Accurate and efficient estimation of the high dimensional channels is one of the critical challenges for practical applications of massive multiple-input multiple-output (MIMO). In the context of hybrid analog-digital (HAD) transceivers, channel estimation becomes even more complicated due to information loss caused by limited radio-frequency chains. The conventional compressive sensing (CS) algorithms usually suffer from unsatisfactory performance and high computational complexity. In this paper, we propose a novel deep learning (DL) based framework for uplink channel estimation in HAD massive MIMO systems. To better exploit the sparsity structure of channels in the angular domain, a novel angular space segmentation method is proposed, where the entire angular space is segmented into many small regions and a dedicated neural network is trained offline for each region. During online testing, the most suitable network is selected based on the information from the global positioning system. Inside each neural network, the region-specific measurement matrix and channel estimator are jointly optimized, which not only improves the signal measurement efficiency, but also enhances the channel estimation capability. Simulation results show that the proposed approach significantly outperforms the state-of-the-art CS algorithms in terms of estimation performance and computational complexity.
Unmanned aerial vehicles (UAVs) are foreseen to constitute promising airborne communication devices as a benefit of their superior channel quality. But UAV-to-ground (U2G) communications are vulnerable to eavesdropping. Hence, we conceive a sophisticated physical layer security solution for improving the secrecy rate of multi-antenna aided U2G systems. Explicitly, the secrecy rate of the U2G MIMO wiretap channels is derived by using random matrix theory. The resultant explicit expression is then applied in the joint optimization of the MIMO transceiver and the UAV location relying on an altern…
Hybrid transceiver can strike a balance between complexity and performance of multiple-input multiple-output (MIMO) systems. In this paper, we develop a unified framework on hybrid MIMO transceiver design using matrix-monotonic optimization. The proposed framework addresses general hybrid transceiver design, rather than just limiting to certain high frequency bands, such as millimeter wave (mmWave) or terahertz bands or relying on the sparsity of some specific wireless channels. In the proposed framework, analog and digital parts of a transceiver, either linear or nonlinear, are jointly optimi…
Mean-squared-error (MSE) is one of the most widely used performance metrics for the designs and analysis of multi-input-multiple-output (MIMO) communications. Weighted MSE minimization, a more general formulation of MSE minimization, plays an important role in MIMO transceiver optimization. While this topic has a long history and has been extensively studied, existing treatments on the methods in solving the weighted MSE optimization are more or less sporadic and non-systematic. In this paper, we firstly review the two major methodologies, Lagrange multiplier method and majorization theory bas…
In this paper, optimal linear transceiver designs for multi-hop amplify-and-forward (AF) Multiple-input Multiple-out (MIMO) relaying systems with Gaussian distributed channel estimation errors are investigated. Some commonly used transceiver design criteria are unified into a single matrix-variate optimization problem. With novel applications of majorization theory and properties of matrix-variate function, the optimal structure of robust transceiver is first derived. Based on the optimal structure, the original transceiver design problems are reduced to much simpler problems with only scalar …
The capacity of ideal MIMO channels has a high-SNR slope that equals the minimum of the number of transmit and receive antennas. This letter analyzes if this result holds when there are distortions from physical transceiver impairments. We prove analytically that such physical MIMO channels have a finite upper capacity limit, for any channel distribution and SNR. The high-SNR slope thus collapses to zero. This appears discouraging, but we prove the encouraging result that the relative capacity gain of employing MIMO is at least as large as with ideal transceivers.
In this paper, a unified linear minimum mean-square-error (LMMSE) transceiver design framework is investigated, which is suitable for a wide range of wireless systems. The unified design is based on an elegant and powerful mathematical programming technology termed as quadratic matrix programming (QMP). Based on QMP it can be observed that for different wireless systems, there are certain common characteristics which can be exploited to design LMMSE transceivers e.g., the quadratic forms. It is also discovered that evolving from a point-to-point MIMO system to various advanced wireless systems…
This paper investigates the diversity order of the minimum mean squared error (MMSE) based optimal transceivers in multiple-input multiple-output (MIMO) amplify-and-forward (AF) relaying systems. While the diversity-multiplexing tradeoff (DMT) analysis accurately predicts the behavior of the MMSE receiver for the positive multiplexing gain, it turned out that the performance is very unpredictable via DMT for the case of fixed rates, because MMSE strategies exhibit a complicated rate dependent behavior. In this paper, we establish the diversity-rate tradeoff performance of MIMO AF relaying syst…
In this paper, we propose a wideband Full Duplex (FD) Multiple-Input Multiple-Output (MIMO) communication system comprising of an FD MIMO node simultaneously communicating with two multi-antenna UpLink (UL) and DownLink (DL) nodes utilizing the same time and frequency resources. To suppress the strong Self-Interference (SI) signal due to simultaneous transmission and reception in FD MIMO systems, we propose a joint design of Analog and Digital (A/D) cancellation as well as transmit and receive beamforming capitalizing on baseband Orthogonal Frequency-Division Multiplexing (OFDM) signal modelin…
Even if massive multiple-input multiple-output (MIMO) can theoretically bring huge benefits, it incurs substantial hardware complexity and expensive hardware costs. To address these issues while maintaining the system performance simultaneously, we develop an asymmetrical transceiver architecture for massive MIMO systems in this paper by releasing the shackles on radio frequency (RF) chains. Specifically, we first develop the architecture for the asymmetrical transceiver where the number of receive RF chains is different from that of the transmit RF chains. Due to this unequal number of RF cha…
Interference alignment (IA) has recently emerged as a promising interference mitigation technique for interference networks. In this letter, we focus on the IA non-iterative transceiver design problem in a multiple-input-multiple-output interfering broadcast channel (MIMO-IBC), and observed that there is previously unexploited flexibility in different permutations of user ordering. By choosing a good user ordering for a pre-determined IA inter-channel-interference allocation, an improved transceiver design can be accomplished. In order to achieve a more practical performance-complexity tradeof…
Hybrid analog-digital (A/D) transceivers designed for millimeter wave (mmWave) systems have received substantial research attention, as a benefit of their lower cost and modest energy consumption compared to their fully-digital counterparts. We further improve their performance by conceiving a Tomlinson-Harashima precoding (THP) based nonlinear joint design for the downlink of multiuser multiple-input multiple-output (MIMO) mmWave systems. Our optimization criterion is that of minimizing the mean square error (MSE) of the system under channel uncertainties subject both to realistic transmit po…
Linear transceiving schemes between the relay and the destination have recently attracted much interest in MIMO amplify-and-forward (AF) relaying systems due to low implementation complexity. In this paper, we provide comprehensive analysis on the diversity order of the linear zero-forcing (ZF) and minimum mean squared error (MMSE) transceivers. Firstly, we obtain a compact closed-form expression for the diversity-multiplexing tradeoff (DMT) through tight upper and lower bounds. While our DMT analysis accurately predicts the performance of the ZF transceivers, it is observed that the MMSE tran…
In this letter, we develop a low-complexity transceiver design, referred to as semi-random beam pairing (SRBP), for sparse multipath massive MIMO channels. By exploring a sparse representation of the MIMO channel in the virtual angular domain, we generate a set of transmit-receive beam pairs in a semi-random way to support the simultaneous transmission of multiple data streams. These data streams can be easily separated at the receiver via a successive interference cancelation (SIC) technique, and the power allocation among them are optimized based on the classical waterfilling principle. The …
A major limitation of heterogeneous cellular networks (HCNs) is the neglect of the additive residual transceiver hardware impairments (ARTHIs). The assumption of perfect hardware is quite strong and results in misleading conclusions. This paper models a general multiple-input multiple-output (MIMO) HCN with cell association by incorporating the RTHIs. We derive the coverage probability and shed light on the impact of the ARTHIs, when various transmission methods are applied. As the hardware quality decreases, the coverage probability worsens. Especially, this effect is more severe as the trans…
In this paper, we propose a robust transceiver design for the K-pair quasi-static MIMO interference channel. Each transmitter is equipped with M antennas, each receiver is equipped with N antennas, and the k-th transmitter sends L_k independent data streams to the desired receiver. In the literature, there exist a variety of theoretically promising transceiver designs for the interference channel such as interference alignment-based schemes, which have feasibility and practical limitations. In order to address practical system issues and requirements, we consider a transceiver design that enfo…
The UFMC modulation is among the most considered solutions for the realization of beyond-OFDM air interfaces for future wireless networks. This paper focuses on the design and analysis of an UFMC transceiver equipped with multiple antennas and operating at millimeter wave carrier frequencies. The paper provides the full mathematical model of a MIMO-UFMC transceiver, taking into account the presence of hybrid analog/digital beamformers at both ends of the communication links. Then, several detection structures are proposed, both for the case of single-packet isolated transmission, and for the c…
In this paper, we investigate the robust transceiver design for dual-hop amplify-and-forward (AF) MIMO relay systems with Gaussian distributed channel estimation errors. Aiming at maximizing the mutual information under imperfect channel state information (CSI), source precoder at source and forwarding matrix at the relay are jointly optimized. Using some elegant attributes of matrix-monotone functions, the structures of the optimal solutions are derived first. Then based on the derived structure an iterative waterfilling solution is proposed. Several existing algorithms are shown to be specia…
In this letter, we investigate an important and famous issue, namely weighted mean-square-error (MSE) minimization transceiver designs. In our work, for transceiver designs a novel weighted MSE model is proposed, which is defined as a linear matrix function with respect to the traditional data detection MSE matrix. The new model can be interpreted an extension of weighting operation from vector field to matrix field. Based on the proposed weighting operation a general transceiver design is proposed, which aims at minimizing an increasing matrix-monotone function of the output of the previous l…
Radio-frequency (RF) impairments in the transceiver hardware of communication systems (e.g., phase noise (PN), high power amplifier (HPA) nonlinearities, or in-phase/quadrature-phase (I/Q) imbalance) can severely degrade the performance of traditional multiple-input multiple-output (MIMO) systems. Although calibration algorithms can partially compensate these impairments, the remaining distortion still has substantial impact. Despite this, most prior works have not analyzed this type of distortion. In this paper, we investigate the impact of residual transceiver hardware impairments on the MIM…
We consider the problem of linear transceiver design to achieve max-min fairness in a downlink MIMO multicell network. This problem can be formulated as maximizing the minimum rate among all the users in an interfering broadcast channel (IBC). In this paper we show that when the number of antennas is at least two at each of the transmitters and the receivers, the min rate maximization problem is NP-hard in the number of users. Moreover, we develop a low-complexity algorithm for this problem by iteratively solving a sequence of convex subproblems, and establish its global convergence to a stati…
Hybrid analog/digital precoding is a promising technology to cut down hardware cost in massive multi-input multi-output (MIMO) systems at millimeter wave frequencies. In this letter, we propose a joint beam selection scheme for analog domain precoding under discrete lens array. By considering channel correlation among users, the proposed scheme is able to avoid inter-user interference and maximize system sum rate. Moreover, a bio-inspired ant colony optimization-based algorithm is proposed to obtain a near-optimal solution with dramatically reduced computational complexity. Finally, simulation…
This paper investigates Cell-Free massive MIMO networks, where each access point (AP) is equipped with a hybrid transceiver, reducing the complexity and cost compared to a fully digital transceiver. Asymptotic approximations for the spectral efficiency are derived for uplink and downlink. Capitalizing on these expressions, a max-min problem is formulated to optimize the (i) analog beamformer at the APs and (ii) pilot assignment. Simulations show that the optimization of these variables substantially increases the network performance.
In this paper, robust transceiver design with Tomlinson-Harashima precoding (THP) for multi-hop amplify-and-forward (AF) multiple-input multiple-output (MIMO) relaying systems is investigated. At source node, THP is adopted to mitigate the spatial intersymbol interference. However, due to its nonlinear nature, THP is very sensitive to channel estimation errors. In order to reduce the effects of channel estimation errors, a joint Bayesian robust design of THP at source, linear forwarding matrices at relays and linear equalizer at destination is proposed. With novel applications of elegant chara…
In this paper, linear transceiver design for multi-hop amplify-and-forward (AF) multiple-input multiple-out (MIMO) relaying systems with Gaussian distributed channel estimation errors is investigated. Commonly used transceiver design criteria including weighted mean-square-error (MSE) minimization, capacity maximization, worst-MSE/MAX-MSE minimization and weighted sum-rate maximization, are considered and unified into a single matrix-variate optimization problem. A general robust design algorithm is proposed to solve the unified problem. Specifically, by exploiting majorization theory and prop…
Transceiver hardware impairments (e.g., phase noise, in-phase/quadrature-phase (I/Q) imbalance, amplifier non-linearities, and quantization errors) have obvious degradation effects on the performance of wireless communications. While prior works have improved our knowledge on the influence of hardware impairments of single-user multiple-input multiple-output (MIMO) systems over Rayleigh fading channels, an analysis encompassing the Rician fading channel is not yet available. In this paper, we pursue a detailed analysis of regular and large-scale (LS) MIMO systems over Rician fading channels by…
Massive MIMO and non-orthogonal multiple access (NOMA) are crucial methods for future wireless systems as they provide many advantages over conventional systems. Power-domain NOMA methods are investigated in massive MIMO systems, whereas there is little work on integration of code-domain NOMA and massive MIMO which is the subject of this study. We propose a general framework employing user-grouping based hybrid beamforming architecture for mm-wave massive MIMO systems where NOMA is considered as an intra-group process. It is shown that classical receivers of sparse code multiple access (SCMA) …
With the capability of reconfiguring the wireless electromagnetic environment, intelligent reflecting surface (IRS) is a new paradigm for designing future wireless communication systems. In this paper, we consider optical IRS for improving the performance of visible light communication (VLC) under a multiple-input and multiple-output (MIMO) setting. Specifically, we focus on the downlink communication of an indoor MIMO VLC system and aim to minimize the mean square error (MSE) of demodulated signals at the receiver. To this end, the MIMO channel gain of the IRS-aided VLC is first derived under…
In this paper, linear transceiver design for dual-hop non-regenerative (amplify-and-forward (AF)) MIMO-OFDM systems under channel estimation errors is investigated. Second order moments of channel estimation errors in the two hops are first deduced. Then based on the Bayesian framework, joint design of linear forwarding matrix at the relay and equalizer at the destination under channel estimation errors is proposed to minimize the total mean-square-error (MSE) of the output signal at the destination. The optimal designs for both correlated and uncorrelated channel estimation errors are conside…
We study the maximum sum rate optimization problem in the multiple-input multiple-output interfering broadcast channel. The multiple-antenna transmitters and receivers are assumed to have perfect channel state information. In this setting, finding the optimal linear transceiver design is an NP-hard problem. We show that a reformulation of the problem renders the application of generalized Benders decomposition suitable. The decomposition provides us with an optimization structure which we exploit to apply two different optimization approaches. While one approach is guaranteed to converge to a …
Despite the deleterious effect of hardware impairments on communication systems, most prior works have not investigated their impact on widely used relay systems. Most importantly, the application of inexpensive transceivers, being prone to hardware impairments, is the most cost-efficient way for the implementation of massive multiple-input multiple-output (MIMO) systems. Consequently, the direction of this paper is towards the investigation of the impact of hardware impairments on MIMO relay networks with large number of antennas. Specifically, we obtain the general expression for the ergodic…
In this paper, we firstly exploit the inter-user interference (IUI) and inter-cell interference (ICI) as useful references to develop a robust transceiver design based on interference alignment for a downlink multi-user multi-cell multiple-input multiple-output (MIMO) interference network under channel estimation error. At transmitters, we propose a two-tier transmit beamforming strategy, we first achieve the inner beamforming direction and allocated power by minimizing the interference leakage as well as maximizing the system energy efficiency, respectively. Then, for the outer beamformer des…
Robust transceiver design against unresolvable system uncertainties is of crucial importance for reliable communication. For instance, full-duplex communication suffers from such uncertainties when canceling the self-interference, since the residual self-interference (RSI) remains uncanceled due to imperfect channel knowledge. We consider a MIMO multi-hop system, where the source, the relay and the destination are equipped with multiple antennas. We allow multi-stream beamforming granted by MIMO technique, without restricting the transmissions to single streaming. The relay can operate in eith…
In this paper, an optimization framework is proposed for joint transceiver beamforming and admission control in massive MIMO cognitive radio networks. The objective of the optimization problem is to support maximum number of secondary users in downlink transmission with constraints on the total power allocated to users, the rate achieved at secondary users and the interference at the primary nodes. The proposed framework takes into account the imperfect knowledge of the channels between the secondary and the primary nodes and also mitigates the interference caused by the primary users at secon…
We consider a single user (SU) massive MIMO system with multiple antennas at the transmitter (base station) and a single antenna at the user terminal (UT). Taking transceiver power consumption into consideration, for a given spectral efficiency (SE) we maximize the energy efficiency (EE) as a function of the number of base station (BS) antennas $M$, resulting in a closed-form expression for the optimal SE-EE trade-off. It is observed that in contrast to the classical SE-EE trade-off (which considers only the radiated power), with transceiver power consumption taken into account, the EE increas…
This paper studies the massive MIMO full-duplex relaying (MM-FDR), where multiple source-destination pairs communicate simultaneously with the help of a common full-duplex relay equipped with very large antenna arrays. Different from the traditional MM-FDR protocol, a general model where sources/destinations are allowed to equip with multiple antennas is considered. In contrast to the conventional MIMO system, massive MIMO must be built with low-cost components which are prone to hardware impairments. In this paper, the effect of hardware impairments is taken into consideration, and is modeled…
In this paper we propose and analyze a novel self-interference cancellation structure for in-band MIMO full-duplex transceivers. The proposed structure utilizes reference receiver chains to obtain reference signals for digital self-interference cancellation, which means that all the transmitter-induced nonidealities will be included in the digital cancellation signal. To the best of our knowledge, this type of a structure has not been discussed before in the context of full-duplex transceivers. First, we will analyze the overall achievable performance of the proposed cancellation scheme, while…
In this paper we address the linear precoding and decoding design problem for a bidirectional orthogonal frequencydivision multiplexing (OFDM) communication system, between two multiple-input multiple-output (MIMO) full-duplex (FD) nodes. The effects of hardware distortion as well as the channel state information error are taken into account. In the first step, we transform the available time-domain characterization of the hardware distortions for FD MIMO transceivers to the frequency domain, via a linear Fourier transformation. As a result, the explicit impact of hardware inaccuracies on the …
We consider the impact of transceiver power consumption on the energy efficiency (EE) of the Zero Forcing (ZF) detector in the uplink of massive MIMO systems, where a base station (BS) with $M$ antennas communicates coherently with $K$ single antenna user terminals (UTs). We consider the problem of maximizing the EE with respect to (M,K) for a fixed sum spectral efficiency. Through analysis we study the impact of system parameters on the optimal EE. System parameters consists of the average channel gain to the users and the power consumption parameters (PCPs) (e.g., power consumed by each RF a…
In this paper, we propose a joint transceiver design for single-carrier frequency-domain equalization (SC-FDE) based multiple-input multiple-output (MIMO) relay systems. To this end, we first derive the optimal minimum mean-squared error linear and decision-feedback frequency-domain equalization filters at the destination along with the corresponding error covariance matrices at the output of the equalizer. Subsequently, we formulate the source and relay precoding matrix design problem as the minimization of a family of Schur-convex and Schur-concave functions of the mean-squared errors at the…
This paper addresses the modeling and digital cancellation of self-interference in in-band full-duplex (FD) transceivers with multiple transmit and receive antennas. The self-interference modeling and the proposed nonlinear spatio-temporal digital canceller structure takes into account, by design, the effects of I/Q modulator imbalances and power amplifier (PA) nonlinearities with memory, in addition to the multipath self-interference propagation channels and the analog RF cancellation stage. The proposed solution is the first cancellation technique in the literature which can handle such a se…
Large intelligent surface (LIS) has recently emerged as a potential low-cost solution to reshape the wireless propagation environment for improving the spectral efficiency. In this paper, we consider a downlink millimeter-wave (mmWave) multiple-input-multiple-output (MIMO) system, where an LIS is deployed to assist the downlink data transmission from a base station (BS) to a user equipment (UE). Both the BS and the UE are equipped with a large number of antennas, and a hybrid analog/digital precoding/combining structure is used to reduce the hardware cost and energy consumption. We aim to maxi…
This letter is concerned with transmit and receive filter optimization for the K-user MIMO interference channel. Specifically, linear transmit and receive filter sets are designed which maximize the weighted sum rate while allowing each transmitter to utilize only the local channel state information. Our approach is based on extending the existing method of minimizing the weighted mean squared error (MSE) for the MIMO broadcast channel to the K-user interference channel at hand. For the case of the individual transmitter power constraint, however, a straightforward generalization of the existi…
We address receiver (RX) signal processing in MIMO systems under in-phase/quadrature (I/Q) imbalance, which causes cross-talk of mirror-subcarriers in OFDM systems. We extend the typically reported single-user studies to uplink OFDMA-based multiuser MIMO, with simultaneous user multiplexing in frequency and spatial domains. We also incorporate multiple external interferers, for modeling challenging conditions in heterogeneous networks. In the signal processing developments, we exploit the augmented subcarrier processing, which processes each subcarrier jointly with its counterpart at the image…
Robust transceiver design against unresolvable system uncertainties is of crucial importance for reliable communication. For instance, full-duplex communication suffers from such uncertainties when canceling the self-interference, since some residual self-interference (RSI) remains uncanceled due to imperfect channel knowledge. We consider a MIMO multi-hop system, where the source, the relay and the destination are equipped with multiple antennas. The considered decode-and-forward (DF) hybrid relay can operate in either half-duplex or full-duplex mode, and the mode changes adaptively depending…
We consider the uplink of a multiuser massive MIMO system wherein a base station (BS) having $M$ antennas communicates coherently with $K$ single antenna user terminals (UTs). We study the energy efficiency of this system while taking the transceiver power consumption at the UTs and the BS into consideration. For a given spectral efficiency $R$ and fixed transceiver power consumption parameters, we propose and analyze the problem of maximizing the energy efficiency as a function of $(M,K)$. For the maximum ratio combining (MRC) detector at the BS we show that with increasing $R$, $(M,K)$ can b…
We consider a multiple-input multiple-output (MIMO) interference channel (IC), where a single data stream per user is transmitted and each receiver treats interference as noise. The paper focuses on the open problem of computing the outermost boundary (so-called Pareto boundary-PB) of the achievable rate region under linear transceiver design. The Pareto boundary consists of the strict PB and non-strict PB. For the two user case, we compute the non-strict PB and the two ending points of the strict PB exactly. For the strict PB, we formulate the problem to maximize one rate while the other rate…
In this paper, we present robust joint non-linear transceiver designs for multiuser multiple-input multiple-output (MIMO) downlink in the presence of imperfections in the channel state information at the transmitter (CSIT). The base station (BS) is equipped with multiple transmit antennas, and each user terminal is equipped with one or more receive antennas. The BS employs Tomlinson-Harashima precoding (THP) for inter-user interference pre-cancellation at the transmitter. We consider robust transceiver designs that jointly optimize the transmit THP filters and receive filter for two models of …
Next generation wireless base stations and access points will transmit and receive using extremely massive numbers of antennas. A promising technology for realizing such massive arrays in a dynamically controllable and scalable manner with reduced cost and power consumption utilizes surfaces of radiating metamaterial elements, known as metasurfaces. To date, metasurfaces are mainly considered in the context of wireless communications as passive reflecting devices, aiding conventional transceivers in shaping the propagation environment. This article presents an alternative application of metasu…
Incorporating full duplex operation in Multiple Input Multiple Output (MIMO) systems provides the potential of boosting throughput performance. However, the hardware complexity of the analog self-interference canceller in emerging full duplex MIMO designs mostly scales with the number of transmit and receive antennas, thus exploiting the benefits of analog cancellation becomes impractical for full duplex MIMO transceivers, even for moderate number of antennas. In this paper, we present two novel architectures for the analog canceller comprising of reduced number of cancellation elements, compa…
