Intelligent reflecting surface (IRS) is a promising technology being considered for future wireless communications due to its ability to control signal propagation. This paper considers the joint active and passive beamforming problem for an IRS-assisted radar, where multiple IRSs are deployed to assist the surveillance of multiple targets in cluttered environments. Specifically, we aim to maximize the minimum target illumination power at multiple target locations by jointly optimizing the active beamformer at the radar transmitter and the passive phase-shift matrices at the IRSs, subject to an upperbound on the clutter power at each clutter scatterer. The resulting optimization problem is nonconvex and solved with a sequential optimization procedure along with semedefinite relaxation (SDR). Simulation results show that IRSs can help create effective line-of-sight (LOS) paths and thus substantially improve the radar robustness against target blockage.
An intelligent reflecting surface (IRS) consists of passive reflective elements capable of altering impinging waveforms. The IRS-aided radar systems have recently been shown to improve detection and estimation performance by exploiting the target information collected via non-line-of-sight paths. However, the waveform design problem for an IRS-aided radar has remained relatively unexplored. In this paper, we consider a multi-IRS-aided orthogonal frequency-division multiplexing (OFDM) radar and study the theoretically achievable accuracy of target detection. In addition, we jointly design the O…
Intelligent reflecting surface (IRS) has emerged as a transforming solution to enrich wireless communications by efficiently reconfiguring the propagation environment. In this paper, a novel IRS circuit characterization model is proposed for practical beamforming design incorporating various electrical parameters of the meta-surface unit cell. Specifically, we have modelled the IRS control parameters, phase shift (PS) and reflection amplitude (RA) at the communication receiver, in addition to the circuit level parameter, variable effective capacitance $C$ of IRS unit cell. We have obtained clo…
The intelligent reflecting surface (IRS) technology has recently attracted a lot of interest in wireless communications research. An IRS consists of passive reflective elements capable of tuning the phase, amplitude, frequency and polarization of the impinging waveforms. Given such desirable properties, the wireless channel characteristics can be controlled and optimized for specific signal design and processing needs -- thus promising significant potential in radar applications. In this paper, we establish the theoretical foundations for introducing IRS into a radar system and study the poten…
Intelligent reflecting surface (IRS) technology offers more feasible propagation paths for millimeter-wave (mmWave) communication systems to overcome blockage than existing technologies. In this paper, we consider a downlink wireless system with the IRS and formulate a joint power allocation and beamforming design problem to maximize the weighted sum-rate, which is a multi-variable optimization problem. To solve the problem, we propose a novel alternating manifold optimization based beamforming algorithm. Simulation results show that our proposed optimization algorithm outperforms existing alg…
In this paper, we consider IRS-assisted transmissions from a multi-antenna access point (AP) to a receiver with uncertain channel information. By adjusting the magnitude of reflecting coefficients, the IRS can sustain its operations by harvesting energy from the AP's signal beamforming. Considering channel estimation errors, we model both the AP-IRS channel and the AP-IRS-receiver as a cascaded channel by norm-based uncertainty sets. This allows us to formulate a robust optimization problem to minimize the AP's transmit power, subject to the user's worst-case data rate requirement and the IRS'…
In this paper, large-scale intelligent reflecting sur-face (IRS)-assisted multiple-input single-output (MISO) system is considered in the presence of channel uncertainty. To maximize the average sum rate of the system by jointly optimizing the active beamforming at the BS and the passive phase shifts at the IRS, while satisfying the power constraints, a novel robust beamforming design is proposed by using the penalty dual decomposition (PDD) algorithm. By applying the upper bound maximization/minimization (BSUM) method, in each iteration of the algorithm, the optimal solution for each variable…
This paper investigates a downlink multiple-input single-output intelligent reflecting surface (IRS) aided non-orthogonal multiple access (NOMA) system, where a base station (BS) serves multiple users with the aid of IRSs. Our goal is to maximize the sum rate of all users by jointly optimizing the active beamforming at the BS and the passive beamforming at the IRS, subject to successive interference cancellation decoding rate conditions and IRS reflecting elements constraints. In term of the characteristics of reflection amplitudes and phase shifts, we consider ideal and non-ideal IRS assumpti…
This manuscript presents an energy-efficient alternating optimization framework based on intelligent reflective surfaces (IRS) aided non-orthogonal multiple access beamforming (NOMA-BF) system for 6G wireless communications. Specifically, this work proposes a centralized IRS-enabled design for the NOMA-BF system to optimize the active beamforming and power allocation coefficient (PAC) of users at the transmitter in the first stage and passive beamforming at IRS in the 2nd stage to maximize the energy efficiency (EE) of the network. However, an increment in the number of supportable users with …
Intelligent reflecting surface (IRS) has been regarded as a promising and revolutionary technology for future wireless communication systems owing to its capability of tailoring signal propagation environment in an energy/spectrum/hardware-efficient manner. However, most existing studies on IRS optimizations are based on a simple and ideal reflection model that is impractical in hardware implementation, which thus leads to severe performance loss in realistic wideband/multi-band systems. To deal with this problem, in this paper we first propose a more practical and more tractable IRS reflectio…
This paper studies an intelligent reflecting surface (IRS)-assisted integrated sensing and communication (ISAC) system, in which one IRS is deployed to not only assist the wireless communication from a multi-antenna base station (BS) to a single-antenna communication user (CU), but also create virtual line-of-sight (LoS) links for sensing targets at areas with LoS links blocked. We consider that the BS transmits combined information and sensing signals for ISAC. Under this setup, we jointly optimize the transmit information and sensing beamforming at the BS and the reflective beamforming at th…
Intelligent reflecting surface (IRS) has emerged as a revolutionizing solution to enhance wireless communications by intelligently changing the propagation environment. Prior studies on IRS are based on an ideal reflection model with a constant amplitude and a variable phase shift. However, it is difficult and unrealistic to implement an IRS satisfying such ideal reflection model in practical applications. In this letter, we aim to investigate the phase-amplitude-frequency relationship of the reflected signals and propose a practical model of reflection coefficient for an IRS-aided wideband sy…
This paper investigates an intelligent reflecting surface (IRS)-aided multi-cell multiple-input single-output (MISO) system with several multi-antenna base stations (BSs) each communicating with a single-antenna user, in which an IRS is dedicatedly deployed for assisting the wireless transmission and suppressing the inter-cell interference. Under this setup, we jointly optimize the coordinated transmit beamforming at the BSs and the reflective beamforming at the IRS, for the purpose of maximizing the minimum weighted signal-to-interference-plus-noise ratio (SINR) at the users, subject to the i…
We consider the problem of spatial channel covariance matrix (CCM) estimation for intelligent reflecting surface (IRS)-assisted millimeter wave (mmWave) communication systems. Spatial CCM is essential for two-timescale beamforming in IRS-assisted systems; however, estimating the spatial CCM is challenging due to the passive nature of reflecting elements and the large size of the CCM resulting from massive reflecting elements of the IRS. In this paper, we propose a CCM estimation method by exploiting the low-rankness as well as the positive semi-definite (PSD) 3-level Toeplitz structure of the …
Intelligent reflecting surfaces (IRSs) constitute passive devices, which are capable of adjusting the phase shifts of their reflected signals, and hence they are suitable for passive beamforming. In this paper, we conceive their design with the active beamforming action of multiple-input multipleoutput (MIMO) systems used at the access points (APs) for improving the beamforming gain, where both the APs and users are equipped with multiple antennas. Firstly, we decouple the optimization problem and design the active beamforming for a given IRS configuration. Then we transform the optimization p…
As an excellent aided communication tool, intelligent reflecting surface (IRS) can make a significant rate enhancement and coverage extension. In this paper, we present an investigation on beamforming in an IRS-aided directional modulation (DM) network. To fully explore the advantages of IRS, two beamforming methods with enhanced secrecy rate (SR) performance are proposed. The first method of maximizing secrecy rate (Max-SR) alternately optimizes confidential message (CM) beamforming vector, artificial noise (AN) beamforming vector and phase shift matrix. The first optimization vector is direc…
Intelligent reflecting surface (IRS) is a promising solution to build a programmable wireless environment for future communication systems. In practice, an IRS consists of massive low-cost elements, which can steer the incident signal in fully customizable ways by passive beamforming. In this paper, we consider an IRS-aided multiuser multiple-input single-output (MISO) downlink communication system. In particular, the weighted sum-rate of all users is maximized by joint optimizing the active beamforming at the base-station (BS) and the passive beamforming at the IRS. In addition, we consider a…
In this paper, the problem of maximizing the sum of data rates of all users in an intelligent reflecting surface (IRS)-assisted millimeter wave multicast multiple-input multiple-output communication system is studied. In the considered model, one IRS is deployed to assist the communication from a multiantenna base station (BS) to the multi-antenna users that are clustered into several groups. Our goal is to maximize the sum rate of all users by jointly optimizing the transmit beamforming matrices of the BS, the receive beamforming matrices of the users, and the phase shifts of the IRS. To solv…
In this letter, we consider the fundamental problem of jointly designing the transmit beamformers and the phase-shifts of the intelligent reflecting surface (IRS) / reconfigurable intelligent surface (RIS) to minimize the transmit power, subject to quality-of-service constraints at individual users in an IRS-assisted multiuser multiple-input single-output downlink communication system. In particular, we propose a new successive convex approximation based second-order cone programming approach in which all the optimization variables are simultaneously updated in each iteration. Our proposed sch…
In this paper, we investigate the secure beamforming design in an intelligent reflection surface (IRS) assisted millimeter wave (mmWave) system, where the hybrid beamforming (HB) and the passive beamforming (PB) are employed by the transmitter and the IRS, respectively. To maximize the secrecy capacity, the joint optimization of HB and PB is formulated as a nonconvex problem with constant-modulus constraints. To efficiently solve such a challenging problem, the original problem is decomposed into a PB subproblem and an HB subproblem, then these two subproblems are sequentially solved by propos…
In this letter, secure beamforming in a multiple intelligent reflecting surfaces (IRSs)-aided millimeter-wave (mmWave) system is investigated. In this system, the secrecy rate is maximized by controlling the on-off status of each IRS as well as optimizing the phase shift matrix of the IRSs. This problem is posed as a joint optimization problem of transmit beamforming and IRS control, whose goal is to maximize the secrecy rate under the total transmission power and unit-modulus constraints. The problem is difficult to solve optimally due to the nonconvexity of constraint conditions and coupled …
In this paper, we propose a beamforming design for dual-functional radar-communication (DFRC) systems at the millimeter wave (mmWave) band, where hybrid beamforming and sub-arrayed MIMO radar techniques are jointly exploited. We assume that a base station (BS) is serving a user equipment (UE) located in a Non-Line-of-Sight (NLoS) channel, which in the meantime actively detects multiple targets located in a Line-of-Sight (LoS) channel. Given the optimal communication beamformer and the desired radar beampattern, we propose to design the analog and digital beamformers under non-convex constant-m…
Joint radar-communications (JRC) benefits from multi-functionality of radar and communication operations using same hardware and radio frequency (RF) spectrum resources. Thus JRC systems possess very high potential to be employed into the sixth generation (6G) standards. This paper designs a flexible beamformer for multiple-input multiple output (MIMO) JRC with maximized spectral efficiency (SE). Hybrid beamforming is implemented which constitutes lesser number of RF chains than number of transmitter antennas. We jointly express JRC rate with communication and radar entities including a weight…
In this paper, we propose a radar-assisted predictive beamforming design for vehicle-to-infrastructure (V2I) communication by relying on the joint sensing and communication functionalities at road side units (RSUs). We present a novel extended Kalman filtering (EKF) framework to track and predict kinematic parameters of the vehicle. By exploiting the radar functionality of the RSU we show that the communication beam tracking overheads can be drastically reduced. Numerical results have demonstrated that the proposed radar-assisted approach significantly outperforms the communication-only feedba…
In this paper, we investigate an intelligent reflect surface (IRS) assisted multi-user millimeter wave (mmWave) downlink communication system, exploiting IRS to alleviate the blockage effect and enhance the performance of the mmWave system. Considering the impact of IRS on user association, we formulate a sum rate maximization problem by jointly optimizing the passive beamforming at IRS and user association, which is an intractable non-convex problem. Then an alternating optimization algorithm is proposed to solve the problem efficiently. In the proposed algorithm, passive beamforming at IRS i…
Cognitive multiple-input multiple-output (MIMO) radar is capable of adjusting system parameters adaptively by sensing and learning in complex dynamic environment. Beamforming performance of MIMO radar is guided by both beamforming weight coefficients and the transceiver configuration. We propose a cognitive-driven MIMO array design where both the beamforming weights and the transceiver configuration are adaptively and concurrently optimized under different environmental conditions. The perception-action cycle involves data collection of full virtual array, covariance reconstruction and joint d…
We study the beamforming optimization for an intelligent reflecting surface (IRS)-aided full-duplex (FD) communication system in this letter. Specifically, we maximize the sum rate of bi-directional transmissions by jointly optimizing the transmit beamforming and the beamforming of the IRS reflection. A fast converging alternating algorithm is developed to tackle this problem. In each iteration of the proposed algorithm, the solutions to the transmit beamforming and the IRS reflect beamforming are obtained in a semi-closed form and a closed form, respectively. Compared to an existing method ba…
In this paper, we propose an energy-efficient radar beampattern design framework for a Millimeter Wave (mmWave) massive multi-input multi-output (mMIMO) system, equipped with a hybrid analog-digital (HAD) beamforming structure. Aiming to reduce the power consumption and hardware cost of the mMIMO system, we employ a machine learning approach to synthesize the probing beampattern based on a small number of RF chains and antennas. By leveraging a combination of softmax neural networks, the proposed solution is able to achieve a desirable beampattern with high accuracy.
This work presents a novel robust beamforming design dedicated for dual-functional radar and communication (DFRC) base stations (BSs) in the context of integrated sensing and communications (ISAC). The architecture is intended for circumstances with imperfect channel state information (CSI). Our suggested approach demonstrates several tradeoffs for joint radar-communication deployment. Due to the DFRC nature of the design, the beamformer can simultaneously point towards an intended target, while optimizing communication quality of service. We unveil several insights regarding closed form expre…
This article studies and derives beamforming design in a dual-functional radar-communication (DFRC) multiple-input-multiple-output system. We focus on a scenario, where the DFRC base station communicates with downlink communication users, with imperfect channel state information knowledge, and performs target detection, all via the same transmit signal. Through careful relaxation procedures, we arrive at a suitable and novel optimization problem, which maximizes the radar output power in the Bartlett sense, under probabilistic outage signal-to-interference-and-noise ratio constraints. Theoreti…
