X波段相控阵收发机的板级码调制嵌入式测试与校准
Board-level Code-Modulated Embedded Test and Calibration of an X-band Phased-Array Transceiver
摘要:
本文提出了一种基于码调制嵌入式测试(CoMET)的相控阵列机内测试和校准方法。我们的方法采用笛卡尔调制的测试信号在每个元素内使用现有的移相器,这些信号组合成一个聚合的代码复用的响应,下变频和创建代码调制的元素到元素的“干扰产品”使用内置的功率检测器,解调的相关性从数字化的干扰响应,并提取每个元素的振幅和相位使用方程求解器。旋转轴的方法进行了讨论,以准确提取相位附近的原始0/90/180/270度轴。使用ADI公司ADAR 1000芯片构建的8单元8-16 GHz相控阵,在板级接收和发射模式下演示了我们的技术。在6 GHz时,与网络分析仪测量值相比,CoMET提取的增益和相位精确到0.2 dB和3度以内。然后,我们在校准回路中采用CoMET,以确定在6 GHz的最佳控制设置,在阵列设计的8-16 GHz频段之外。我们实现了7位相位分辨率与均衡增益。均方根增益和相位误差从校准前的0.8dB和8度改善到校准后的0.1dB和1.7度。
英文摘要:
We present methods for built-in test and calibration of phased arrays using code-modulated embedded test (CoMET). Our approach employs Cartesian modulation of test signals within each element using existing phase shifters, combining of these signals into an aggregate code-multiplexed response, downconversion and creation of code-modulated element-to-element "interference products" using a built-in power detector, demodulation of correlations from the digitized interference response, and extraction of amplitude and phase per element using an equation solver. Rotated-axis methodology is discussed for accurate extraction of phase near the original 0/90/180/270 degree axes. Our techniques are demonstrated at board level for both receive and transmit modes using an eight-element 8-16 GHz phased array constructed using ADAR1000 chips from ADI. At 6 GHz, CoMET-extracted gain and phase are accurate to within 0.2 dB and 3 degree compared to network-analyzer measurements. We then employ CoMET in a calibration loop to determinate optimum control settings at 6 GHz, outside the 8-16 GHz band for which the array was designed. We achieve seven-bit phase resolution with equalized gain. The root-mean squared gain and phase errors are improved from 0.8 dB and 8 degree before calibration to 0.1 dB and 1.7 degree after calibration.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。