We present mesoscale numerical simulations of Rayleigh-Bénard (RB) convection in a two-dimensional model emulsion. The systems under study are constituted of finite-size droplets, whose concentration Phi_0 is systematically varied from small (Newtonian emulsions) to large values (non-Newtonian emulsions). We focus on the characterisation of the heat transfer properties close to the transition from conductive to convective states, where it is known that a homogeneous Newtonian system exhibits a steady flow and a time-independent heat flux. In marked contrast, emulsions exhibit a non-steady dynamics with fluctuations in the heat flux. In this paper, we aim at the characterisation of such non-steady dynamics via detailed studies on the time-averaged heat flux and its fluctuations. To understand the time-averaged heat flux, we propose a side-by-side comparison between the emulsion system and a single-phase (SP) system, whose viscosity is constructed from the shear rheology of the emulsion. We show that such local closure works well only when a suitable degree of coarse-graining (at the droplet scale) is introduced in the local viscosity. To delve deeper into the fluctuations in the heat flux, we propose a side-by-side comparison between a Newtonian emulsion and a non-Newtonian emulsion, at fixed time-averaged heat flux. This comparison elucidates that finite-size droplets and the non-Newtonian rheology cooperate to trigger enhanced heat-flux fluctuations at the droplet scales. These enhanced fluctuations are rooted in the emergence of space correlations among distant droplets, which we highlight via direct measurements of the droplets displacement and the characterisation of the associated correlation function. The observed findings offer insights on heat transfer properties for confined systems possessing finite-size constituents.
We report experimental measurements of heat transport in rotating Rayleigh-B{é}nard convection in a cylindrical convection cell with aspect ratio $Γ= 1/2$. The fluid was helium gas with Prandtl number Pr = 0.7. The range of control parameters was Rayleigh number $4 \times 10^9 < {\rm Ra} < 4 \times 10^{11}$ and Ekman number $2 \times 10^{-7} < {\rm Ek} < 3 \times 10^{-5}$(corresponding to Taylor number $4 \times 10^9 < {\rm Ta} < 1 \times 10^{14}$ and convective Rossby number $0.07 < {\rm Ro} < 5$). We determine the crossover from weakly rotating turbulent convection to rotation dominated geos…
We report Particle Image Velocimetry of the Large Scale Circulation and the viscous boundary layer in turbulent thermal convection. We use two parallelepipedic Rayleigh-B{é}nard cells with a top smooth plate. The first one has a rough bottom plate and the second one has a smooth one so we compare the rough-smooth and the smooth-smooth configurations. The dimensions of the cell allow to consider a bi-dimensional mean flow. Lots of previous heat flux measurements have shown a Nusselt--Rayleigh regime transition corresponding to an increase of the heat flux in presence of roughness which is highe…
We present mesoscale numerical simulations of Rayleigh-Bénard convection in a two-dimensional concentrated emulsion, confined between two parallel walls, heated from below and cooled from above, under the effect of buoyancy forces. The systems under study comprise finite-size droplets, whose concentration $Φ_0$ is varied, ranging from the dilute limit up to the point where the emulsion starts to be packed and exhibits non-Newtonian rheology. We focus on the characterisation of the convective heat transfer properties close to the transition from conductive to convective states. The convective f…
In agreement with a recent experimental discovery by Xia et. al. (2009), we also find a sloshing mode in experiments on the large-scale circulation (LSC) of turbulent Rayleigh-Benard convection in a cylindrical sample of aspect ratio one. The sloshing mode has the same frequency as the torsional oscillation discovered by Funfschilling and Ahlers (2004). We show that both modes can be described by an extension of a model developed previously [Brown and Ahlers (2008)] which consists of permitting a lateral displacement of the LSC circulation plane away from the vertical center line of the sample…
We experimentally test the effects of tilting a turbulent Rayleigh-B{é}nard convection cell on the dynamics of the large-scale circulation (LSC) orientation $θ_0$. The probability distribution of $θ_0$ is measured, and used to obtain a tilt-induced potential acting on $θ_0$, which is used in a low-dimensional model of diffusion of $θ_0$ in a potential. The form of the potential is sinusoidal in $θ_0$, and linear in tilt angle for small tilt angles, which is explained by a simple geometric model of the vector direction of the mean buoyancy force acting on the LSC. However, the magnitude of the …
We test the ability of a low-dimensional turbulence model to predict how dynamics of large-scale coherent structures such as convection rolls change in different cell geometries. We performed Rayleigh-Bénard convection experiments in a cubic container, in which there is a single convection roll known as the large-scale circulation (LSC). The model describes the motion of the orientation $θ_0$ of the LSC as diffusion in a potential which is predicted as a function of the shape of the cell from an approximate solutions of the Navier-Stokes equations. The model predicts advected oscillation modes…
Results from direct numerical simulations of vertical natural convection at Rayleigh numbers $1.0\times 10^5$-$1.0\times 10^9$ and Prandtl number $0.709$ support a generalised applicability of the Grossmann-Lohse (GL) theory, which was originally developed for horizontal natural (Rayleigh-B{é}nard) convection. In accordance with the GL theory, it is shown that the boundary-layer thicknesses of the velocity and temperature fields in vertical natural convection obey laminar-like Prandtl-Blasius-Pohlhausen scaling. Specifically, the normalised mean boundary-layer thicknesses scale with the $-1/2$…
We report an easy-to-implement method that allows the direct generation of water-in-water (w/w) single emulsions. The method relies on direct perturbation of the pressure that drives the flow of the dispersed phase of the emulsions. The resultant inner jet is induced to break up into droplets due to the growth of the perturbation through Rayleigh-Plateau instability [L. Rayleigh, Proc. R. Soc. London 29, 71-97 (1879)]; this leads to the formation of monodisperse droplets. By implementing this method on a modified microfluidic device, we directly generate water-in-water-in-water (w/w/w) double …
A series of numerical simulations of Rayleigh-B{é}nard convection in a cubic cavity are conducted in order to examine the structure of the thermal boundary layer in case of mixed boundary conditions. The main goal of the study is the physical mechanism which provides increasing of heat flux with spatial frequency of conducting-adiabatic pattern. Different spatial configuration of conducting plates, including the fractal one, are considered for Rayleigh numbers from $\Ray=10^{7}$ to $\Ray=2.0\times 10^{9}$. We have shown that the temperature boundary layer in case of mixed boundary conditions a…
We numerically study the Rayleigh-Bénard (RB) convection in two-dimensional model emulsions confined between two parallel walls at fixed temperatures. The systems under study are heterogeneous, with finite-size droplets dispersed in a continuous phase. The droplet concentration is chosen to explore the convective heat transfer of both Newtonian (low droplet concentration) and non-Newtonian (high droplet concentration) emulsions, the latter exhibiting shear-thinning rheology, with a noticeable increase of viscosity at low shear rates. It is well known that the transition to convection of a homo…
We consider axisymmetric Boussinesq convection in a shallow cylinder radius, L, and depth, H (<< L), which rotates with angular velocity $Ω$ about its axis of symmetry aligned to the vertical. Constant heat flux boundary conditions, top and bottom, are adopted, for which the onset of instability occurs on a long horizontal length scale provided that $Ω$ is sufficiently small. We investigate the nonlinear development by well-established two-scale asymptotic expansion methods. Comparisons of the results with the direct numerical simulations (DNS) of the primitive governing equations are good at …
We have developed novel instrumentation for making Lagrangian measurements of temperature in diverse fluid flows. A small neutrally buoyant capsule is equipped with on-board electronics which measure temperature and transmit the data via a wireless radio frequency link to a desktop computer. The device has 80 dB dynamic range, resolving milli-Kelvin changes in temperature with up to 100 ms sampling time. The capabilities of these "smart particles" are demonstrated in turbulent thermal convection in water. We measure temperature variations as the particle is advected by the convective motion, a…
A challenge in fundamental physics and especially in thermodynamics is to understand emergent order in far-from-equilibrium systems. While at equilibrium, temperature plays the role of a key thermodynamic variable whose uniformity in space and time defines the equilibrium state the system is in, this is not the case in a far-from-equilibrium driven system. When energy flows through a finite system at steady-state, temperature takes on a time-independent but spatially varying character. In this study, the convection patterns of a Rayleigh-B{é}nard fluid cell at steady-state is used as a prototy…
The performances of the Color-Gradient (CG) and of the Shan-Chen (SC) multicomponent Lattice Boltzmann models are quantitatively compared side-by-side on multiple physical flow problems where breakup, coalescence and contraction of fluid ligaments are important. The flow problems are relevant to microfluidic applications, jetting of microdroplets as seen in inkjet printing, as well as emulsion dynamics. A significantly wider range of parameters is shown to be accessible for CG in terms of density-ratio, viscosity-ratio and surface tension values. Numerical stability for a high density ratio $\…
