The extreme or maximum age of information (AoI) is analytically studied for wireless communication systems. In particular, a wireless powered single-antenna source node and a receiver (connected to the power grid) equipped with multiple antennas are considered when operated under independent Rayleigh-faded channels. Via the extreme value theory and its corresponding statistical features, we demonstrate that the extreme AoI converges to the Gumbel distribution whereas its corresponding parameters are obtained in straightforward closed-form expressions. Capitalizing on this result, the risk of the extreme AoI realization is analytically evaluated according to some relevant performance metrics, while some useful engineering insights are manifested.
Radio frequency (RF) energy transfer and harvesting has been intensively studied recently as a promising approach to significantly extend the lifetime of energy-constrained wireless networks. This technique has a great potential to provide relatively stable and continuous RF energy to devices wirelessly; it thus opened a new research paradigm, termed wireless-powered communication (WPC), which has raised many new research opportunities with wide applications. Among these, the design and analysis of cooperative schemes towards efficient WPC have attracted tremendous research interests nowadays.…
In this letter, a novel wireless powered protocol is proposed to maximize the system throughput of an energy harvesting (EH) based cognitive radio network, while satisfying a minimum primary user rate requirement. For EH, we exploit both dedicated wireless power transfer from primary base station as well as ambient ones available due to wireless information transfer among primary and secondary users. Specifically, we prove convexity of the optimization problem and obtain semi-closed-form for globally optimal solution. Numerical results validate the analysis, and show an average performance imp…
Non-orthogonal multiple access (NOMA) and the cooperative relaying systems are two of the promising techniques to meet requirements of future wireless networks such as high spectral efficiency and wide coverage area. On the other hand, the energy efficiency has also high priority in the applications with limited energy such as sensor networks and/or internet of things (IoTs). To this end, in this paper, we propose wireless powered cooperative relaying system with NOMA thereby increasing spectral and energy efficiency. We consider three different energy harvesting (EH) protocols (i.e., power sh…
Wireless powered backscatter communications is an attractive technology for next-generation low-powered sensor networks such as the Internet of Things. However, backscattering suffers from collisions due to multiple simultaneous transmissions and a dyadic backscatter channel, which greatly attenuate the received signal at the reader. This letter deals with backscatter communications in sensor networks from a large-scale point-of-view and considers various collision resolution techniques: directional antennas, ultra-narrow band transmissions and successive interference cancellation. We derive a…
This letter studies a multi-antenna wireless powered communication (WPC) system with co-channel energy and information transfer, where a wireless device (WD), powered up by wireless energy transfer (WET) from an energy transmitter (ET), communicates to an information receiver (IR) over the same frequency band. We maximize the achievable data rate from the WD to the IR by jointly optimizing the energy beamforming at the ET and the information beamforming at the WD, subject to their individual transmit power constraints. We obtain the optimal solution to this problem in closed-form, where the op…
This paper studies multi-agent deep reinforcement learning (MADRL) based resource allocation methods for multi-cell wireless powered communication networks (WPCNs) where multiple hybrid access points (H-APs) wirelessly charge energy-limited users to collect data from them. We design a distributed reinforcement learning strategy where H-APs individually determine time and power allocation variables. Unlike traditional centralized optimization algorithms which require global information collected at a central unit, the proposed MADRL technique models an H-AP as an agent producing its action base…
Wireless-powered communications will entail short packets due to naturally small payloads, low latency requirements and/or insufficient energy resources to support longer transmissions. In this paper, a wireless-powered communication system is investigated where an energy harvesting transmitter, charged by a power beacon via wireless energy transfer, attempts to communicate with a receiver over a noisy channel. Leveraging the framework of finite-length information theory, the system performance is analyzed using metrics such as the energy supply probability at the transmitter, and the achievab…
This paper maximizes the achievable throughput of a relay-assisted wirelessly powered communications system, where an energy constrained source, helped by an energy constrained relay and both powered by a dedicated power beacon (PB), communicates with a destination. Considering the time splitting approach, the source and relay first harvest energy from the PB, which is equipped with multiple antennas, and then transmits information to the destination. Simple closed-form expressions are derived for the optimal PB energy beamforming vector and time split for energy harvesting and information tra…
In this paper, we provide a comprehensive system model of a wireless-powered sensor network (WPSN) based on experimental results on a real-life testbed. In the WPSN, a sensor node is wirelessly powered by the RF energy transfer from a dedicated RF power source. We define the behavior of each component comprising the WPSN and analyze the interaction between these components to set up a realistic WPSN model from the systematic point of view. Towards this, we implement a real-life and full-fledged testbed for the WPSN and conduct extensive experiments to obtain model parameters and to validate th…
In this paper, we compare two common modes of duplexing in wireless powered communication networks (WPCN); namely TDD and FDD. So far, TDD has been the most widely used duplexing technique due to its simplicity. Yet, TDD does not allow the energy transmitter to function continuously, which means to deliver the same amount of energy as that in FDD, the transmitter has to have a higher maximum transmit power. On the other hand, when regulations for power spectral density limits are not restrictive, using FDD may lead to higher throughput than that of TDD by allocating less bandwidth to energy an…
The performance of wireless communication is fundamentally constrained by the limited battery life of wireless devices, whose operations are frequently disrupted due to the need of manual battery replacement/recharging. The recent advance in radio frequency (RF) enabled wireless energy transfer (WET) technology provides an attractive solution named wireless powered communication (WPC), where the wireless devices are powered by dedicated wireless power transmitters to provide continuous and stable microwave energy over the air. As a key enabling technology for truly perpetual communications, WP…
Integrating mobile edge computing (MEC) and wireless power transfer (WPT) has been regarded as a promising technique to improve computation capabilities for self-sustainable Internet of Things (IoT) devices. This paper investigates a wireless powered multiuser MEC system, where a multi-antenna access point (AP) (integrated with an MEC server) broadcasts wireless power to charge multiple users for mobile computing. We consider a time-division multiple access (TDMA) protocol for multiuser computation offloading. Under this setup, we aim to maximize the weighted sum of the computation rates (in t…
This work considers the design of online transmission policy in a wireless-powered communication system with a given energy budget. The system design objective is to maximize the long-term throughput of the system exploiting the energy storage capability at the wireless-powered node. We formulate the design problem as a constrained Markov decision process (CMDP) problem and obtain the optimal policy of transmit power and time allocation in each fading block via the Lagrangian approach. To investigate the system performance in different scenarios, numerical simulations are conducted with variou…
We consider a full-duplex decode-and-forward system, where the wirelessly powered relay employs the time-switching protocol to receive power from the source and then transmit information to the destination. It is assumed that the relay node is equipped with two sets of antennas to enable full-duplex communications. Three different interference mitigation schemes are studied, namely, 1) optimal 2) zero-forcing and 3) maximum ratio combining/maximum ratio transmission. We develop new outage probability expressions to investigate delay-constrained transmission throughput of these schemes. Our ana…
This paper investigates a wireless-powered cooperative communication network consisting of a source, a destination and a multi-antenna decode-and-forward relay. We consider the relay as a wireless-powered node that has no external power supply; but it is equipped with an energy harvesting (EH) unit and a rechargeable battery such that it can harvest and accumulate energy from radio-frequency signals broadcast by the source. By fully incorporating the EH feature of the relay, we develop an opportunistic relaying protocol, termed accumulate-then-forward (ATF), for the considered WPCCN. We then a…
In this paper, we study wireless networks where nodes have two energy sources, namely a battery and radio frequency (RF) energy harvesting circuitry. We formulate two optimization problems with different objective functions, namely maximizing the sum throughput and maximizing the minimum throughput, for enhanced fairness. Furthermore, we show the generality of the proposed system model through characterizing the conditions under which the two formulated optimization problems can be reduced to the corresponding problems of different known wireless networks, namely, conventional wireless network…
In this work, we maximize the secrecy rate of the wireless-powered untrusted relay network by jointly designing power splitting (PS) ratio and relay beamforming with the proposed global optimal algorithm (GOA) and local optimal algorithm (LOA). Different from the literature, artificial noise (AN) sent by the destination not only degrades the channel condition of the eavesdropper to improve the secrecy rate, but also becomes a new source of energy powering the untrusted relay based on PS. Hence, it is of high economic benefits and efficiency to take advantage of AN compared with the literature.…
RF energy harvesting is a promising potential solution to provide convenient and perpetual energy supplies to low-power wireless sensor networks. In this paper, we investigate the energy harvesting performance of a wireless sensor node powered by harvesting RF energy from existing multiuser MIMO system. Specifically, we propose a random unitary beamforming (RUB) based cooperative beam selection scheme to enhance the energy harvesting performance at the sensor. Under a constant total transmission power constraint, the multiuser MIMO system tries to select a maximal number of active beams for da…
The impact of imperfect channel state (CSI) information in an energy harvesting (EH) cooperative non-orthogonal multiple access (NOMA) network, consisting of a source, two users, and an EH relay is investigated in this paper. The relay is not equipped with a fixed power source and acts as a wireless powered node to help signal transmission to the users. Closed-form expressions for the outage probability of both users are derived under imperfect CSI for two different power allocation strategies namely fixed and dynamic power allocation. Monte Carlo simulations are used to numerically evaluate t…
This paper considers wireless-powered cooperative jamming (CJ) to secure communication between a transmitter (Tx) and an information receiver (IR), in the presence of an energy receiver (ER) which is termed as a potential eavesdropper. The full-duplex jammer harvests energy from the Tx's information signal and transmits jamming signal at the same time, where the jamming signal not only confounds the ER (potential eavesdropper) but also charges the ER. Our goal is to maximize the secrecy information rate by jointly optimizing the power allocation at the Tx and jammer while maintaining the harve…
To overcome the limited coverage in traditional wireless sensor networks, \emph{mobile crowd sensing} (MCS) has emerged as a new sensing paradigm. To achieve longer battery lives of user devices and incentive human involvement, this paper presents a novel approach that seamlessly integrates MCS with wireless power transfer, called \emph{wirelessly powered crowd sensing} (WPCS), for supporting crowd sensing with energy consumption and offering rewards as incentives. The optimization problem is formulated to simultaneously maximize the data utility and minimize the energy consumption for service…
This paper investigates a wireless powered communication network (WPCN) under the protocol of harvest-then-transmit,where a hybrid access point with constant power supply replenishes the passive user nodes by wireless power transfer in the downlink,then each user node transmit independent information to the hybrid AP in a time division multiple access (TDMA) scheme in the uplink.The sum-throughput maximization and min-throughput maximization problems are considered in this paper.The optimal time allocation for the sum-throughput maximization is proposed based on the Jensen's inequality,which p…
The physical-layer security issue in the multiple non-regenerative wireless-powered relay (WPR) networks is investigated in this letter, where the idle relay is treated as a potential eavesdropper. To guarantee secure communication, the destination-based artificial noise is sent to degrade the receptions of eavesdroppers, and it also becomes a new source of energy powering relays to forward the information with power splitting (PS) technique. We propose an efficient algorithm ground on block-wise penalty function method to jointly optimize PS ratio and beamforming to maximize the secrecy rate.…
This paper studies a relay-assisted wireless powered communication network (R-WPCN) consisting of multiple source-destination pairs and a hybrid relay node (HRN). We consider a "charge-then-forward" protocol at the HRN, in which the HRN with constant energy supply first acts as an energy transmitter to charge the sources, and then forwards the information from the sources to their destinations through time division multiple access (TDMA) or frequency division multiple access (FDMA). Processing costs at the wireless-powered sources are taken into account. Our goal is to maximize the sum-rate of…
This paper studies user cooperation in the emerging wireless powered communication network (WPCN) for throughput optimization. For the purpose of exposition, we consider a two-user WPCN, in which one hybrid access point (H-AP) broadcasts wireless energy to two distributed users in the downlink (DL) and the users transmit their independent information using their individually harvested energy to the H-AP in the uplink (UL) through time-division-multiple-access (TDMA). We propose user cooperation in the WPCN where the user which is nearer to the H-AP and has a better channel for DL energy harves…
In this paper, we consider the sum $α$-fair utility maximization problem for joint downlink (DL) and uplink (UL) transmissions of a wireless powered communication network (WPCN) via time and power allocation. In the DL, the users with energy harvesting receiver architecture decode information and harvest energy based on simultaneous wireless information and power transfer. While in the UL, the users utilize the harvested energy for information transmission, and harvest energy when other users transmit UL information. We show that the general sum $α$-fair utility maximization problem can be tra…
Intelligent reflecting surface (IRS) has recently been emerged as an effective way for improving the performance of wireless networks by reconfiguring the propagation environment through a large number of passive reflecting elements. This game-changing technology is especially important for stepping into the Internet of Everything (IoE) era, where high performance is demanded with very limited available resources. In this paper, we study a backscatter-assisted wireless powered communication network (BS-WPCN), in which a number of energy-constrained users, powered by a power station (PS), trans…
We analyze a wireless communication system with finite block length and finite battery energy, under quasi-static Nakagami-m fading. Wireless energy transfer is carried out in the downlink while information transfer occurs in the uplink. Transmission strategies for scenarios with/without energy accumulation between transmission rounds are characterized in terms of error probability and energy consumption. A power control protocol for the energy accumulation scenario is proposed and results show the enormous impact on improving the system performance, in terms of error probability and energy co…
This paper considers a single-antenna wirelesspowered communication network (WPCN) over a flat-fading channel. We show that, by using our probabilistic harvestand-transmit (PHAT) strategy, which requires the knowledge of instantaneous full channel state information (CSI) and fading probability distribution, the ergodic throughput of this system may be greatly increased relative to that achieved by the harvestthen-transmit (HTT) protocol. To do so, instead of dividing every frame to the uplink (UL) and downlink (DL), the channel is allocated to the UL wireless information transmission (WIT) and…
In this letter, we consider a wireless-powered backscatter communication (WP-BackCom) network, where the transmitter first harvests energy from a dedicated energy RF source in the sleep state, and then backscatters information and harvests energy simultaneously through a reflection coefficient. Our goal is to maximize the achievable energy efficiency of the WP-BackCom network via jointly optimizing time allocation, reflection coefficient and transmit power of the dedicated energy RF source. The optimization problem is non-convex and challenging to solve. We develop an efficient Dinkelbach-base…
This letter deals with the opportunistic beamforming (OBF) scheme for multi-antenna downlink with spatial randomness. In contrast to conventional OBF, the terminals return only 1-bit feedback, which is powered by wireless power transfer through a rectenna array. We study two fundamental topologies for the combination of the rectenna elements; the direct-current combiner and the radio-frequency combiner. The beam outage probability is derived in closed form for both combination schemes, by using high order statistics and stochastic geometry.
In this correspondence, we consider an amplify-and-forward relay network in which relayed information is overheard by an eavesdropper. In order to confound the eavesdropper, a wireless-powered jammer is also considered which harvests energy from a multiple-antenna source. We proposed a new secure beamforming scheme in which beamforming vector is a linear combination of the energy beamforming (EB) and information beamforming (IB) vectors. We also present a new closed-form solution for the proposed beamforming vector which is shown to achieve a higher secrecy rate as compared to the trivial EB a…
We study transmission delay minimization of a wireless powered communication (WPC) system in a point-to-point scenario with one hybrid access point (HAP) and one WPC node. In this type of communications, the HAP sends energy to the node at the downlink (DL) for a given time duration and the WPC node harvests enough radio frequency (RF) power. Then, at the uplink (UL) channel, the WPC node transmits its collected data in a given time duration to the HAP. Minimizing such round trip delay is our concern here. So, we have defined four optimization problems to minimize this delay by applying the op…
Wireless charging is a promising way to power wireless nodes' transmissions. This paper considers new dual-function access points (APs) which are able to support the energy/information transmission to/from wireless nodes. We focus on a large-scale wireless powered communication network (WPCN), and use stochastic geometry to analyze the wireless nodes' performance tradeoff between energy harvesting and information transmission. We study two cases with battery-free and battery-deployed wireless nodes. For both cases, we consider a harvest-then-transmit protocol by partitioning each time frame in…
This paper investigates a multi-input single-output (MISO) wireless powered communication network (WPCN) under the protocol of harvest-then-transmit. The power station (PS) with reliable power supply can replenish the passive user nodes by wireless power transfer (WPT) in the downlink (DL), then each user node transmits independent information to the sink by a time division multiple access (TDMA) scheme in the uplink (UL). We consider the joint time allocation and beamforming design to maximize the system sum-throughput. The semidefinite relaxation (SDR) technique is applied to solve the nonco…
In this paper, we consider a wireless powered multi-relay network in which a multi-antenna hybrid access point underlaying a cellular system transmits information to distant receivers. Multiple relays capable of energy harvesting are deployed in the network to assist the information transmission. The hybrid access point can wirelessly supply energy to the relays, achieving multi-user gains from signal and energy cooperation. We propose a joint optimization for signal beamforming of the hybrid access point as well as wireless energy harvesting and collaborative beamforming strategies of the rel…
In this paper, a two-hop decode-and-forward cognitive radio system with deployed interference alignment is considered. The relay node is energy-constrained and scavenges the energy from the interference signals. In the literature, there are two main energy harvesting protocols, namely, time-switching relaying and power-splitting relaying. We first demonstrate how to design the beamforming matrices for the considered primary and secondary networks. Then, the system capacity under perfect and imperfect channel state information scenarios, considering different portions of time-switching and powe…
In this paper, we consider a multiple-input multiple-output wireless powered communication network (MIMO-WPCN), where multiple users harvest energy from a dedicated power station in order to be able to transmit their information signals to an information receiving station. Employing a practical non-linear energy harvesting (EH) model, we propose a joint time allocation and power control scheme, which takes into account the uncertainty regarding the channel state information (CSI) and provides robustness against imperfect CSI knowledge. In particular, we formulate two non-convex optimization pr…
In this paper, we consider a frequency-division duplexing (FDD) multiple-user multiple-input-single-output (MU-MISO) wireless-powered communication network (WPCN) consisting of one hybrid data-and-energy access point (HAP) with multiple antennas which coordinates energy/information transfer to/from several single-antenna wireless devices (WD). Typically, in such a system, wireless energy transfer (WET) requires such techniques as energy beamforming (EB) for efficient transfer of energy to the WDs. Yet, efficient EB can only be accomplished if channel state information (CSI) is available to the…
Massive MIMO is attractive for wireless information and energy transfer due to its ability to focus energy towards desired spatial locations. In this paper, the overall power transfer efficiency (PTE) and the energy efficiency (EE) of a wireless-powered massive MIMO system is investigated where a multi-antenna base-station (BS) uses wireless energy transfer to charge single-antenna energy harvesting users on the downlink. The users may exploit the harvested energy to transmit information to the BS on the uplink. The overall system performance is analyzed while accounting for the nonlinear natu…
In this paper, we consider a wireless-powered cooperative communication network, which consists of a hybrid access-point (AP), a hybrid relay, and an information source. In contrast to the conventional cooperative networks, the source in the considered network is assumed to have no embedded energy supply. Thus, it first needs to harvest energy from the signals broadcast by the AP and/or relay, which have constant power supply, in the downlink (DL) before transmitting the information to the AP in the uplink (UL). The hybrid relay can not only help to forward information in the UL but also charg…
This paper studies the outage probability and the throughput of amplify-and-forward relay networks with wireless information and energy transfer. We use some recent results on finite block-length codes to analyze the system performance in the cases with short codewords. Specifically, the time switching relaying and the power splitting relaying protocols are considered for energy and information transfer. We derive tight approximations for the outage probability/throughput. Then, we analyze the outage probability in asymptotically high signal-to-noise ratios. Finally, we use numerical results t…
In this paper, we consider a wireless powered mobile edge computing (MEC) network, where the distributed energy-harvesting wireless devices (WDs) are powered by means of radio frequency (RF) wireless power transfer (WPT). In particular, the WDs follow a binary computation offloading policy, i.e., data set of a computing task has to be executed as a whole either locally or remotely at the MEC server via task offloading. We are interested in maximizing the (weighted) sum computation rate of all the WDs in the network by jointly optimizing the individual computing mode selection (i.e., local comp…
This paper studies optimal resource allocation in the wireless-powered communication network (WPCN), where one hybrid access-point (H-AP) operating in full-duplex (FD) broadcasts wireless energy to a set of distributed users in the downlink (DL) and at the same time receives independent information from the users via time-division-multiple-access (TDMA) in the uplink (UL). We design an efficient protocol to support simultaneous wireless energy transfer (WET) in the DL and wireless information transmission (WIT) in the UL for the proposed FD-WPCN. We jointly optimize the time allocations to the…
Wireless powered sensor networks (WPSNs) have emerged as a key development towards the future self-sustainable Internet of Things (IoT) networks. To achieve a good balance between self-sustainability and reliability, partially WPSNs with a mixed power solution are desirable for practical applications. Specifically, most of the sensor nodes are wireless powered but the key sensor node adopts traditional wire/battery power for reliability. As a result, this paper mainly investigates optimal design for the partially WPSNs in which simultaneous wireless information and power transfer (SWIPT) is ad…
This paper characterizes the structure of the Age of Information (AoI)-optimal policy in wireless powered communication systems while accounting for the time and energy costs of generating status updates at the source nodes. In particular, for a single source-destination pair in which a radio frequency (RF)-powered source sends status updates about some physical process to a destination node, we minimize the long-term average AoI at the destination node. The problem is modeled as an average cost Markov Decision Process (MDP) in which, the generation times of status updates at the source, the t…
In this paper, we investigate a multi-node multi-antenna wireless-powered sensor networks (WPSN) comprised of one power beacon and multiple sensor nodes. We have implemented a real-life multi-node multi-antenna WPSN testbed that operates in real time. We propose a beam-splitting beamforming technique that enables a power beacon to split microwave energy beams towards multiple nodes for simultaneous charging. We experimentally demonstrate that the beam-splitting beamforming technique achieves the Pareto optimality. For a perpetual operation of the sensor nodes, we adopt an energy neutral contro…
This paper studies a wireless powered mobile edge computing (MEC) system, where a dedicated energy transmitter (ET) uses the radio-frequency (RF) signal enabled wireless power transfer (WPT) to charge wireless devices for sustainable computation. In such a system, we present a new user cooperation approach to improve the computation performance of active devices, in which surrounding idle devices are enabled as helpers to use their opportunistically harvested wireless energy from the ET to help remotely execute active users' computation tasks. In particular, we consider a basic scenario with o…
This paper studies a two-hop decode-and-forward underlay cognitive radio system with interference alignment technique. An energy-constrained relay node harvests the energy from the interference signals through a power-splitting (PS) relaying protocol. Firstly, the beamforming matrices design for the primary and secondary networks is demonstrated. Then, a bit error rate (BER) performance of the system under perfect and imperfect channel state information (CSI) scenarios for PS protocol is calculated. Finally, the impact of the CSI mismatch parameters on the BER performance is simulated.
Wirelessly powered communications will entail short packets due to naturally small payloads, low-latency requirements and/or insufficient energy resources to support longer transmissions. In this paper, a wirelessly powered communication system is investigated where an energy harvesting transmitter, charged by one or more power beacons via wireless energy transfer, attempts to communicate with a receiver over a noisy channel. Under a save-then-transmit protocol, the system performance is characterized using metrics such as the energy supply probability at the transmitter, and the achievable ra…
Assuming non-ideal circuit power consumption at the energy harvesting (EH) nodes, we propose two practical protocols that optimize the performance of the harvest-then-transmit wireless powered communication networks (WPCNs) under two different objectives: (1) proportional fair (PF) resource allocation, and (2) sum rate maximization. These objectives lead to optimal allocations for the transmit power by the base station (BS), which broadcasts RF radiation over the downlink, and optimal durations of the EH phase and the uplink information transmission phases within the dynamic time-division mult…
The recent advance in radio-frequency (RF) wireless energy transfer (WET) has motivated the study of wireless powered communication network (WPCN), in which distributed wireless devices are powered via dedicated WET by the hybrid access-point (H-AP) in the downlink (DL) for uplink (UL) wireless information transmission (WIT). In this paper, by exploiting the cognitive radio (CR) technique, we study a new type of CR enabled secondary WPCN, called cognitive WPCN, under spectrum sharing with the primary wireless communication system. In particular, we consider a cognitive WPCN, consisting of one …
In a wirelessly-powered communication network (WPCN), an energy access point (E-AP) supplies the energy needs of the network nodes through radio frequency wave transmission, and the nodes store their received energy in their batteries for possible data transmission. In this paper, we propose an online control policy for energy transfer from the E-AP to the wireless nodes and for data transfer among the nodes. With our proposed control policy, all data queues of the nodes are stable, while the average energy consumption of the network is shown to be within a bounded gap of the minimum energy re…
In this paper, we study the average throughput performance of energy beamforming in a multi-antenna wireless-powered communication network (WPCN). The considered network consists of one hybrid access-point (AP) with multiple antennas and a single antenna user. The user does not have constant power supply and thus needs to harvest energy from the signals broadcast by the AP in the downlink (DL), before sending its data back to the AP with the harvested energy in the uplink (UL). We derive closed-form expressions of the average throughput and their asymptotic expressions at high SNR for both del…
Age of information (AoI), a metric to analyse data freshness, is of interest for time-critical applications in upcoming wireless networks. Besides, wireless power transfer (WPT) is also essential to prolong lifetime of a wireless sensor network. Thus, we study a flat-fading wireless powered cooperative network, wherein a source and a relay charge their finite-sized capacitors by harvesting energy from a remote power station. For two conventional decode-and-forward (DF) and amplify-and-forward (AF) relaying, average AoI and peak AoI (PAoI) are studied to show how the randomness of the data/powe…
We propose techniques for optimizing transmit beamforming in a full-duplex multiple-input-multiple-output (MIMO) wireless-powered communication system, which consists of two phases. In the first phase, the wireless-powered mobile station (MS) harvests energy using signals from the base station (BS), whereas in the second phase, both MS and BS communicate to each other in a full-duplex mode. When complete instantaneous channel state information (CSI) is available, the BS beamformer and the time-splitting (TS) parameter of energy harvesting are jointly optimized in order to obtain the BS-MS rate…
We consider the wireless powered communications where users harvest energy from non-dedicated sources. The user follows a harvest-then-transmit protocol: in first phase of a slot time the source node harvests energy from a nearby conventional Access Point, then transmit information to its destination node or relay node in the second phase. We obtain the optimal\textit{ harvesting ratio} to maximize the expected throughput for direct transmission (DT )and decode forward (DF) relay under outage constraint, respectively. Our results reveal that the optimal harvest ratio for DT is dominated by the…
Wireless power transfer and backscatter communications have emerged as promising solutions for energizing and communicating with power limited devices. Despite some progress in wirelessly powered backscatter communications, the focus has been concentrated on backscatter and energy harvester. Recently, significant progress has been made on the design of transmit multisine waveform, adaptive to the Channel State Information at the transmitter (CSIT), in point-to-point backscatter system. In this paper, we leverage the work and study the design of transmit multisine waveform in a multiuser backsc…
