Immersive video, such as virtual reality (VR) and multi-view videos, is growing in popularity. Its wireless streaming is an instance of general multicast, extending conventional unicast and multicast, whose effective design is still open. This paper investigates the optimization of general rate splitting with linear beamforming for general multicast. Specifically, we consider a multi-carrier single-cell wireless network where a multi-antenna base station (BS) communicates to multiple single-antenna users via general multicast. Linear beamforming is adopted at the BS, and joint decoding is adopted at each user. We consider the maximization of the weighted sum rate, which is a challenging nonconvex problem. Then, we propose an iterative algorithm for the problem to obtain a KKT point using the concave-convex procedure (CCCP). The proposed optimization framework generalizes the existing ones for rate splitting for various types of services. Finally, we numerically show substantial gains of the proposed solutions over existing schemes and reveal the design insights of general rate splitting for general multicast.
The demand of massive access to the same multimedia content at the same time is one major challenge for next-generation cellular networks in densely-packed urban areas. The content-aware multicast transmission strategies provide promising solutions to such use cases involving many mobile users trying to fetch the same data. In this work, we consider multigroup multicast transmission with a common message (e.g., multimedia content), in which different multicast groups are interested along with their private multicast messages. We further assume that a relay helps the cellular base station (BS) …
We consider the problem of transmit beamforming to multiple cochannel multicast groups. The conventional approach is to beamform a designated data stream to each group, while treating potential inter-group interference as noise at the receivers. In overloaded systems where the number of transmit antennas is insufficient to perform interference nulling, we show that inter-group interference dominates at high SNRs, leading to a saturating max-min fair performance. We propose a rather unconventional approach to cope with this issue based on the concept of Rate-Splitting (RS). In particular, part …
In a superimposed unicast and multicast transmission system, one layer of Successive Interference Cancellation (SIC) is required at each receiver to remove the multicast stream before decoding the unicast stream. In this paper, we show that a linearly-precoded Rate-Splitting (RS) strategy at the transmitter can efficiently exploit this existing SIC receiver architecture. By splitting the unicast message into common and private parts and encoding the common parts along with the multicast message into a super-common stream decoded by all users, the SIC is used for the dual purpose of separating …
A Non-Orthogonal Unicast and Multicast (NOUM) transmission system allows a multicast stream intended to all receivers to be jointly transmitted with unicast streams in the same time-frequency resource blocks. While the capacity of the two-user multi-antenna NOUM with perfect Channel State Information at the Transmitter (CSIT) is known and achieved by Dirty Paper Coding (DPC)-assisted NOUM with Superposition Coding (SC), the capacity and the capacity-achieving strategy of the multi-antenna NOUM with partial CSIT remain unknown. In this work, we focus on the partial CSIT setting and make two maj…
In this paper, we investigate the joint beamforming and power splitting design problem in a base station (BS) cluster-based cloud radio access network (C-RAN) with multicast fronthaul, where users are jointly served by BSs within each cluster. Meanwhile, each user can simultaneously obtain information and energy from received signals. On this basis, under predefined minimum harvested energy of each user and maximum transmit power of each BS and central processor, we formulate a sum rate maximization problem by jointly optimizing multicast fronthaul beamforming, cooperative access beamforming a…
In this paper, we consider multigroup multicast transmissions with different types of service messages in an overloaded multicarrier system, where the number of transmitter antennas is insufficient to mitigate all inter-group interference. We show that employing a rate-splitting based multiuser beamforming approach enables a simultaneous delivery of the multiple service messages over the same time-frequency resources in a non-orthogonal fashion. Such an approach, taking into account transmission power constraints which are inevitable in practice, outperforms classic beamforming methods as well…
Considering a two-user multi-antenna Broadcast Channel, this paper shows that linearly precoded Rate-Splitting (RS) with Successive Interference Cancellation (SIC) receivers is a flexible framework for non-orthogonal transmission that generalizes, and subsumes as special cases, four seemingly different strategies, namely Space Division Multiple Access (SDMA) based on linear precoding, Orthogonal Multiple Access (OMA), Non- Orthogonal Multiple Access (NOMA) based on linearly precoded superposition coding with SIC, and physical-layer multicasting. The paper studies the sum-rate and shows analyti…
Immersive video, such as virtual reality (VR) and multi-view videos, is growing in popularity. Its wireless streaming is an instance of general multicast, extending conventional unicast and multicast, whose effective design is still open. This paper investigates general rate splitting for general multicast. Specifically, we consider a multi-carrier single-cell wireless network where a multi-antenna base station (BS) communicates to multiple single-antenna users via general multicast. We consider linear beamforming at the BS and joint decoding at each user in the slow fading and fast fading sce…
Rate-splitting multiple access (RSMA), relying on linearly precoded rate-splitting (RS) at the transmitter and successive interference cancellation (SIC) at the receivers has emerged as a powerful and flexible multiple access strategy for downlink multi-user multi-antenna systems. Through message splitting and the transmission of both common and private messages, RSMA has been demonstrated to be a robust interference management strategy which enables partially decoding interference and partially treating interference as noise. In this work, we consider the application of RSMA in a multigroup m…
This paper investigates rate-splitting (RS) precoding for non-orthogonal unicast and multicast (NOUM) transmissions using fully-digital and hybrid precoders. We study the nonconvex weighted sum-rate (WSR) maximization problem subject to a multicast requirement. We propose FALCON, an approach based on sequential parametric optimization, to solve the aforementioned problem. We show that FALCON converges to a local optimum without requiring judicious selection of an initial feasible point. Besides, we show through simulations that by leveraging RS, hybrid precoders can attain nearly the same perf…
In a Non-Orthogonal Unicast and Multicast (NOUM) transmission system, a multicast stream intended to all the receivers is superimposed in the power domain on the unicast streams. One layer of Successive Interference Cancellation (SIC) is required at each receiver to remove the multicast stream before decoding its intended unicast stream. In this paper, we first show that a linearly-precoded 1-layer Rate-Splitting (RS) strategy at the transmitter can efficiently exploit this existing SIC receiver architecture. We further propose multi-layer transmission strategies based on the generalized RS an…
This work focuses on the promising Rate-Splitting Multiple Access (RSMA) and its beamforming design problem to achieve max-min fairness (MMF) among multiple co-channel multicast groups with imperfect channel state information at the transmitter (CSIT). Contrary to the conventional linear precoding (NoRS) that relies on fully treating any residual interference as noise, we consider a novel multigroup multicast beamforming strategy based on RSMA. RSMA relies on linearly precoded Rate-Splitting (RS) at the transmitter and Successive Interference Cancellation (SIC) at the receivers, and has recent…
In this paper, we consider the problem of achieving max-min fairness amongst multiple co-channel multicast groups through transmit beamforming. We explicitly focus on overloaded scenarios in which the number of transmitting antennas is insufficient to neutralize all inter-group interference. Such scenarios are becoming increasingly relevant in the light of growing low-latency content delivery demands, and also commonly appear in multibeam satellite systems. We derive performance limits of classical beamforming strategies using DoF analysis unveiling their limitations; for example, rates satura…
This paper considers transmit covariance matrix design for secrecy rate maximization problem in a multiple-input single-output (MISO) multicasting simultaneous wireless information and power transfer (SWIPT) system. In order to enhance the performance of the system, artificial noise (AN) is added to the transmit signal in the design for the following purposes: to reduce the received signal-to-noise ratio (SNR) at the eavesdroppers and increase the harvested energy. We assume that all the channel-state-information (CSI) is perfectly known at the transmitter and all legitimate users are capable …
This paper studies the beamforming design problem to achieve max-min fairness (MMF) in multibeam satellite communications. Contrary to the conventional linear precoding (NoRS) that relies on fully treating any residual interference as noise, we consider a novel multibeam multicast beamforming strategy based on Rate-Splitting Multiple Access (RSMA). RSMA relies on linearly precoded ratesplitting (RS) at the transmitter and Successive Interference Cancellation (SIC) at receivers to enable a flexible framework for non-orthogonal transmission and robust interbeam interference management. Aiming at…
Rate-splitting multiple access (RSMA) has been recognized as a promising physical layer strategy for 6G. Motivated by ever increasing popularity of cache-enabled content delivery in wireless communications, this paper proposes an innovative multigroup multicast transmission scheme based on RSMA for cache-aided cloud-radio access networks (C-RAN). Our proposed scheme not only exploits the properties of content-centric communications and local caching at the base stations (BSs), but also incorporates RSMA to better manage interference in multigroup multicast transmission with statistical channel…
We consider globally optimal precoder design for rate splitting multiple access in Gaussian multiple-input single-output downlink channels with respect to weighted sum rate and energy efficiency maximization. The proposed algorithm solves an instance of the joint multicast and unicast beamforming problem and includes multicast- and unicast-only beamforming as special cases. Numerical results show that it outperforms state-of-the-art algorithms in terms of numerical stability and converges almost twice as fast.
A multi-antenna transmitter that conveys independent sets of common data to distinct groups of users is herein considered, a model known as physical layer multicasting to multiple co-channel groups. In the recently proposed context of per-antenna power constrained multigroup multicasting, the present work focuses on a novel system design that aims at maximizing the total achievable throughput. Towards increasing the system sum rate, the available power resources need to be allocated to well conditioned groups of users. A detailed solution to tackle the elaborate sum rate maximization multigrou…
We consider the problem of serving multicast flows in a crossbar switch. We show that linear network coding across packets of a flow can sustain traffic patterns that cannot be served if network coding were not allowed. Thus, network coding leads to a larger rate region in a multicast crossbar switch. We demonstrate a traffic pattern which requires a switch speedup if coding is not allowed, whereas, with coding the speedup requirement is eliminated completely. In addition to throughput benefits, coding simplifies the characterization of the rate region. We give a graph-theoretic characterizati…
Multicast transmission has several distinctive traits as opposed to more commonly studied unicast networks. Specially, these include (i) identical packets must be delivered successfully to several nodes, (ii) outage could simultaneously happen at different receivers, and (iii) the multicast rate is dominated by the receiver with the weakest link in order to minimize outage and retransmission. To capture these key traits, we utilize a Poisson cluster process consisting of a distinct Poisson point process (PPP) for the transmitters and receivers, and then define the multicast transmission capaci…
This paper determines the optimum secondary user power allocation and ergodic multicast rate of point-to-multipoint communication in a cognitive radio network in the presence of outage constraints for the primary users. Using tools from extreme value theory (EVT), it is first proved that the limiting distribution of the minimum of independent and identically distributed (i.i.d.) signal-to-interference ratio (SIR) random variables (RVs) is a Weibull distribution, when the user signal and the interferer signals undergo independent and non-identically distributed (i.n.i.d.) $κ-μ$ shadowed fading.…
Signaling design for secure transmission in two-user multiple-input multiple-output (MIMO) non-orthogonal multiple access (NOMA) networks is investigated in this paper. The base station broadcasts multicast data to all users and also integrates additional services, unicast data targeted to certain users, and confidential data protected against eavesdroppers. We categorize the above MIMO-NOMA with different security requirements into several communication scenarios. The associated problem in each scenario is nonconvex. We propose a unified approach, called the power splitting scheme, for optimi…
Standard upper and lower bounds on the capacity of relay channels are cut-set (CS), decode-forward (DF), and quantize-forward (QF) rates. For real additive white Gaussian noise (AWGN) multicast relay channels with one source node and one relay node, these bounds are shown to be quasi-concave in the receiver signal-to-noise ratios and the squared source-relay correlation coefficient. Furthermore, the CS rates are shown to be quasi-concave in the relay position for a fixed correlation coefficient, and the DF rates are shown to be quasi-concave in the relay position. The latter property character…
In this paper, we propose a cooperative approach to improve the security of both primary and secondary systems in cognitive radio multicast communications. During their access to the frequency spectrum licensed to the primary users, the secondary unlicensed users assist the primary system in fortifying security by sending a jamming noise to the eavesdroppers, while simultaneously protect themselves from eavesdropping. The main objective of this work is to maximize the secrecy rate of the secondary system, while adhering to all individual primary users' secrecy rate constraints. In the case of …
Motivated in part by the problem of secure multicast distributed storage, we analyze secrecy rates for a channel in which two transmitters simultaneously multicast to two receivers in the presence of an eavesdropper. Achievable rates are calculated via extensions of a technique due to Chia and El Gamal and the method of output statistics of random binning. Outer bounds are derived for both the degraded and non-degraded versions of the channel, and examples are provided in which the inner and outer bounds meet. The inner bounds recover known results for the multiple-access wiretap channel, broa…
This paper considers a multi-antenna multicast system with programmable metasurface (PMS) based transmitter. Taking into account of the finite-resolution phase shifts of PMSs, a novel beam training approach is proposed, which achieves comparable performance as the exhaustive beam searching method but with much lower time overhead. Then, a closed-form expression for the achievable multicast rate is presented, which is valid for arbitrary system configurations. In addition, for certain asymptotic scenario, simple approximated expressions for the multicase rate are derived. Closed-form solutions …
In this paper, we investigate a hybrid multicast/ unicast scheme for a multiple-input single-output cache-aided non-orthogonal multiple access (NOMA) vehicular scenario in the face of rapidly fluctuating vehicular wireless channels. Considering a more practical situation, imperfect channel state information is taking into account. In this paper, we formulate an optimization problem to maximize the unicast sum rate under the constraints of the peak power, the peak backhaul, the minimum unicast rate, and the maximum multicast outage probability. To solve the formulated non-convex problem, a lowe…
In this letter, we study optimal multicast of tiled 360 virtual reality (VR) video from one server (base station or access point) to multiple users in an orthogonal frequency division multiple access (OFDMA) system. For given video quality, we optimize the subcarrier, transmission power and transmission rate allocation to minimize the total transmission power. For given transmission power budget, we optimize the subcarrier, transmission power and transmission rate allocation to maximize the received video quality. These two optimization problems are non-convex problems. We obtain a globally op…
Consider transceiver designs in a multiuser multi-input single-output (MISO) downlink channel, where the users are to receive the same data stream simultaneously. This problem, known as physical-layer multicasting, has drawn much interest. Presently, a popularized approach is transmit beamforming, in which the beamforming optimization is handled by a rank-one approximation method called semidefinite relaxation (SDR). SDR-based beamforming has been shown to be promising for a small or moderate number of users. This paper describes two new transceiver strategies for physical-layer multicasting. …
Multicast transmission, wherein the same packet must be delivered to multiple receivers, is an important aspect of sensor and tactical networks and has several distinctive traits as opposed to more commonly studied unicast networks. Specially, these include (i) identical packets must be delivered successfully to several nodes, (ii) outage at any receiver requires the packet to be retransmitted at least to that receiver, and (iii) the multicast rate is dominated by the receiver with the weakest link in order to minimize outage and retransmission. A first contribution of this paper is the develo…
The problem of maximizing the average rate in a multicast network subject to a coverage constraint (minimum quality of service) is studied. Assuming the channel state information is available only at the receiver side and single antenna nodes, the highest expected rate achievable by a random user in the network, called expected typical rate, is derived in two scenarios: hard coverage constraint and soft coverage constraint. In the first case, the coverage is expressed in terms of the outage probability, while in the second case, the expected rate should satisfy certain minimum requirement. It …
Multicast device-to-device (D2D) transmission is important for applications like local file transfer in commercial networks and is also a required feature in public safety networks. In this paper we propose a tractable baseline multicast D2D model, and use it to analyze important multicast metrics like the coverage probability, mean number of covered receivers and throughput. In addition, we examine how the multicast performance would be affected by certain factors like mobility and network assistance. Take the mean number of covered receivers as an example. We find that simple repetitive tran…
Multicasting, where a base station (BS) wishes to convey the same message to several user equipments (UEs), represents a common yet highly challenging wireless scenario. In fact, guaranteeing decodability by the whole UE population proves to be a major performance bottleneck since the UEs in poor channel conditions ultimately determine the achievable rate. To overcome this issue, two-phase cooperative multicasting schemes, which use conventional multicasting in a first phase and leverage device-to-device (D2D) communications in a second phase to effectively spread the message, have been extens…
This paper examines the problem of rate allocation for multicasting over slow Rayleigh fading channels using network coding. In the proposed model, the network is treated as a collection of Rayleigh fading multiple access channels. In this model, rate allocation scheme that is based solely on the statistics of the channels is presented. The rate allocation scheme is aimed at minimizing the outage probability. An upper bound is presented for the probability of outage in the fading multiple access channel. A suboptimal solution based on this bound is given. A distributed primal-dual gradient alg…
Cloud radio access network (C-RAN) has been recognized as a promising architecture for next-generation wireless systems to \textcolor{black}{support} the rapidly increasing demand for higher data rate. However, the performance of C-RAN is limited by the backhaul capacities, especially for the wireless deployment. While C-RAN with fixed BS caching has been demonstrated to reduce backhaul consumption, it is more challenging to further optimize the cache allocation at BSs with multi-cluster multicast backhaul, where the inter-cluster interference induces additional non-convexity to the cache opti…
The problem of simultaneous multicasting of multiple messages with the help of a relay terminal is considered. In particular, a model is studied in which a relay station simultaneously assists two transmitters in multicasting their independent messages to two receivers. The relay may also have an independent message of its own to multicast. As a first step to address this general model, referred to as the compound multiple access channel with a relay (cMACr), the capacity region of the multiple access channel with a "cognitive" relay is characterized, including the cases of partial and rate-li…
We provide a geometric solution to the problem of optimal relay positioning to maximize the multicast rate for low-SNR networks. The networks we consider, consist of a single source, multiple receivers and the only intermediate and locatable node as the relay. We construct network the hypergraph of the system nodes from the underlying information theoretic model of low-SNR regime that operates using superposition coding and FDMA in conjunction (which we call the "achievable hypergraph model"). We make the following contributions. 1) We show that the problem of optimal relay positioning maximiz…
This paper considers an artificial noise (AN)-aided transmit design for multi-user MIMO systems with integrated services. Specifically, two sorts of service messages are combined and served simultaneously: one multicast message intended for all receivers and one confidential message intended for only one receiver and required to be perfectly secure from other unauthorized receivers. Our interest lies in the joint design of input covariances of the multicast message, confidential message and artificial noise (AN), such that the achievable secrecy rate and multicast rate are simultaneously maxim…
This paper studies energy-efficient joint transmit and receive beamforming in multi-cell multi-user multiple-input multiple-output systems. We consider conventional network energy efficiency metric where the users can receive unicasting streams in addition to the group-specific common multicasting streams which have certain rate constraints. The goal is to use the transmission resources more efficiently to improve the energy efficiency, when the users are equipped with multiple antennas. Numerical results show the achieved energy efficiency gains by using the additional degrees of freedom of t…
We consider communication over heterogeneous parallel channels, where a transmitter is connected to two users via two parallel channels: a MIMO broadcast channel (BC) and a noiseless rate-limited multicast channel. We characterize the optimal degrees of freedom (DoF) region of this setting when the transmitter has delayed channel state information (CSIT) regarding the MIMO BC. Our results show that jointly coding over the two channels strictly outperforms simple channel aggregation and can even achieve the instantaneous CSIT performance with completely outdated CSIT on the MIMO BC in the sum D…
In this paper, we investigate the impact of network coding at the relay node on the stable throughput rate in multicasting cooperative wireless networks. The proposed protocol adopts Network-level cooperation in contrast to the traditional physical layer cooperative protocols and in addition uses random linear network coding at the relay node. The traffic is assumed to be bursty and the relay node forwards its packets during the periods of source silence which allows better utilization for channel resources. Our results show that cooperation will lead to higher stable throughput rates than con…
With the use of common signaling methods for dual-function radar-communications (DFRC) systems, the susceptibility of eavesdropping on messages aimed at legitimate users has worsened. For DFRC systems, the radar target may act as an eavesdropper (ED) that receives a high-energy signal thereby leading to additional challenges. Unlike prior works, we consider a multicast multi-antenna DFRC system with multiple EDs. We then propose a physical layer design approach to maximize the secrecy rate by installing intelligent reflecting surfaces in the radar channels. Our optimization of multiple ED mult…
Intelligent reflecting surfaces (IRSs) have shown huge advantages in many potential use cases and thus have been considered a promising candidate for next-generation wireless systems. In this paper, we consider an IRS-assisted multigroup multicast (IRS-MGMC) system in a multiple-input single-output (MISO) scenario, for which the related existing literature is rather limited. In particular, we aim to jointly design the transmit beamformers and IRS phase shifts to maximize the sum rate of the system under consideration. In order to obtain a numerically efficient solution to the formulated non-co…
This paper studies an unmanned aerial vehicle (UAV)-enabled multicast channel, in which a UAV serves as a mobile transmitter to deliver common information to a set of $K$ ground users. We aim to characterize the capacity of this channel over a finite UAV communication period, subject to its maximum speed constraint and an average transmit power constraint. To achieve the capacity, the UAV should use a sufficiently long code that spans over its whole communication period. Accordingly, the multicast channel capacity is achieved via maximizing the minimum achievable time-averaged rates of the $K$…
In this paper, assuming multi-antenna transmitter and receivers, we consider multicast beamformer design for the weighted max-min-fairness (WMMF) problem in a multi-stream multi-group communication setup. Unlike the single-stream scenario, the WMMF objective in this setup is not equivalent to maximizing the minimum weighted SINR due to the summation over the rates of multiple streams. Therefore, the non-convex problem at hand is first approximated with a convex one and then solved using Karush-Kuhn-Tucker (KKT) conditions. Then, a practically appealing closed-form solution is derived, as a fun…
In this letter, we study optimal multicast of tiled 360 virtual reality (VR) video from one server (base station or access point) to multiple users. We consider random viewing directions and random channel conditions, and adopt time division multiple access (TDMA). For given video quality, we optimize the transmission time and power allocation to minimize the average transmission energy. For given transmission energy budget, we optimize the transmission time and power allocation as well as the encoding rate of each tile to maximize the received video quality. These two optimization problems ar…
Multicast beamforming is a key technology for next-generation wireless cellular networks to support high-rate content distribution services. In this paper, the coordinated downlink multicast beamforming design in multicell networks is considered. The goal is to maximize the minimum signal-to-interference-plus-noise ratio of all users under individual base station power constraints. We exploit the fractional form of the objective function and geometric properties of the con-straints to reformulate the problem as a parametric manifold optimization program. Afterwards we propose a low-complexity …
Immersive virtual reality (VR) applications require ultra-high data rate and low-latency for smooth operation. Hence in this paper, aiming to improve VR experience in multi-user VR wireless video streaming, a deep-learning aided scheme for maximizing the quality of the delivered video chunks with low-latency is proposed. Therein the correlations in the predicted field of view (FoV) and locations of viewers watching 360$^\circ$ HD VR videos are capitalized on to realize a proactive FoV-centric millimeter wave (mmWave) physical-layer multicast transmission. The problem is cast as a frame quality…
Multi-resolution codes enable multicast at different rates to different receivers, a setup that is often desirable for graphics or video streaming. We propose a simple, distributed, two-stage message passing algorithm to generate network codes for single-source multicast of multi-resolution codes. The goal of this "pushback algorithm" is to maximize the total rate achieved by all receivers, while guaranteeing decodability of the base layer at each receiver. By conducting pushback and code generation stages, this algorithm takes advantage of inter-layer as well as intra-layer coding. Numerical …
This paper studies the multi-antenna multicast channel with integrated sensing and communication (ISAC), in which a multi-antenna base station (BS) sends common messages to a set of single-antenna communication users (CUs) and simultaneously estimates the parameters of an extended target via radar sensing. We investigate the fundamental performance limits of this ISAC system, in terms of the achievable rate for communication and the estimation Cramér-Rao bound (CRB) for sensing. First, we derive the optimal transmit covariance in semi-closed form to balance the CRB-rate (C-R) tradeoff, and acc…
