The idea of exploiting the Wi-Fi bursts as the medium for sensing purposes, particularly for the human targets in the indoor environment, was cultivated in both radar and computer science communities and it has became a noticeable research genre with cross-disciplinary impact in security, healthcare, human-machine interaction etc.This article comparatively introduces passive radar based and channel state information (CSI) based approaches. For each means, the primary design principles, signal processing and representative applications scenarios are shown. At last, some opportunities and challenges of Wi-Fi sensing are pointed out for the sake of stepping closer to the practitioners and end-users.
Intelligent reflecting surface (IRS) is a promising technology being considered for future wireless communications due to its ability to control signal propagation. This paper considers the joint active and passive beamforming problem for an IRS-assisted radar, where multiple IRSs are deployed to assist the surveillance of multiple targets in cluttered environments. Specifically, we aim to maximize the minimum target illumination power at multiple target locations by jointly optimizing the active beamformer at the radar transmitter and the passive phase-shift matrices at the IRSs, subject to a…
We consider a hybrid active-passive radar system that employs a wireless source as a passive illuminator of opportunity (IO) and a co-channel active radar transmitter operating in the same frequency band to seek spectral efficiency. The hybrid system can take advantage of the strengths of passive radar (e.g., energy efficiency, bi-/multi-static configuration, and spatial diversity) as well as those of active radar (dedicated transmitter, flexible transmit beam steering, waveform optimized for sensing, etc.). To mitigate the mutual interference and location-induced timing uncertainty between th…
In this paper, we study a communication-centric integrated sensing and communication (ISAC) approach, where an access point (AP) communicates with users, while a passive radar (PR) is present in the environment. We investigate the deployment of a reconfigurable intelligent surface (RIS) to enable the PR to localize a target. We derive an optimization problem for updating the phase shifters of the RIS per epoch. Due to the limited information at the PR, such as unknown payload information and unknown number of targets in the scene, we propose two methods capable of performing joint angle of arr…
This work presents a simulation framework to generate human micro-Dopplers in WiFi based passive radar scenarios, wherein we simulate IEEE 802.11g complaint WiFi transmissions using MATLAB's WLAN toolbox and human animation models derived from a marker-based motion capture system. We integrate WiFi transmission signals with the human animation data to generate the micro-Doppler features that incorporate the diversity of human motion characteristics, and the sensor parameters. In this paper, we consider five human activities. We uniformly benchmark the classification performance of multiple mac…
In this paper, we address the problem of target detection in passive multiple-input-multiple-output (MIMO) radar networks. A generalized likelihood ratio test is derived, assuming prior knowledge of the signal format used in the non-cooperative transmit stations. We consider scenarios in which the unknown transmitted signal uses either a linear digital modulation scheme or the Orthogonal Frequency-Division Multiplexing (OFDM) modulation scheme. These digital modulation schemes are used in popular standards including Code-Division Multiple Access (CDMA), Digital Video Broadcasting-Terrestrial (…
Due to its high delay resolution, the ultra-wideband (UWB) technique has been widely adopted for fine-grained indoor localization. Instead of active positioning, UWB radar-based passive human tracking is explored using commercial off-the-shelf (COTS) devices. To extract the time-of-flight (ToF) reflected by the moving person, the accumulated channel impulse responses (CIR) and the corresponding variances are used to train the convolutional neural networks (CNN) model. Particle filter algorithm is adopted to track the moving person based on the extracted ToFs of all pairs of links. Experimental…
We consider a bistatic configuration with a stationary transmitter transmitting unknown waveforms of opportunity and a moving receiver, and present a Deep Learning (DL) framework for passive synthetic aperture radar (SAR) imaging. Existing passive radar methods require two or more antennas which are either spatially separated or colocated with sufficient directivity to estimate the underlying waveform prior to imaging. Our approach to passive radar only requires a single receiver, hence reduces cost and increases versatility. We approach DL from an optimization perspective and formulate image …
We derive the closed form Cramer-Rao bound (CRB) expressions for joint estimation of time delay and Doppler shift with unknown signals with possibly known structure. The results are especially useful for passive radar where direct path and reflected path signals are present. Time delay and Doppler shift estimation is an important fundamental tool in signal processing which has received extensive study for cases with known transmitted signals, but little study for unknown transmitted signals. The presented results generalize previous results for known transmitted signals and show how many looks…
Passive radar has key advantages over its active counterpart in terms of cost and stealth. In this paper, we address passive radar imaging problem by interferometric inversion using a spectral estimation method with a priori information within a deep learning (DL) framework. Cross-correlating the received signals from different look directions mitigates the influence of shared transmitter related phase components despite lack of a cooperative transmitter, and permits tractable inference via interferometric inversion. We thereon leverage deep architectures for modeling a priori information and …
Indoor Positioning Based on Active Radar Sensing and Passive Reflectors: Reflector Placement Optimization
Institute of Signal Processing and System Theory, University of Stuttgart, Stuttgart, Germany（信号处理与系统理论研究所，斯图加特大学，斯图加特，德国）；Munich Research Center, Huawei Technologies Duesseldorf GmbH, Munich, Germany（慕尼黑研究中心，华为技术杜塞尔多夫有限公司，慕尼黑，德国）
Millimeter wave (mmWave) vehicular channels are highly dynamic, and the communication link needs to be reconfigured frequently. In this work, we propose to use a passive radar receiver at the roadside unit to reduce the training overhead of establishing an mmWave communication link. Specifically, the passive radar will tap the transmissions from the automotive radars of the vehicles on the road. The spatial covariance of the received radar signals will be estimated and used to establish the communication link. We propose a simplified radar receiver that does not require the transmitted wavefor…
University of Electronic Science and Technology of China（电子科技大学）；Oklahoma State University（俄克拉荷马州立大学）
Unmanned aerial vehicle (UAV) can provide superior flexibility and cost-efficiency for modern radar imaging systems, which is an ideal platform for advanced remote sensing applications using synthetic aperture radar (SAR) technology. In this paper, an energy-efficient passive UAV radar imaging system using illuminators of opportunity is first proposed and investigated. Equipped with a SAR receiver, the UAV platform passively reuses the backscattered signal of the target scene from an external illuminator, such as SAR satellite, GNSS or ground-based stationary commercial illuminators, and achie…
This paper describes some key ideas and applications of cognitive radars, highlighting the limits and the path forward. Cognitive radars are systems based on the perception-action cycle of cognition that sense the environment, learn from it relevant information about the target and the background, then adapt the radar sensor to optimally satisfy the needs of their mission according to a desired goal. The concept of cognitive radar was introduced originally for active radar only. In this paper we describe how this paradigm can be applied also to passive radar. In particular, we describe (i) cog…
In this paper we build upon recent work in the radio astronomy community to experimentally demonstrate the viability of passive radar for Space Situational Awareness. Furthermore, we show that the six state parameters of objects in orbit may be measured and used to perform orbit characterisation/estimation.
5G promises many new vertical service areas beyond simple communication and data transfer. We propose CPCL (cooperative passive coherent location), a distributed MIMO radar service, which can be offered by mobile radio network operators as a service for public user groups. CPCL comes as an inherent part of the radio network and takes advantage of the most important key features proposed for 5G. It extends the well-known idea of passive radar (also known as passive coherent location, PCL) by introducing cooperative principles. These range from cooperative, synchronous radio signaling, and MAC u…
In this paper, we derive the information theoretic performance bounds on communication data rates and errors in parameter estimation, for a joint radar and communication (JRC) system. We assume that targets are semi-passive, i.e. they use active components for signal reception, and passive components to communicate their own information. Specifically, we let the targets to have control over their passive reflectors in order to transmit their own information back to the radar via reflection-based beamforming or backscattering. We derive the Cramer-Rao lower bounds (CRBs) for the mean squared er…
This paper describes the use of the Murchison Widefield Array, a low-frequency radio telescope at a radio-quiet Western Australian site, as a radar receiver forming part of a continent-spanning multistatic radar network for the surveillance of space. This paper details the system geometry employed, the orbit-specific radar signal processing, and the orbit determination algorithms necessary to ensure resident space objects are detected, tracked, and propagated. Finally, the paper includes the results processed after a short collection campaign utilising several FM radio transmitters across the …
Reconfigurable intelligent surface (RIS) is a promising technology for 6G networks owing to its superior ability to enhance the capacity and coverage of wireless communications by smartly creating a favorable propagation environment. In this paper, we investigate the potential of employing RIS in dual-functional radar-communication (DFRC) systems for improving both radar sensing and communication functionalities. In particular, we consider a RIS-assisted DFRC system in which the multi-antenna base station (BS) simultaneously performs both multi-input multi-output (MIMO) radar sensing and multi…
Intelligent reflecting surface (IRS) technology has recently attracted a significant interest in non-light-of-sight radar remote sensing. Prior works have largely focused on designing single IRS beamformers for this problem. For the first time in the literature, this paper considers multi-IRS-aided multiple-input multiple-output (MIMO) radar and jointly designs the transmit unimodular waveforms and optimal IRS beamformers. To this end, we derive the Cramer-Rao lower bound (CRLB) of target direction-of-arrival (DoA) as a performance metric. Unimodular transmit sequences are the preferred wavefo…
In this paper, we study an intelligent reflecting surface (IRS)-aided radar-communication (Radcom) system, where the IRS is leveraged to help Radcom base station (BS) transmit the joint of communication signals and radar signals for serving communication users and tracking targets simultaneously. The objective of this paper is to minimize the total transmit power at the Radcom BS by jointly optimizing the active beamformers, including communication beamformers and radar beamformers, at the Radcom BS and the phase shifts at the IRS, subject to the minimum signal-to-interference-plus-noise ratio…
The detection and discrimination of quantum states serve a crucial role in quantum signal processing, a discipline that studies methods and techniques to process signals that obey the quantum mechanics frameworks. However, just like classical detection, evasive behaviors also exist in quantum detection. In this paper, we formulate an adversarial quantum detection scenario where the detector is passive and does not know the quantum states have been distorted by an attacker. We compare the performance of a passive detector with the one of a non-adversarial detector to demonstrate how evasive beh…
Integrated sensing and communication (ISAC) is recognized as a promising technology with great potential in saving hardware and spectrum resources, since it simultaneously realizes radar detection and user communication functions in the fully-shared platform. Employing reconfigurable intelligent surface (RIS) in ISAC systems is able to provide a virtual line-of-sight (LoS) path to conquer blockage problem as well as introduce new degrees of freedom (DoFs) to further enhance system performance. Nevertheless, the multiplicative fading effect of passive RIS limits its applications in the absence …
Configuring millimeter wave links following a conventional beam training protocol, as the one proposed in the current cellular standard, introduces a large communication overhead, specially relevant in vehicular systems, where the channels are highly dynamic. In this paper, we propose the use of a passive radar array to sense automotive radar transmissions coming from multiple vehicles on the road, and a radar processing chain that provides information about a reduced set of candidate beams for the links between the road-infrastructure and each one of the vehicles. This prior information can b…
Neuro-Symbolic Fusion of Wi-Fi Sensing Data for Passive Radar with Inter-Modal Knowledge Transfer
Politecnico di Milano（米兰理工大学）；University of Brescia（布雷西亚大学）；DEVCOM Army Research Lab（DEVCOM陆军研究实验室）；University of California, Los Angeles（加州大学洛杉矶分校）；Air Force Research Laboratory（空军研究实验室）
Several Internet-of-Things (IoT) applications provide location-based services, wherein it is critical to obtain accurate position estimates by aggregating information from individual sensors. In the recently proposed narrowband IoT (NB-IoT) standard, which trades off bandwidth to gain wide coverage, the location estimation is compounded by the low sampling rate receivers and limited-capacity links. We address both of these NB-IoT drawbacks in the framework of passive sensing devices that receive signals from the target-of-interest. We consider the limiting case where each node receiver employs…
