Drying of bacterial suspensions is frequently encountered in a plethora of natural and engineering processes. However, the evaporation-driven mechanical instabilities of dense consolidating bacterial suspensions have not been explored heretofore. Here, we report the formation of two different crack patterns of drying suspensions of \textit{Escherichia coli} (\textit{E. coli}) with distinct motile behaviors. Circular cracks are observed for wild-type \textit{E. coli} with active swimming, whereas spiral-like cracks form for immotile bacteria. Using the elastic fracture mechanics and the poroelastic theory, we show that the formation of the circular cracks is determined by the tensile nature of the radial drying stress once the cracks are initiated by the local order structure of bacteria due to their collective swimming. Our study demonstrates the link between the microscopic swimming behaviors of individual bacteria and the mechanical instabilities and macroscopic pattern formation of drying bacterial films. The results shed light on the dynamics of active matter in a drying process and provide useful information for understanding various biological processes associated with drying bacterial suspensions.
Drying of colloidal dispersion and their consolidation into a particulate deposit is a common phenomenon. This process involves various physical processes such as diffusion of liquid molecules into the ambient atmosphere and advection of dispersed particles via evaporation driven flow. The colloidal particles forming a dried deposit exhibits distinct patterns and frequently possess structural defects such as desiccation cracks. This chapter gives an introductory review of the drying of colloidal dispersion and various associated phenomena. In principle, the drying of colloid dispersion, the pr…
The drying of a colloidal dispersion can result in a gel phase defined as a porous matrix saturated in solvent. During the drying process, high mechanical stresses are generated. When these stresses exceed the strength of the material, they can be released in the formation of cracks. This process strongly depends on both the mechanical properties of the material and the way the gel consolidates. In this report, we give experimental evidences that the number of cracks formed in the consolidating film depend on the drying rate, the nature of the solvent and the mechanical properties of the collo…
A possible clarification of memory effect observed in crack patterns of drying pastes [A. Nakahara and Y. Matsuo, J. Phys. Soc. Japan 74, 1362 (2005)] is presented in terms of a macroscopic elastoplastic model of isotropic pastes. We study flows driven by steady gravitational force instead of external oscillation. The model predicts creation of residual tension in favor of cracks perpendicular to the flow direction, thus causing the same type of memory effect as that reported by Nakahara and Matsuo for oscillated CaCO_3 pastes.
In the drying process of paste, we can imprint into the paste the order how it should be broken in the future. That is, if we vibrate the paste before it is dried, it remembers the direction of the initial external vibration, and the morphology of resultant crack patterns is determined solely by the memory of the direction. The morphological phase diagram of crack patterns and the rheological measurement of the paste show that this memory effect is induced by the plasticity of paste.
When colloidal suspensions dry, stresses build up and cracks often occur - a phenomenon undesirable for important industries such as paint and ceramics. We demonstrate an effective method which can completely eliminate cracking during drying: by adding emulsion droplets into colloidal suspensions, we can systematically decrease the amount of cracking, and eliminate it completely above a critical droplet concentration. Since the emulsion droplets eventually also evaporate, our technique achieves an effective function while making little changes to the component of final product, and may therefo…
-- A scientific hurdle in manufacturing solid films by drying colloidal layers is preventing them from fracturing. This paper examines how the drying rate of colloidal liquids influences the particle packing at the nanoscale in correlation with the crack patterns observed at the macroscale. Increasing the drying rate results in more ordered, denser solid structures, and the dried samples have more cracks.Yet, introducing a holding period (at a prescribed point) during the drying protocol results in a more disordered solid structure with significantly less cracks. To interpret these observation…
A deposited drop of bovine serum albumin salt solution experiences both gelation and fracturation during evaporation. The cracks appearing at the edge of the gelling drop are regularly spaced, due to the competition between the evaporation-induced and relaxation-induced stress evolution. Subsequently, the mean crack spacing evolves in an unexpected way, being inversely proportional instead of proportional to the deposit thickness. This evolution has been ascribed to the change with time of the average shrinkage stress, the crack patterning being purely elastic instead of evaporation-controlled…
The formation of three-dimensional prismatic cracks in the drying process of starch-water mixtures is investigated numerically. We assume that the mixture is an elastic porous medium which possesses a stress field and a water content field. The evolution of both fields are represented by a spring network and a phenomenological model with the water potential, respectively. We find that the water content distribution has a propagating front which is not explained by a simple diffusion process. The prismatic structure of cracks driven by the water content field is observed. The depth dependence a…
We report an experimental study of the crack pattern formed during the drying of a colloidal suspension. A horizontal fiber, which provides a one dimensional, boundary-free substrate, is coated by a film of micronic thickness. The geometry imposes a remarkable annular crack pattern and allowing precise measurements of the crack spacing over a short range of film thickness (between 2 and 10 $μ$m) which varies linearly with the film height. We compare our experimental data with a model proposed by Kitsunezaki which suggests that the variation of the crack spacing with the film thickness depends …
In this study, we experimentally investigated the time dependence of the statistical properties of two-dimensional drying crack patterns to determine the functional form of fragment size distribution. Experiments using a thin layer of a magnesium carbonate hydroxide paste revealed a "dynamical scaling" property in the time series of the fragment size distribution, which has been predicted by theoretical and numerical studies. Further analysis results based on Bayesian inference show the transition of the functional form of the fragment size distribution from a log-normal distribution to a gene…
We investigate the formation of spiral crack patterns during the desiccation of thin layers of precipitates in contact with a substrate. This symmetry-breaking fracturing mode is found to arise naturally not from torsion forces, but from a propagating stress front induced by the fold-up of the fragments. We model their formation mechanism using a coarse-grain model for fragmentation and successfully reproduce the spiral cracks. Fittings of experimental and simulation data show that the spirals are logarithmic, corresponding to constant deviation from a circular crack path. Theoretical aspects …
A study of crack patterns in laponite films of different thickness is presented. Two cracking regimes are observed. The earlier with a higher rate of desiccation and shrinking has predominantly four-fold vertices in the crack network, while the later regime has less volume shrinking and forms mainly three-fold vertices. The pattern shows a self-similarity under coarse-graining. The graph of area covered by the cracks versus minimum crack-width resolved, scales with the film thickness. Curves representing crack area for different thickness can thus be made to collapse onto a single curve.
Consolidation of colloidal gels results in enormous stresses that are usually released in the formation of undesirable cracks. The capacity of a gel network to crack during drying depends on the existence and significance of a pressure gradient in the pore liquid; in addition it depends on the way the gel relaxes the resulting drying stresses. In this paper the effect of a binary mixture of solvents saturating the gel network on the crack patterns formation is investigated. Indeed, incorporation of a small quantity of non-volatile cosolvent, i.e. glycerol, inhibits drying-induced cracks; moreo…
The fracture mechanics was widely employed to explain the crack propagation in the deposition produced by drying colloidal suspension. However, more complex than conventional fracture, those cracks periodically distribute and make up a unique pattern. This still remains mysterious so far. Inspired by the concept of spinodal decomposition, here, we develop the theory to elucidate the spatial arrangement of the cracks, which indicates that the crack pattern is generated by the phase separation of colloidal clusters and water. It concludes that the crack spacing results from the wavelength of the…
Experiments involving vibrating pastes before drying were performed for the purposes of controlling the crack patterns that appear in the drying process. These experiments revealed a transition in the direction of lamellar cracks from perpendicular to parallel when compared with the direction of the initial external vibration as the solid volume fraction of the paste is decreased. This result suggests a transition in the "memory" in paste, which is visually represented as morphological changes in the crack pattern. Given that the memory in paste represents the flow pattern induced by the initi…
Cracking of suspensions during drying is a common problem. While additives, e.g. binders and surfactants, can mitigate this problem, some applications, such as printing conductive pastes or sintering green bodies, do not lend themselves to the use of additives. Capillary suspensions provide an alternative formulation without additives. In this work, we use simultaneous stress and weight measurements to investigate the influence of formulation and drying conditions. Capillary suspensions dry more homogeneously and with lower peak stresses, leading to an increased robustness against cracking com…
Many clays, soils, biological tissues, foods, and coatings are shrinkable, granular materials: they are composed of packed, hydrated grains that shrink when dried. In many cases, these packings crack during drying, critically hindering applications. However, while cracking has been widely studied for bulk gels and packings of non-shrinkable grains, little is known about how packings of shrinkable grains crack. Here, we elucidate how grain shrinkage alters cracking during drying. Using experiments with model shrinkable hydrogel beads, we show that differential shrinkage can dramatically alter c…
Pattern formation in drying protein droplets continues to attract considerable research attention because it can be linked to specific protein-protein interactions. An extensive study of the drying evolution and the final crack patterns are presented, highlighting the concentration dependence (from 1 to 13 wt%) on two globular proteins, lysozyme (Lys) and bovine serum albumin (BSA), in de-ionized water. The drying evolution starts with a constant contact radius mode and shifts to a mixed mode where both fluid front and contact angle changes. The contact angle monotonically decreases, whereas, …
Image processing and pattern recognition offer a useful and versatile method for optically characterizing drops of a colloidal solution during the drying process and in its final state. This paper exploits image processing techniques applied to cross-polarizing microscopy to probe birefringence and the bright-field microscopy to examine the morphological patterns. The bio-colloidal solution of interest is a mixture of water, liquid crystal (LC) and three different proteins [lysozyme (Lys), myoglobin (Myo), and bovine serum albumin (BSA)], all at a fixed relative concentration. During the dryin…
We investigate the desiccation crack patterns on the surface of a drying paste made of calcium carbonate (CaCO$_3$) powder and distilled water. Forced vibration of the CaCO$_3$ paste prior to drying results in an anisotropic crack pattern, in which many long cracks develop along a specific preferred direction. We reveal that the preferred direction changes from perpendicular to parallel to the vibration direction at the threshold velocity of vibration. The transition is attributed to the reorientation of constituent particles subjected to the forced oscillatory flow of fluid in the paste.
We investigate the initiation of cracks in vertically freestanding water-saturated colloidal pillars constructed using a direct-write technique. Paradoxically, the cracks form during drying at the free end, far from the substrate, where the particle network is unconstrained in contracting its volume as it bears compression by a uniform capillary pressure acting at its outer surface. This is explained by a dominant balance of wetting energy terms, from which follows a simple relationship between the particle size and pillar dimensions that captures the presence or absence of cracks. This relati…
We present an experimental investigation of drying suspensions of both hard and soft nanolatex spheres. The crack formation is examined as a function of the proportion of hard and soft deformable particles, leading to tunable elastic properties of the drying film. In our experiments corresponding to a given layer thickness, no crack formation could be observed below an onset value of the proportion in hard spheres around 0.45. During the drying process, the mass of films with various compositions in hard and soft spheres is measured as a function of time. The results suggest that the soft part…
We report an experimental study on the drying of silica colloidal dispersions. Here we focus on a surface instability occurring in a drying paste phase before crack formation which affects the final film quality. Observations at macroscopic and microscopic scales reveal the occurrence of the instability, and the morphology of the film surface. Furthermore, we show that the addition of adsorbing polymers on silica particles can be used to suppress the instability under particular conditions of molecular weight and concentration. We relate this suppression to the increase of the paste elastic mo…
A fascinating class of patterns, often encountered in nature as meandering cracks on rocks, dried-out fields and tectonic plates is produced by the fracture of solids. Here we report the observation and modeling of an unusual type of patterns consisting of spiral cracks within fragments of a thin layer of drying precipitate. We find that this symmetry-breaking cracking mode arises naturally not from twisting forces, but from a propagating stress front induced by the fold-up of the fragments.
Polygonal desiccation crack patterns are commonly observed in natural systems. Despite their quotidian nature, it is unclear whether similar crack patterns which span orders of magnitude in length scales share the same underlying physics. In thin films, the characteristic length of polygonal cracks is known to monotonically increase with the film thickness, however, existing theories that consider the mechanical, thermodynamic, hydrodynamic, and statistical properties of cracking often lead to contradictory predictions. Here we experimentally investigate polygonal cracks in drying suspensions …
The process of drying is a simple physical mechanism that drives a system to relax from one equilibrium point to another. The native states of the constituent particles in the droplets can be linked to the emergent morphological patterns via this drying process. This paper explores the interplay between different initial concentrations of a globular protein lysozyme ($ϕ_p$) and the salts ($ϕ_s$) in the phosphate buffer saline (PBS). The $ϕ_s$ = 0 wt% embodies the lysozyme solution prepared in de-ionized water. The samples at $ϕ_s$ = 0.9 wt% display a dark texture in the central region. We exam…
The ordering of particles in the drying process of a colloidal suspension is crucial in determining the properties of the resulting film. For example, microscopic inhomogeneities can lead to the formation of cracks and defects that can deteriorate the quality of the film considerably. This type of problem is inherently multiscale and here we study it numerically, using our recently developed method for the simulation of soft polymeric capsules in multicomponent fluids. We focus on the effect of the particle softness on the film microstructure during the drying phase and how it relates to the f…
Directional drying of a colloidal dispersion: quantitative description with water potential measurements using water clusters in a poly(dimethylsiloxane) microfluidic chip
Drying of colloidal droplets on solid, rigid substrates is associated with a capillary pressure developing within the droplet. In due course of time, the capillary pressure builds up due to droplet evaporation resulting in the formation of a colloidal thin film that is prone to crack formation. In this study, we show that introducing a minimal amount of nematic liquid crystal (NLC) can completely suppress the crack formation. The mechanism behind the curbing of the crack formation may be attributed to the capillary stress-absorbing cushion provided by the elastic arrangements of the liquid cry…
When a flat sample of medium density fibreboard (MDF) is exposed to radiant heat in an inert atmosphere, primary crack patterns suddenly start to appear over the entire surface before pyrolysis and any charring occurs. Contrary to common belief that crack formation is due to drying and shrinkage, it was demonstrated for square samples that this results from thermomechanical instability. In the present paper, new experimental data are presented for circular samples of the same MDF material. The sample was exposed to radiant heating at 20 or 50 kW/m2, and completely different crack patterns with…
Patterns are quotidian in nature. Distinct multiscale patterns are generally a consequence of nonequilibrium dynamical processes associated with mechanical or hydrodynamic instabilities. In this thesis, I report experimental investigations on pattern formation in a few examples of fluid and granular systems, and uncover the underlying mechanisms that give rise to those patterns. Leidenfrost drops are known to experience star-shaped oscillations with little damping. However, the underlying mechanism remains unclear. Here I report that the hydrodynamic coupling between the rapid evaporated vapor…
