由FORTIS全息光栅解产生电子束光刻写入参数
Generating Electron Beam Lithography Write Parameters from the FORTIS Holographic Grating Solution
摘要:
远紫外线成像和光谱学罗兰圆望远镜(FORTIS)在成熟的技术方面取得了成功,用于在远紫外线中进行多物体光谱学,包括:成功实施下一代微光闸阵列;大面积微通道板探测器;以及具有层状(矩形)轮廓的弯曲、可变间隔凹槽的非球面“双阶”全息直纹衍射光栅。这些光学元件被用来建造一个高效和极简的“双反射”光谱望远镜在格里高利配置。然而,已经发现双阶设计固有的对莱曼α(Ly $α$)散射的敏感性是难以解决的问题,促使我们转向“离轴”设计。OAxFORTIS将通过封闭光路来降低其对Ly $α$的敏感性,因此检测器仅接收来自光栅的光。新的设计将收集面积减少了2倍,但是通过使用新的高效反射涂层和使用闪耀衍射光栅,可以重新获得和改善总的有效面积。后一种关键技术已经通过最近的进步实现,该进步使用电子束光刻和化学蚀刻在晶体硅中创建凹槽来创建具有令人印象深刻的平滑度的非常高效率的闪耀光栅。在这里,我们讨论的推导OAxFORTIS光栅的解决方案,以及用于将FORTIS全息光栅记录参数(以下的形式主义的野田等人。1974年a,b),弯曲和可变间隔的划线驱动电子束光刻写头在三维空间中所需的方法。我们还将讨论选择具有适当晶面取向的硅片的过程,并更新我们的制造准备工作。
英文摘要:
The Far-UV Off Rowland-circle Telescope for Imaging and Spectroscopy (FORTIS) has been successful in maturing technologies for carrying out multi-object spectroscopy in the far-UV, including: the successful implementation of the Next Generation of Microshutter Arrays; large-area microchannel plate detectors; and an aspheric "dual-order" holographically ruled diffraction grating with curved, variably-spaced grooves with a laminar (rectangular) profile. These optical elements were used to construct an efficient and minimalist "two-bounce" spectro-telescope in a Gregorian configuration. However, the susceptibility to Lyman alpha (Ly$α$) scatter inherent to the dual order design has been found to be intractably problematic, motivating our move to an "Off-Axis" design. OAxFORTIS will mitigate its susceptibility to Ly$α$ by enclosing the optical path, so the detector only receives light from the grating. The new design reduces the collecting area by a factor of 2, but the overall effective area can be regained and improved through the use of new high efficiency reflective coatings, and with the use of a blazed diffraction grating. This latter key technology has been enabled by recent advancements in creating very high efficiency blazed gratings with impressive smoothness using electron beam lithography and chemical etching to create grooves in crystalline silicon. Here we discuss the derivation for the OAxFORTIS grating solution as well as methods used to transform the FORTIS holographic grating recording parameters (following the formalism of Noda et al.1974a,b), into curved and variably-spaced rulings required to drive the electron beam lithography write-head in three dimensions. We will also discuss the process for selecting silicon wafers with the proper orientation of the crystalline planes and give an update on our fabrication preparations.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。