用于柔性配电系统互联的采用馈线双端开关的混合多端软开点的设计和操作
Design and Operation of Hybrid Multi-Terminal Soft Open Points using Feeder Selector Switches for Flexible Distribution System Interconnection
摘要:
配电系统将需要新的具有成本效益的解决方案,以提供网络容量和更大的灵活性,以适应低碳技术。为了满足这一需求,我们提出了混合多终端软开放点(混合MT-SOP),以有效地提供配电系统互联能力。混合MT-SOP的每个支路都有一个AC/DC转换器,与一组AC开关(馈电线开关)串联连接,以允许转换器连接到节点处的任何馈电线。不对称转换器的大小,以增加可行的功率传输高达50%,在三端的情况下,而一个圆锥混合整数规划制定最佳选择的设备配置和功率传输。案例研究表明,与同等大小的MT-SOP相比,混合MT-SOP将转换器的利用率提高了三分之一以上,系统损耗降低了13%。
英文摘要:
Distribution systems will require new cost-effective solutions to provide network capacity and increased flexibility to accommodate Low Carbon Technologies. To address this need, we propose the Hybrid Multi-Terminal Soft Open Point (Hybrid MT-SOP) to efficiently provide distribution system interconnection capacity. Each leg of the Hybrid MT-SOP has an AC/DC converter connected in series with a bank of AC switches (Feeder Selector Switches) to allow the converter to connect to any of the feeders at a node. Asymmetric converter sizing is shown to increase feasible power transfers by up to 50% in the three-terminal case, whilst a conic mixed-integer program is formulated to optimally select the device configuration and power transfers. A case study shows the Hybrid MT-SOP increasing utilization of the converters by more than one third, with a 13% increase in system loss reduction as compared to an equally-sized MT-SOP.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。