Silicon anodes promise high energy densities of next-generation lithium-ion batteries, but suffer from shorter cycle life. The accelerated capacity fade stems from the repeated fracture and healing of the solid-electrolyte interphase (SEI) on the silicon surface. This interplay of chemical and mechanical effects in SEI on silicon electrodes causes a complex aging behavior. However, so far, no model mechanistically captures the interrelation between mechanical SEI deterioration and accelerated SEI growth. In this article, we present a thermodynamically consistent continuum model of an electrode particle surrounded by an SEI layer. The silicon particle model consistently couples chemical reactions, physical transport, and elastic deformation. The SEI model comprises elastic and plastic deformation, fracture, and growth. Capacity fade measurements on graphite anodesand in-situ mechanical SEI measurements on lithium thin films provide parametrization for our model. For the first time, we model the influence of cycling rate on the long-term mechanical SEI deterioration and regrowth. Our model predicts the experimentally observed transition in time dependence from square-root-of-time growth during battery storage to linear-in-time growth during continued cycling. Thereby our model unravels the mechanistic dependence of battery aging on operating conditions and supports the efforts to prolong the battery life of next-generation lithium-ion batteries.
Silicon is one of the most promising anode materials for Lithium-ion batteries. Silicon endures volume changes upon cycling, which leads to subsequent pulverization and capacity fading. These drawbacks lead to a poor lifespan and hamper the commercialization of silicon anodes. In this work, a hybrid nanostructured anode based on silicon nanoparticles (SiNPs) anchored on vertically aligned carbon nanotubes (VACNTs) with defined spacing to accommodate volumetric changes is synthesized on commercial macroscopic current collector. Achieving electrodes with good stability and excellent electrochemi…
Electropolymerization plays a critical role in the electrochemical systems. In this chapter, we address such role within the context of interplay between kinetics and energetics. The trains of chin radical reactions leads to the formation of thin films in electrochemical devices. The structure of so-called solid electrolyte interphase (SEI) during the initial charge/discharge cycles of the device of any kind (i.e. rechargeable battery) on the surface of electrode directly controls the the ultimate stability and longevity. In this chapter, we study the morphological evolution of SEI, both in te…
Continuous solid electrolyte interface (SEI) formation remains the limiting factor of the lifetime of silicon nanoparticles (SiNPs) based negative electrodes. Methods that could provide clear diagnosis of the electrode degradation are of utmost necessity to streamline further developments. We demonstrate that electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM) can be used to quickly map SEI components and quantify LixSi alloys from single experiments, with resolutions down to 5 nm. Exploiting the low-loss part of the EEL spectrum allowed us to circumv…
Electrolyte reduction products form the solid-electrolyte interphase (SEI) on negative electrodes of lithium-ion batteries. Even though this process practically stabilizes the electrode-electrolyte interface, it results in continued capacity-fade limiting lifetime and safety of lithium-ion batteries. Recent atomistic and continuum theories give new insights into the growth of structures and the transport of ions in the SEI. The diffusion of neutral radicals has emerged as a prominent candidate for the long-term growth mechanism, because it predicts the observed potential dependence of SEI grow…
We present a mechanistic theory for predicting void evolution in the Li metal electrode during the charge and discharge of all-solid-state battery cells. A phase field formulation is developed to model vacancy annihilation and nucleation, and to enable the tracking of the void-Li metal interface. This is coupled with a viscoplastic description of Li deformation, to capture creep effects, and a mass transfer formulation accounting for substitutional (bulk and surface) Li diffusion and current-driven flux. Moreover, we incorporate the interaction between the electrode and the solid electrolyte, …
In this article, we derive and discuss a physics-based model for impedance spectroscopy of lithium batteries. Our model for electrochemical cells with planar electrodes takes into account the solid-electrolyte interphase (SEI) as porous surface film. We present two improvements over standard impedance models. Firstly, our model is based on a consistent description of lithium transport through electrolyte and SEI. We use well-defined transport parameters, e.g., transference numbers, and consider convection of the center-of-mass. Secondly, we solve our model equations analytically and state the …
Fracture of lithium-ion battery electrodes is found to contribute to capacity fade and reduce the lifespan of a battery. Traditional fracture models for batteries are restricted to consideration of a single, idealised particle; here, advanced X-ray computed tomography (CT) imaging, an electro-chemo-mechanical model and a phase field fracture framework are combined to predict the void-driven fracture in the electrode particles of a realistic battery electrode microstructure. The electrode is shown to exhibit a highly heterogeneous electrochemical and fracture response that depends on the partic…
Continued growth of the solid electrolyte interphase (SEI) is the major reason for capacity fade in modern lithium-ion batteries. This growth is made possible by a yet unidentified transport mechanism that limits the passivating ability of the SEI towards electrolyte reduction. We, for the first time, differentiate the proposed mechanisms by analyzing their dependence on the electrode potential. Our calculations are compared to recent experimental capacity fade data. We show that the potential dependence of SEI growth facilitated by solvent diffusion, electron conduction, or electron tunneling…
Growth of the solid electrolyte interphase (SEI) is a primary driver of capacity fade in lithium-ion batteries. Despite its importance to this device and intense research interest, the fundamental mechanisms underpinning SEI growth remain unclear. In Part I of this work, we present an electroanalytical method to measure the dependence of SEI growth on potential, current magnitude, and current direction during galvanostatic cycling of carbon black/Li half cells. We find that SEI growth strongly depends on all three parameters; most notably, we find SEI growth rates increase with nominal C rate …
Mathematical models of capacity fade can reduce the time and cost of lithium-ion battery development and deployment, and growth of the solid-electrolyte interphase (SEI) is a major source of capacity fade. Experiments in Part I reveal nonlinear voltage dependence and strong charge-discharge asymmetry in SEI growth on carbon black negative electrodes, which is not captured by previous models. Here, we present a theoretical model for the electrochemical kinetics of SEI growth coupled to lithium intercalation, which accurately predicts experimental results with few adjustable parameters. The key …
The path toward Li-ion batteries with higher energy-densities will likely involve use of thin lithium metal (Li) anode (<50 $μ$m in thickness), whose cyclability today remains limited by dendrite formation and low Coulombic efficiency. Previous studies have shown that the solid-electrolyte-interface (SEI) of Li metal plays a crucial role in Li electrodeposition and stripping. However, design rules for optimal SEIs on lithium metal are not well-established. Here, using integrated experimental and modeling studies on a series of structurally-similar SEI-modifying compounds as model systems, we r…
In-orbit satellite REIMEI, developed by the Japan Aerospace Exploration Agency, has been relying on off-the-shelf Li-ion batteries since its launch in 2005. The performance and durability of Li-ion batteries is impacted by various degradation mechanisms, one of which is the growth of the solid-electrolyte interphase (SEI). In this article, we analyse the REIMEI battery and parameterize a full-cell model with electrochemical cycling data, computer tomography images, and capacity fading experiments using image processing and surrogate optimization. We integrate a recent model for SEI growth into…
