arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2108.08213physics.flu-dyn
收藏

用HRCARS和磷光体测温法对发动机瞬态过程的热边界层和相关热损失的试验研究

Experimental investigation of thermal boundary layers and associated heat loss for transient engine-relevant processes using HRCARS and phosphor thermometry

Anthony O. Ojo, David Escofet-Martin, Joshua Collins, Gabriele Falconetti, Brian Peterson

摘要:

设计高效的小型活塞发动机需要了解瞬态壁热损失。测量的空间和时间演变的热边界层(TBL),需要促进这方面的知识。这项工作利用混合fs/ps的旋转相干反斯托克斯拉曼光谱(HRCARS)来测量单发,壁正常的气体温度,这提供了独家访问的TBL。荧光测温法用于测量壁温。实验是在一个固定体积的腔室中进行的,该腔室以瞬态压力上升/下降来模拟发动机相关的压缩/膨胀事件。这种简化的环境有利于与发动机相关过程相关的基础BL研究。TBL的发展和相应的热损失在两个发动机相关的制度:(1)未燃烧的气体制度,包括气体压缩和(2)燃烧气体制度,其中包括高温压缩/膨胀过程。在这些制度的时间历史的重要BL量,如气体/壁温,TBL厚度,壁热通量,和相对能量损失在墙上的评价。在轻度压缩过程中,Tcore增加30 K,在δT ~ 200 μm处开始TBL。壁热通量保持低于6千瓦/平方米,但对应于~6%的能量损失每毫秒。在燃烧气体制度,Tcore类似于绝热火焰温度,而Twall增加了16 K。当δT从290 μm增加到730 μm时,TBL迅速发展。在火焰冲击后,能量损失超过25%,在膨胀结束时缓慢衰减到~10%。测量还解决了膨胀过程中新鲜气体和燃烧气体的热混合,这在TBL中产生强烈的温度反转。调查结果进行了比较,规范的环境和发动机相关的过程中表现出的瞬态TBL的性质。

英文摘要:

Design of efficient, downsized piston engines requires an understanding of transient wall heat losses. Measurements of the spatially and temporally evolving thermal boundary layer (TBL) are required to facilitate this knowledge. This work takes advantage of hybrid fs/ps rotational coherent anti-Stokes Raman spectroscopy (HRCARS) to measure single-shot, wall-normal gas temperatures, which provide exclusive access to the TBL. Phosphor thermometry is used to measure wall temperature. Experiments are performed in a fixed-volume chamber that operates with a transient pressure rise/decay to simulate engine-relevant compression/expansion events. This simplified environment is conducive for fundamental BL studies associated with engine-relevant processes. The TBL development and corresponding heat losses are evaluated within two engine-relevant regimes: (1) an unburned-gas regime comprised of gaseous compression and (2) a burned-gas regime, which includes high-temperature compression/expansion processes. The time-history of important BL quantities such as gas / wall temperatures, TBL thickness, wall heat flux, and relative energy lost at the wall are evaluated in these regimes. During the mild compression, Tcore increases by 30K and a TBL is initiated with δT ~ 200 μm. Wall heat fluxes remain below 6 kW/m2, but corresponds to ~6% energy loss per ms. In the burned-gas regime, Tcore resembles adiabatic flame temperatures, while Twall increases by 16K. A TBL rapidly develops as δT increases from 290-730 μm. Energy losses in excess of 25% occur after flame impingement and slowly decay to ~10% at the end of expansion. Measurements also resolve thermal mixing of fresh- and burned gases during expansion, which yield strong temperature reversals in the TBL. Findings are compared to canonical environments and demonstrate the transient TBL nature during engine-relevant processes.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑