Integration of electronics-based residential appliances and distributed energy resources in homes is expected to rise with grid decarbonization. These devices may introduce significant harmonics into power networks that need to be closely studied in order to accurately model and forecast load. However, it can be difficult to obtain harmonic-rich voltage and current data -- necessary for identifying accurate load models -- for residential electrical loads. Recognizing this need, first a set of electronics-based end-use loads is identified and modeled in an electromagnetic transients program tool for a residence. Second, an impedance-varying method is proposed to generate harmonic data that captures harmonic propagation to the supply voltage and harmonic interactions among end-use loads connected to the same supply voltage. Third, a harmonic-rich dataset produced via the proposed methodology is demonstrated to successfully identify frequency coupling matrix-based harmonic load models using the least-squares method. Numerical results demonstrate the accuracy of the model. The impact of limited data availability on model identification is also explored.
Long, lightly loaded feeders serving residential loads may begin to experience voltage excursions as plug-in electric vehicle (PEV) penetration increases. Residential PEV charging tends to occur during peak-load hours on residential feeders, leading to increased peak loads and potential voltage excursions. To avoid voltage excursions, two PEV charging control strategies were investigated using the IEEE 34-bus feeder. The first strategy shifts PEV charging energy from peak hours to off-peak hours; the other strategy allows PEVs to provide reactive power support. Undervoltage excursions seen in …
Load forecasting is an integral part of power system operations and planning. Due to the increasing penetration of rooftop PV, electric vehicles and demand response applications, forecasting the load of individual and a small group of households is becoming increasingly important. Forecasting the load accurately, however, is considerable more difficult when only a few households are included. A way to mitigate this challenge is to provide a set of scenarios instead of one point forecast, so an operator or utility can consider a range of behaviors. This paper proposes a novel scenario forecasti…
Advanced metering infrastructure systems record a high volume of residential load data, opening up an opportunity for utilities to understand consumer energy consumption behaviors. Existing studies have focused on load profiling and prediction, but neglected the role of socioeconomic characteristics of consumers in their energy consumption behaviors. In this paper, we develop a prediction model using deep neural networks to predict load patterns of consumers based on their socioeconomic information. We analyze load patterns using the K-means clustering method and use an entropy-based feature s…
In this paper, we introduce mREAL-GAN, a generative adversarial network (GAN) for the parallel generation of multiple residential electrical appliance load (mREAL) profiles. mREAL-GAN is intended for use in community-scale low-voltage network analysis, and represents a departure from previous methods for this purpose, which break the generation of appliance load profiles into several steps and largely model each appliance independently. Instead, mREAL-GAN models appliance load profiles in an end-to-end manner, and generates multiple appliance load profiles in parallel in a way that captures in…
For the last ten years, utilities have observed on-going transitions on consumers' load curves. The previously flat load curves have more frequently turned into duck-shape. This is jointly caused by the increasing household loads as well as the popularity of rooftop solar photovoltaic. Such load curve transition challenges the operational flexibility of the existing systems and greatly increases the per-MWh energy costs. Peak shaving, in this context, becomes a critical task to demand-side management. Owing to the development of Battery Energy Storage Systems (BESS), numerous peak shaving stra…
An inexpensive protection device capable of disconnecting a load upon detecting a voltage sag or surge is presented. Said device is aimed towards the residential voltage of Venezuela's electrical system. The device is based on the Arduino platform, and uses an ATmega 328P. It detects the presence of a voltage sag or surge by sampling the residential voltage used to feed the load, and continuously measuring the RMS $\frac{1}{2}$ voltage. It disconnects the load after 3 semi-cycles where the residential voltage is outside the boundaries established by Venezuela's national electrical code, and th…
University of Chinese Academy of Sciences（中国科学院大学）
Accurate day-ahead individual residential load forecasting is of great importance to various applications of smart grid on day-ahead market. Deep learning, as a powerful machine learning technology, has shown great advantages and promising application in load forecasting tasks. However, deep learning is a computationally-hungry method, and requires high costs (e.g., time, energy and CO2 emission) to train a deep learning model, which aggravates the energy crisis and incurs a substantial burden to the environment. As a consequence, the deep learning methods are difficult to be popularized and a…
University of Central Florida（中佛罗里达大学）；University of Ottawa（渥太华大学）
Appliance-level load forecasting plays a critical role in residential energy management, besides having significant importance for ancillary services performed by the utilities. In this paper, we propose to use an LSTM-based sequence-to-sequence (seq2seq) learning model that can capture the load profiles of appliances. We use a real dataset collected fromfour residential buildings and compare our proposed schemewith three other techniques, namely VARMA, Dilated One Dimensional Convolutional Neural Network, and an LSTM model.The results show that the proposed LSTM-based seq2seq model outperform…
The rising demand for electricity and its essential nature in today's world calls for intelligent home energy management (HEM) systems that can reduce energy usage. This involves scheduling of loads from peak hours of the day when energy consumption is at its highest to leaner off-peak periods of the day when energy consumption is relatively lower thereby reducing the system's peak load demand, which would consequently result in lesser energy bills, and improved load demand profile. This work introduces a novel way to develop a learning system that can learn from experience to shift loads from…
International Institute of Information Technology, Hyderabad（海得拉巴国际信息技术学院）
Individual device loads and energy consumption feedback is one of the important approaches for pursuing users to save energy in residences. This can help in identifying faulty devices and wasted energy by devices when left On unused. The main challenge is to identity and estimate the energy consumption of individual devices without intrusive sensors on each device. Non-intrusive load monitoring (NILM) or energy disaggregation, is a blind source separation problem which requires a system to estimate the electricity usage of individual appliances from the aggregated household energy consumption.…
University of North Dakota（北达科他大学）；Czech Technical University in Prague（捷克布拉格技术大学）；International University of Rabat（拉巴特国际大学）；University of Leeds（利兹大学）；Mohammed V University in Rabat（拉巴特穆罕默德五世大学）
With the booming growth of advanced digital technologies, it has become possible for users as well as distributors of energy to obtain detailed and timely information about the electricity consumption of households. These technologies can also be used to forecast the household's electricity consumption (a.k.a. the load). In this paper, we investigate the use of Variational Mode Decomposition and deep learning techniques to improve the accuracy of the load forecasting problem. Although this problem has been studied in the literature, selecting an appropriate decomposition level and a deep learn…
The data collected by smart meters contain a lot of useful information. One potential use of the data is to track the energy consumptions and operating statuses of major home appliances.The results will enable homeowners to make sound decisions on how to save energy and how to participate in demand response programs. This paper presents a new method to breakdown the total power demand measured by a smart meter to those used by individual appliances. A unique feature of the proposed method is that it utilizes diverse signatures associated with the entire operating window of an appliance for ide…
While non-parametric models, such as neural networks, are sufficient in the load forecasting, separate estimates of fixed and shiftable loads are beneficial to a wide range of applications such as distribution system operational planning, load scheduling, energy trading, and utility demand response programs. A semi-parametric estimation model is usually required, where cost sensitivities of demands must be known. Existing research work consistently uses somewhat arbitrary parameters that seem to work best. In this paper, we propose a generic class of data-driven semiparametric models derived f…
Biocomplexity Institute and Initiative, University of Virginia（弗吉尼亚大学生物复杂性研究所与倡议中心）；University of Virginia（弗吉尼亚大学）
Efficient energy consumption is crucial for achieving sustainable energy goals in the era of climate change and grid modernization. Thus, it is vital to understand how energy is consumed at finer resolutions such as household in order to plan demand-response events or analyze the impacts of weather, electricity prices, electric vehicles, solar, and occupancy schedules on energy consumption. However, availability and access to detailed energy-use data, which would enable detailed studies, has been rare. In this paper, we release a unique, large-scale, synthetic, residential energy-use dataset f…
Electrical load profiling supports retailers and distribution network operators in having a better understanding of the consumption behavior of consumers. However, traditional clustering methods for load profiling are centralized and require access to all the smart meter data, thus causing privacy issues for consumers and retailers. To tackle this issue, we propose a privacy-preserving distributed clustering framework for load profiling by developing a privacy-preserving accelerated average consensus (PP-AAC) algorithm with proven convergence. Using the proposed framework, we modify several co…
The rapid progression of sophisticated advance metering infrastructure (AMI), allows us to have a better understanding and data from demand-response (DR) solutions. There are vast amounts of research on the internet of things and its application on the smart grids has been examined to find the most optimized bill for the user; however, we propose a novel approach of house loads, combined with owning a battery electric vehicle (BEV) equipped with the BEV communication controllers and vehicle-to-grid (V2G) technology. In this paper we use the Stackelberg game approach to achieve an efficient and…
High penetration of residential photovoltaic (PV) in low-voltage distribution networks (LVDN) makes the unbalance issue more sever due to the asymmetry of generation/load characteristic in different phases, and may lead to infeasible operation of the whole network. Phase switching device (PSD), which can switch the connected phase of a residential load as required, is viable and efficient equipment to help address this issue. This paper, based on three-phase power flow (TUPF) formulation, aims to investigate the benefit of PSD on improving the operation feasibility of LVDN. The linear model of…
Non-Intrusive Load Monitoring (NILM) is an important application to monitor household appliance activities and provide related information to house owner or/and utility company via a single sensor installed at the electrical entry of the house. It can be used for different purposes in residential and industrial sectors. Thus, an increasing number of new algorithms have been developed in recent years. In these algorithms, researchers either use existing public datasets or collect their own data which causes such problems as insufficiency of electrical parameters, missing of ground-truth data, a…
Indrapratha Institute of Information Technology, Delhi（德里印德拉普拉斯塔信息技术学院）
Increasing population indicates that energy demands need to be managed in the residential sector. Prior studies have reflected that the customers tend to reduce a significant amount of energy consumption if they are provided with appliance-level feedback. This observation has increased the relevance of load monitoring in today's tech-savvy world. Most of the previously proposed solutions claim to perform load monitoring without intrusion, but they are not completely non-intrusive. These methods require historical appliance-level data for training the model for each of the devices. This data is…
