arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2201.04971physics.flu-dyn
收藏

在kHz-rates用磷光测温法精确测量表面温度以研究狭窄通道内火焰-壁面相互作用

Precise surface temperature measurements at kHz-rates using phosphor thermometry to study flame-wall interactions in narrow passages

Anthony O. Ojo, David Escofet-Martin, Christopher Abram, Benoit Fond, Brian Peterson

摘要:

热成像磷光体ScVO 4:Bi 3+用于获得时间分辨的表面温度测量,精度为5 kHz。测量被用来研究瞬态热损失和火焰壁相互作用(FWI)内的专用狭窄的两壁通道(缝隙)在一个光学可访问的固定体积室。本文模拟了许多技术环境中的裂缝,由于缺乏详细的测量,FWI不太了解。化学发光(CH*)成像与荧光测温同时进行,以解决时空火焰的功能如何影响局部表面温度。ScVO 4:Bi 3+以Gd 3Ga 5 O 12:Cr,Ce为基准,Gd 3Ga 5 O 12:Cr,Ce是一种在FWI环境中以低kHz速率使用的常见磷光体。ScVO 4:Bi 3+显示出提供更高的发光信号水平和温度灵敏度以及对激发激光能量密度的可忽略的交叉依赖性,提高了壁温测量的精度和可重复性。ScVO 4:Bi 3+进一步用于解决裂缝间距变化的瞬态热损失,并独特地捕获与火焰动力学相关的温度瞬变。利用这些精确的表面温度测量值,计算出壁面热通量,缝隙间距为1.2 mm,火焰熄灭是普遍的。壁热通量和估计淬火距离报告的火焰,积极燃烧或熄灭在测量位置。

英文摘要:

The thermographic phosphor ScVO4:Bi3+ is used to obtain time-resolved surface temperature measurements with sub-oC precision at 5 kHz. Measurements are used to study transient heat loss and flame-wall interactions (FWI) within a dedicated narrow two-wall passage (crevice) in an optically accessible fixed volume chamber. This passage emulates a crevice relevant in many technical environments, where FWI is less understood due to lack of detailed measurements. Chemiluminescence (CH*) imaging is performed simultaneously with phosphor thermometry to resolve how the spatiotemporal flame features influence the local surface temperature. ScVO4:Bi3+ is benchmarked against Gd3Ga5O12:Cr,Ce, a common phosphor used at low-kHz rates in FWI environments. ScVO4:Bi3+ is shown to offer higher luminescence signal levels and temperature sensitivity as well as negligible cross dependence on the excitation laser fluence, improving the precision and repeatability of the wall temperature measurement. ScVO4:Bi3+ is further used to resolve transient heat loss for variations in crevice spacing and uniquely capture temperature transients associated with flame dynamics. Taking advantage of these precise surface temperature measurements the wall heat flux is calculated with crevice spacing of 1.2 mm, where flame extinction is prevalent. Wall heat flux and estimated quenching distance are reported for flames that actively burn or extinguish at the measurement location.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑