By varying the oil volume fraction, the microscopic droplet size and the macroscopic rheology of emulsions are investigated in a Taylor-Couette (TC) turbulent shear flow. Although here oil and water in the emulsions have almost the same physical properties (density and viscosity), unexpectedly, we find that oil-in-water (O/W) and water-in-oil (W/O) emulsions have very distinct hydrodynamic behaviors, i.e., the system is clearly asymmetric. By looking at the micro-scales, the average droplet diameter hardly changes with the oil volume fraction neither for O/W nor for W/O. However, for W/O it is about 50% larger than that of O/W. At the macro-scales, the effective viscosity of O/W is higher when compared to that of W/O. These asymmetric behaviors can be traced back to the presence of surface-active contaminants in the system. By introducing an oil-soluble surfactant at high concentration, remarkably, we recover the symmetry (droplet size and effective viscosity) between O/W and W/O emulsions. Based on this, we suggest a possible mechanism responsible for the initial asymmetry. Next, we discuss what sets the droplet size in turbulent emulsions. We uncover a -6/5 scaling dependence of the droplet size on the Reynolds number of the flow. Combining the scaling dependence and the droplet Weber number, we conclude that the droplet fragmentation, which determines the droplet size, occurs within the boundary layer and is controlled by the dynamic pressure caused by the gradient of the mean flow, as proposed by Levich (1962), instead of the dynamic pressure due to turbulent fluctuations, as proposed by Kolmogorov (1949). The present findings provide an understanding of both the microscopic droplet formation and the macroscopic rheological behaviors in dynamic emulsification, and connects them.
This work analyzes trajectories obtained by YOLO and DeepSORT algorithms of dense emulsion systems simulated by Lattice Boltzmann methods. The results indicate that the individual droplet's moving direction is influenced more by the droplets immediately behind it than the droplets in front of it. The analysis also provides hints on constraints on writing down a dynamical model of droplets for the dense emulsion in narrow channels.
In this study, we present experimental and theoretical analyses of double emulsion drop evaporation. After the apparent completion of evaporation of the inner phase of a double emulsion drop, surprisingly, a resurfacing of a daughter droplet is observed. We further investigated to hypothesize this phenomenon which allowed us to obtain a prolonged fixed contact line evaporation for a single phase drop along with similar occurrence of resurfacing as of the double emulsion drops.
We numerically study the Rayleigh-Bénard (RB) convection in two-dimensional model emulsions confined between two parallel walls at fixed temperatures. The systems under study are heterogeneous, with finite-size droplets dispersed in a continuous phase. The droplet concentration is chosen to explore the convective heat transfer of both Newtonian (low droplet concentration) and non-Newtonian (high droplet concentration) emulsions, the latter exhibiting shear-thinning rheology, with a noticeable increase of viscosity at low shear rates. It is well known that the transition to convection of a homo…
We present mesoscale numerical simulations of Rayleigh-Bénard convection in a two-dimensional concentrated emulsion, confined between two parallel walls, heated from below and cooled from above, under the effect of buoyancy forces. The systems under study comprise finite-size droplets, whose concentration $Φ_0$ is varied, ranging from the dilute limit up to the point where the emulsion starts to be packed and exhibits non-Newtonian rheology. We focus on the characterisation of the convective heat transfer properties close to the transition from conductive to convective states. The convective f…
Ultrasound-vaporizable microdroplets can be exploited for targeted drug delivery. However, it requires customized microfluidic techniques able to produce monodisperse, capillary-sized and biocompatible multiple emulsions. Recent development of microfluidic devices led to the optimization of microdroplet production with high yields, low polydispersity and well-defined diameters. So far, only few were shown to be efficient for simple droplets or multiple emulsions production below 5 microns in diameter, which is required to prevent microembolism after intravenous injection. Here, we present a ve…
Droplet microfluidics, in which micro-droplets serve as individual reactors, has enabled a wide range of high-throughput biochemical processes. Unlike solid wells typically used in current biochemical assays, droplets are subject to instability and can undergo breakup, especially under fast flow conditions. Although the physics of single drops has been studied extensively, the flow of crowded drops or concentrated emulsions, where droplet volume fraction exceeds 80 percent, is relatively unexplored in microfluidics. In this article and the related invited lecture from the 74th Annual Meeting o…
We present mesoscale numerical simulations of Rayleigh-Bénard (RB) convection in a two-dimensional model emulsion. The systems under study are constituted of finite-size droplets, whose concentration Phi_0 is systematically varied from small (Newtonian emulsions) to large values (non-Newtonian emulsions). We focus on the characterisation of the heat transfer properties close to the transition from conductive to convective states, where it is known that a homogeneous Newtonian system exhibits a steady flow and a time-independent heat flux. In marked contrast, emulsions exhibit a non-steady dyna…
We observe electro-hydrodynamically driven turbulent flows at low Reynolds numbers in a two-fluid emulsion consisting of micron-scale droplets. In the presence of electric fields, the droplets produce interacting hydrodynamic flows which result in a dynamical organization at a spatial scale much larger than the size of the individual droplets. We characterize the dynamics associated with these structures by both video imaging and a simultaneous, in situ, measurement of the time variation of the bulk Reynolds stress with a rheometer. The results display scale invariance in the energy spectra in…
We investigate imbibition of a monodisperse emulsion into a low-aspect ratio microfluidic channel with the height h comparable to the droplet diameter d. For confinement ratio d/h = 1.2, the tightly confined disk-like droplets in the channel move more slowly compared to the average suspension velocity. Behind the meniscus that drives the imbibition, there is a droplet-free region, separated from the suspension region by a sharp concentration front. The suspension exhibits strong droplet density and velocity fluctuations, but on average, the suspension domain remains uniform. For weaker confine…
This study concerns the effects of pressure, spatial location, and application of oil emulsions on the resulting droplet size, eccentricity, as well as velocity distributions, all of which are crucial information in determining the dispersion dynamics of the droplets during the spray applications. Experiments were conducted with the abovementioned droplets information measured using digital inline holography (DIH). Results show that the volumetric droplet size distributions (VDSD) span widely from sub-200 um to over 2 mm in size. The application of an oil-in-water emulsion results largely in t…
Protein-stabilised emulsions can be seen as mixtures of unadsorbed proteins and of protein-stabilised droplets. To identify the contributions of these two components to the overall viscosity of sodium caseinate o/w emulsions, the rheological behaviour of pure suspensions of proteins and droplets were characterised, and their properties used to model the behaviour of their mixtures. These materials are conveniently studied in the framework developed for soft colloids. Here, the use of viscosity models for the two types of pure suspensions facilitates the development of a semi-empirical model th…
The effect of a spatially uniform magnetic field on the shear rheology of a dilute emulsion of monodispersed ferrofluid droplets, immersed in a non-magnetizable immiscible fluid, is investigated using direct numerical simulations. The direction of the applied magnetic field is normal to the shear flow direction. The droplets extra stress tensor arising from the presence of interfacial forces of magnetic nature is modeled on the basis of the seminal work of G. K. Batchelor, J. Fluid Mech., 41.3 (1970) under the assumptions of a linearly magnetizable ferrofluid phase and negligible inertia. The …
We numerically investigate the rheological response of a non-coalescing multiple emulsion under a symmetric shear flow. We find that the dynamics significantly depends on the magnitude of the shear rate and on the number of the encapsulated droplets, two key parameters whose control is fundamental to accurately select the resulting non-equilibrium steady states. The double emulsion, for instance, attains a static steady state in which the external droplet stretches under flow and achieves an elliptical shape (closely resembling the one observed in a sheared isolated fluid droplet), while the i…
In this paper, we present TLBfind, a GPU code for simulating the hydrodynamics of droplets along with a dynamic temperature field. TLBfind hinges on a two-dimensional multi-component lattice Boltzmann (LB) model simulating a concentrated emulsion with finite-size droplets evolving in a thermal convective state, just above the transition from conduction to convection. The droplet concentration of the emulsion system is tenable, and at the core of the code lies the possibility to measure a large number of physical observables characterising the flow and droplets. Furthermore, TLBfind includes a …
Atomization of emulsion droplets is ubiquitous across a variety of application domains ranging from NextGen combustors to fabrication of biomedical implants. An understanding of the atomization mechanism in emulsions can result in a paradigm shift in customized designs of efficient systems, be it in energy or biotechnology sectors. In this paper, we specifically study the breakup mechanism of an evaporating contact-free (acoustic levitation) emulsion droplet (water-oil) under external heating. Three distinct regimes are observed during the lifespan of the evaporating droplet. Initially, the dr…
The present study deals with the effect of interfacial slip on the deformation and emulsion rheology of a dilute suspension of droplets in a linear flow. The droplets are laden with surfactants that are bulk-insoluble and get transported only along the interface. An asymptotic approach is adopted for the present analysis in order to tackle the nonlinearity present due to deformation of droplets. The analysis is carried out under two different limiting scenarios namely: surface diffusion-dominated-surfactant transport and surface convection-dominated surfactant transport. For either of the limi…
The Marangoni effect refers to fluid flow induced by a gradient in surface tension at a fluid-fluid interface. We determine the full three-dimensional Marangoni flow generated by a non-uniform surface tension profile at the interface of a self-propelled spherical emulsion droplet. For all flow fields inside, outside, and at the interface of the droplet, we give analytical formulas. We also calculate the droplet velocity vector $\mathbf{v}^D$, which describes the swimming kinematics of the droplet, and generalize the squirmer parameter $β$, which distinguishes between different swimmer types ca…
We report an easy-to-implement method that allows the direct generation of water-in-water (w/w) single emulsions. The method relies on direct perturbation of the pressure that drives the flow of the dispersed phase of the emulsions. The resultant inner jet is induced to break up into droplets due to the growth of the perturbation through Rayleigh-Plateau instability [L. Rayleigh, Proc. R. Soc. London 29, 71-97 (1879)]; this leads to the formation of monodisperse droplets. By implementing this method on a modified microfluidic device, we directly generate water-in-water-in-water (w/w/w) double …
We delineate and examine the distinct breakup modes of evaporating water-in-oil emulsion droplets under acoustic levitation. The emulsion droplets consist of decane/dodecane/tetradecane as oil, while the water concentration is varied from 10% to 30% (v/v). The droplets were heated under different laser irradiation intensities and were observed to exhibit three broad breakup mechanisms, viz., breakup through bubble growth, sheet breakup, and catastrophic breakup. The occurrence of these modes of the breakup is found to be primarily dependent on the volatility differential among the components. …
Double emulsion formation in a hierarchical flow-focusing channel is systematically investigated using a free energy ternary lattice Boltzmann model. A three dimensional formation regime diagram is constructed based on the capillary numbers of the inner ($Ca_i$), middle ($Ca_m$) and outer ($Ca_o$) phase fluids. The results show that the formation diagram can be classified into periodic two-step region, periodic one-step region, and non-periodic region. By varying $Ca_i$ and $Ca_m$ in the two-step formation region, different morphologies are obtained, including the regular double emulsions, dec…
Multiphase shear flows often show banded structures that affect the global behavior of complex fluids e.g. in microdevices. Here we investigate numerically the banding of emulsions, i.e. the formation of regions of high and low volume fraction, alternated in the vorticity direction and aligned with the flow (shear bands). These bands are associated with a decrease of the effective viscosity of the system. To understand the mechanism of banding experimentally observed we have performed interface resolved simulations of the two-fluid system. The experiments were perfomed starting with a random d…
Turbulent emulsions are complex physical systems characterized by a strong and dynamical coupling between small-scale droplets and large-scale rheology. By using a specifically designed Taylor-Couette (TC) shear flow system, we are able to characterize the statistical properties of a turbulent emulsion made of oil droplets dispersed in an ethanol-water continuous solution, at the oil volume fraction up to 40%. We find that the dependence of the droplet size on the Reynolds number of the flow at the volume fraction of 1% can be well described by Hinze's criterion. The distribution of droplet si…
In the present study we analytically investigate the deformation and bulk rheology of a dilute emulsion of surfactant-laden droplets suspended in a linear flow. We use an asymptotic approach to predict the effect of surfactant distribution on the deformation of a single droplet as well as the effective shear and extensional viscosity for the dilute emulsion. The non-uniform distribution of surfactants due to the bulk flow results in the generation of a Marangoni stress which affects both the deformation as well as the bulk rheology of the suspension. The present analysis is done for the limiti…
The rheology of pressure-driven flows of two-dimensional dense monodisperse emulsions in neutral wetting microchannels is investigated by means of mesoscopic lattice simulations, capable of handling large collections of droplets, in the order of several hundreds. The simulations reveal that the fluidization of the emulsion proceeds through a sequence of discrete steps, characterized by yielding events whereby layers of droplets start rolling over each other, thus leading to sudden drops of the relative effective viscosity. It is shown that such discrete fluidization is robust against loss of c…
We investigate the 3D structure and drying dynamics of complex mixtures of emulsion droplets and colloidal particles, using confocal microscopy. Air invades and rapidly collapses large emulsion droplets, forcing their contents into the surrounding porous particle pack at a rate proportional to the square of the droplet radius. By contrast, small droplets do not collapse, but remain intact and are merely deformed. A simple model coupling the Laplace pressure to Darcy's law correctly estimates both the threshold radius separating these two behaviors, and the rate of large-droplet evacuation. Fin…
Stabilized dense emulsions display a rich phenomenology connecting microstructure and rheology. In this work we study how an emulsion with a finite yield stress can be built via large-scale stirring. By gradually increasing the volume fraction of the dispersed minority phase, under the constant action of a stirring force, we are able to achieve volume fractions close to $80\%$. Despite the fact that our system is highly concentrated and not yet turbulent we observe a droplet size distribution consistent with the $-10/3$ scaling, often associated to inertial range droplets breakup. We report th…
We have measured the spatial distribution of motile Escherichia coli inside spherical water droplets emulsified in oil. At low cell concentrations, the cell density peaks at the water-oil interface; at increasing concentration, the bulk of each droplet fills up uniformly while the surface peak remains. Simulations and theory show that the bulk density results from a `traffic' of cells leaving the surface layer, increasingly due to cell-cell scattering as the surface coverage rises above $\sim 10\%$. Our findings show similarities with the physics of a rarefied gas in a spherical cavity with at…
We perform direct numerical simulations (DNSs) of emulsions in homogeneous, isotropic turbulence using a pseudopotential lattice-Boltzmann (PP-LB) method. Improving on previous literature by minimizing droplet dissolution and spurious currents, we show that the PP-LB technique is capable of long, stable simulations in certain parameter regions. Varying the dispersed phase volume fraction $ϕ$, we demonstrate that droplet breakup extracts kinetic energy from the larger scales while injecting energy into the smaller scales, increasingly with higher $ϕ$, with the Hinze scale dividing the two effec…
This fluid dynamics video shows how an oil-in-water emulsion stabilized by an ionic surfactant spreads on the free surface of a layer of pure water. The spreading shows two intriguing features: a transparent area surrounding the source of oil droplets, and a fast retraction of the layer of oil droplets on itself once the source has emptied. We show that the dynamics of spreading are strongly connected to the interfacial/bulk properties of the surfactant.
The influence of geometrical parameters and fluid properties on the critical pressure of permeation of an oil micro-droplet into a slotted pore is studied numerically by solving the Navier-Stokes equations. We consider a long slotted pore, which is partially blocked by the oil droplet but allows a finite permeate flux. An analytical estimate of the critical permeation pressure is obtained from a force balance model that involves the drag force from the flow around the droplet and surface tension forces as well as the pressure variation inside the pore. It was found that numerical results for t…
We present a numerical study of the rheology of a two-fluid emulsion in dilute and semidilute conditions. The analysis is performed for different capillary numbers, volume fraction and viscosity ratio under the assumption of negligible inertia and zero buoyancy force. The effective viscosity of the system increases for low values of the volume fraction and decreases for higher values, with a maximum for about 20 % concentration of the disperse phase. When the dispersed fluid has lower viscosity, the normalised effective viscosity becomes smaller than 1 for high enough volume fractions. To sing…
Droplet impact of emulsions on inclined microstructured surfaces
Facultad de Ingeniería, Universidad Nacional Autónoma de México（墨西哥国立自治大学工程学院）；Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México（墨西哥国立自治大学材料研究所）
Emulsions are common in many natural and industrial settings. Recently, much attention has been put on understanding the dynamics of turbulent emulsions. This paper reviews some recent studies of emulsions in turbulent Taylor-Couette flow, mainly focusing on the statistics of the dispersed phase and the global momentum transport of the system. We first study the size distribution and the breakup mechanism of the dispersed droplets for turbulent emulsions with a low volume-fraction (dilute) of the dispersed phase. For systems with a high volume-fraction of the dispersed phase (dense), we addres…
Understanding the fluid-structure interaction is crucial for an optimal design and manufacturing of soft mesoscale materials. Multi-core emulsions are a class of soft fluids assembled from cluster configurations of deformable oil-water double droplets (cores), often employed as building-blocks for the realisation of devices of interest in bio-technology, such as drug-delivery, tissue engineering and regenerative medicine. Here, we study the physics of multi-core emulsions flowing in microfluidic channels and report numerical evidence of a surprisingly rich variety of driven non-equilibrium sta…
We numerically study the dynamics of a polydisperse double emulsion under a symmetric shear flow. We show that both dispersity and shear rate crucially affect the behavior of the innermost drops and of the surrounding shell. While at low/moderate values of shear rates the inner drops rotate periodically around a common center of mass triggered by the fluid vortex formed within the emulsion generally regardless of their polydispersity, at higher values such dynamics occurs only at increasing polydispersity, since monodisperse drops are found to align along the shear flow and become approximatel…
This study addresses the issue of oil removal from water using hydrophilic porous membranes. The effective separation of oil-in-water dispersions involves high flux of water through the membrane and, at the same time, high rejection rate of the oil phase. The effects of transmembrane pressure and crossflow velocity on rejection of oil droplets and thin oil films by pores of different cross-section are investigated numerically by solving the Navier-Stokes equation. We found that in the absence of crossflow, the critical transmembrane pressure, which is required for the oil droplet entry into a …
The present study theoretically predicts the effect of interfacial viscosity on the deformation of a compound drop as well as on the bulk rheology. The system at hand comprises of a dilute emulsion of concentric compound drops, laden with surfactants and suspended in a linear flow. Two types of linear flows are considered in this study, namely, a uniaxial extensional flow and a simple shear flow. Presence of surfactants along the drop surface leads to the generation of an interfacial viscosity, which is different from the bulk. This interfacial viscosity generates a viscous drag that along wit…
Microfluidic chips provide unparalleled control over droplets and jets, which have advanced all natural sciences. However, microfluidic applications could be vastly expanded by increasing the per-channel throughput and directly exploiting the output of chips for rapid additive manufacturing. We unlock these features with in-air microfluidics, a new chip-free platform to manipulate microscale liquid streams in the air. By controlling the composition and in-air impact of liquid microjets by surface tension-driven encapsulation, we fabricate monodisperse emulsions, particles, and fibers with diam…
The theory for linear deformations of fluid microparticles in a laser beam of Gaussian profile is presented, when the beam focus is at the particle center as in optical trapping. Three different fluid systems are considered: water microdroplet in air, air microbubble in water, and a special oil-emulsion in water system used in experiments with optical deformation of fluid interfaces. We compare interface deformations of the three systems when illuminated by a wide (compared to particle radius) and narrow laser beams and analyse differences. Deformations of droplets are radically different from…
In this work, we present a characterization of phase configuration in water-saturated sintered glass bead samples after oil injection, through the analysis of time-dependent diffusion coefficients obtained from sets of one-dimensional pulsed field gradient nuclear magnetic resonance (PFG NMR) measurements, pre and post drainage. Estimates of samples surface-to-volume ratio and permeability from pre drainage PFG measurements in a water-saturated sample were compared with analytical and reported values, respectively, and a fair agreement was found in both cases. Short-time analysis of diffusion …
Laplace pressure driven snap-off is a technique that is used to produce droplets for emulsions and microfluidics purposes. Previous predictions of droplet size have assumed a quasi-equilibrium low flow limit. We present a simple model to predict droplet sizes over a wide range of flow rates, demonstrating a rich landscape of droplet stability depending on droplet size and growth rate. The model accounts for the easily adjusted experimental parameters of geometry, interfacial tension, and the viscosities of both phases.
Here, we trap and control the position of droplets to study their dynamics using hydrodynamic forces alone without an external field. The hydrodynamic trap is adapted from a previously implemented Stokes trap by incorporating a drop-on-demand system to generate droplets at a T-junction geometry on the same microfluidic chip. We then study confined droplet dynamics in response to perturbation by applying a millisecond-pressure pulse to deform trapped droplets. Droplet shape relaxation after cessation of the pressure pulse follows an exponential decay. The characteristic droplet shape relaxation…
In this work, we present two types of microfluidic chips involving magnetic nanoparticles dispersed in cyclohexane with oleic acid. In the first case, the hydrophobically coated nanoparticles are self-assembled with an amphiphilic diblock copolymer by a double-emulsion process in order to prepare giant magnetic vesicles (polymersomes) in one step and at a high throughput. It was shown in literature that such diblock copolymer W/O/W emulsion droplets can evolve into polymersomes made of a thin (nanometric) magnetic membrane through a dewetting transition of the oil phase from the aqueous intern…
