setup, we aim to minimize the UAV's mission completion time by optimizing its trajectory jointly with the computation offloading scheduling, subject to the maximum speed constraint of the UAV, and th…
Benefiting from the fusion of communication and intelligent technologies, network-enabled robots have become important to support future machine-assisted and unmanned applications. To provide high-quality services for robots in wide areas, hybrid satellite-terrestrial networks are a key technology. Through hybrid networks, computation-intensive and latency-sensitive tasks can be offloaded to mobile edge computing (MEC) servers. However, due to the mobility of mobile robots and unreliable wireless network environments, excessive local computations and frequent service migrations may significant…
Considering the user mobility and unpredictable mobile edge computing (MEC) environments, this paper studies the intelligent task offloading problem in unmanned aerial vehicle (UAV)-enabled MEC with the assistance of digital twin (DT). We aim at minimizing the energy consumption of the entire MEC system by jointly optimizing mobile terminal users (MTUs) association, UAV trajectory, transmission power distribution and computation capacity allocation while respecting the constraints of mission maximum processing delays. Specifically, double deep Q-network (DDQN) algorithm stemming from deep rein…
Limited computing resources of internet-of-things (IoT) nodes incur prohibitive latency in processing input data. This triggers new research opportunities toward task offloading systems where edge servers handle intensive computations of IoT devices. Deploying the computing servers at existing base stations may not be sufficient to support IoT nodes operating in a harsh environment. This requests mobile edge servers to be mounted on unmanned aerial vehicles (UAVs) that provide on-demand mobile edge computing (MEC) services. Time-varying offloading demands and mobility of UAVs need a joint desi…
Purdue University（普渡大学）；Iowa State University（爱荷华州立大学）
Federated learning (FL) is a popular technique for training a global model on data distributed across client devices. Like other distributed training techniques, FL is susceptible to straggler (slower or failed) clients. Recent work has proposed to address this through device-to-device (D2D) offloading, which introduces privacy concerns. In this paper, we propose a novel straggler-optimal approach for coded matrix computations which can significantly reduce the communication delay and privacy issues introduced from D2D data transmissions in FL. Moreover, our proposed approach leads to a consid…
Edge computing is emerging as a new paradigm to allow processing data near the edge of the network, where the data is typically generated and collected. This enables critical computations at the edge in applications such as Internet of Things (IoT), in which an increasing number of devices (sensors, cameras, health monitoring devices, etc.) collect data that needs to be processed through computationally intensive algorithms with stringent reliability, security and latency constraints. Our key tool is the theory of coded computation, which advocates mixing data in computationally intensive task…
Cooperative computation is a promising approach for localized data processing at the edge, e.g. for Internet of Things (IoT). Cooperative computation advocates that computationally intensive tasks in a device could be divided into sub-tasks, and offloaded to other devices or servers in close proximity. However, exploiting the potential of cooperative computation is challenging mainly due to the heterogeneous and time-varying nature of edge devices. Coded computation, which advocates mixing data in sub-tasks by employing erasure codes and offloading these sub-tasks to other devices for computat…
With the emergence of diverse mobile applications (such as augmented reality), the quality of experience of mobile users is greatly limited by their computation capacity and finite battery lifetime. Mobile edge computing (MEC) and wireless power transfer are promising to address this issue. However, these two techniques are susceptible to propagation delay and loss. Motivated by the chance of short-distance line-of-sight achieved by leveraging unmanned aerial vehicle (UAV) communications, an UAV-enabled wireless powered MEC system is studied. A power minimization problem is formulated subject …
With the rapid development of connecting massive devices to the Internet, especially for remote areas without cellular network infrastructures, space-air-ground integrated networks (SAGINs) emerge and offload computation-intensive tasks. In this paper, we consider a SAGIN, where multiple low-earth-orbit (LEO) satellites providing connections to the cloud server, an unmanned aerial vehicle (UAV), and nearby base stations (BSs) providing edge computing services are included. The UAV flies along a fixed trajectory to collect tasks generated by Internet of Things (IoT) devices, and forwards these …
Edge computing is emerging as a new paradigm to allow processing data at the edge of the network, where data is typically generated and collected, by exploiting multiple devices at the edge collectively. However, exploiting the potential of edge computing is challenging mainly due to the heterogeneous and time-varying nature of edge devices. Coded computation, which advocates mixing data in sub-tasks by employing erasure codes and offloading these sub-tasks to other devices for computation, is recently gaining interest, thanks to its higher reliability, smaller delay, and lower communication c…
Joint Offloading and Resource Allocation for Hybrid Cloud and Edge Computing in SAGINs: A Decision Assisted Hybrid Action Space Deep Reinforcement Learning Approach
This paper investigates the robust and secure task transmission and computation scheme in multi-antenna unmanned aerial vehicle (UAV)-assisted mobile edge computing (MEC) networks, where the UAV is dual-function, i.e., aerial MEC and aerial relay. The channel uncertainty is considered during information offloading and downloading. An energy consumption minimization problem is formulated under some constraints including users' quality of service and information security requirements and the UAV's trajectory's causality, by jointly optimizing the CPU frequency, the offloading time, the beamformi…
Recently, as a consequence of the COVID-19 pandemic, dependence on telecommunication for remote working and telemedicine has significantly increased. In cellular networks, incorporation of Unmanned Aerial Vehicles (UAVs) can result in enhanced connectivity for outdoor users due to the high probability of establishing Line of Sight (LoS) links. The UAV's limited battery life and its signal attenuation in indoor areas, however, make it inefficient to manage users' requests in indoor environments. Referred to as the Cluster centric and Coded UAV-aided Femtocaching (CCUF) framework, the network's …
Mobile cloud computing relieves the tension between compute-intensive mobile applications and battery-constrained mobile devices by enabling the offloading of computing tasks from mobiles to a remote processors. This paper considers a mobile cloud computing scenario in which the "cloudlet" processor that provides offloading opportunities to mobile devices is mounted on unmanned aerial vehicles (UAVs) to enhance coverage. Focusing on a slotted communication system with frequency division multiplexing between mobile and UAV, the joint optimization of the number of input bits transmitted in the u…
Mobile edge computing (MEC) and wireless power transfer (WPT) are two promising techniques to enhance the computation capability and to prolong the operational time of low-power wireless devices that are ubiquitous in Internet of Things. However, the computation performance and the harvested energy are significantly impacted by the severe propagation loss. In order to address this issue, an unmanned aerial vehicle (UAV)-enabled MEC wireless powered system is studied in this paper. The computation rate maximization problems in a UAV-enabled MEC wireless powered system are investigated under bot…
Unmanned Aerial Vehicles (UAVs) have been recently considered as means to provide enhanced coverage or relaying services to mobile users (MUs) in wireless systems with limited or no infrastructure. In this paper, a UAV-based mobile cloud computing system is studied in which a moving UAV is endowed with computing capabilities to offer computation offloading opportunities to MUs with limited local processing capabilities. The system aims at minimizing the total mobile energy consumption while satisfying quality of service requirements of the offloaded mobile application. Offloading is enabled by…
Mobile edge computing (MEC) provides computational services at the edge of networks by offloading tasks from user equipments (UEs). This letter employs an unmanned aerial vehicle (UAV) as the edge computing server to execute offloaded tasks from the ground UEs. We jointly optimize user association, UAV trajectory, and uploading power of each UE to maximize sum bits offloaded from all UEs to the UAV, subject to energy constraint of the UAV and quality of service (QoS) of each UE. To address the non-convex optimization problem, we first decompose it into three subproblems that are solved with in…
In this paper, a cellular-connected unmanned aerial vehicles (UAV) mobile edge computing system is studied in which the multiple UAVs are served by terrestrial base station (TBS) for computation task offloading. Our goal is to minimize the total UAVs energy consumption, including propulsion energy, computation energy and communication energy, while ensuring that the total number of bits of UAVs are completely computed. For tackling the large amount of bits for computation, we propose a resource partitioning strategy where one portion of tasks is migrated to TBS for computation and the other po…
Heavy data load and wide cover range have always been crucial problems for online data processing in internet of things (IoT). Recently, mobile-edge computing (MEC) and unmanned aerial vehicle base stations (UAV-BSs) have emerged as promising techniques in IoT. In this paper, we propose a three-layer online data processing network based on MEC technique. On the bottom layer, raw data are generated by widely distributed sensors, which reflects local information. Upon them, unmanned aerial vehicle base stations (UAV-BSs) are deployed as moving MEC servers, which collect data and conduct initial …
Airborne base stations (carried by drones) have a great potential to enhance coverage and capacity of cellular networks. Multiple scenarios and use cases will highly benefit from such technology such as (i) offloading terrestrial base stations (BSs) in dense and urban areas, and (ii) providing coverage for rural areas. However, one of the main challenges facing the deployment of airborne BSs is the limited available energy at the drone, which limits the flight time. In fact, most of the currently used unmanned aerial vehicles (UAVs) can only operate for one hour maximum. This limits the perfor…
