NSTX-U等离子体中碳颗粒破裂减缓的建模
Modeling of carbon pellets disruption mitigation in an NSTX-U plasma
摘要:
使用M3 D-C1在NSTX-U类等离子体中进行单碳颗粒破坏缓解模拟,以支持电磁颗粒注入概念(EPI)。碳烧蚀模型已在M3 D-C1中实现,并使用可用数据进行了测试。为了估计淬灭等离子体所需的碳量,进行了2D模拟,发现如果完全烧蚀,则$1\,$ mm半径的玻璃质碳丸粒中的含量(~ 3.2x10E20个原子)将是足够的。进行了3D模拟,扫描了颗粒速度和平行热导率,以及不同的注射方向和颗粒概念(固体颗粒和壳颗粒)。的热淬火和其他相关的量,这些参数的灵敏度进行了评估。半径为1 mm的固体颗粒在300 m/s或更高的速度下仅部分烧蚀,因此不能完全淬灭等离子体。为了进一步增强烧蚀,还探索了近似于弹丸阵列和壳弹丸概念。3D场线随机化在淬灭等离子体中心和热通量损失方面都起着重要作用,因此与2D情况相比,降低了减轻等离子体所需的碳量。这项研究是NSTX-U和ITER等其他设备中缓解中断的“预测优先”模拟向前迈出的重要一步。
英文摘要:
Single carbon pellet disruption mitigation simulations using M3D-C1 were conducted in an NSTX-U-like plasma to support the electromagnetic pellet injection concept (EPI). A carbon ablation model has been implemented in M3D-C1 and tested with available data. 2D simulations were conducted in order to estimate the amount of carbon needed to quench the plasma, finding that the content in a $1\,$mm radius vitreous carbon pellet (~ 3.2x10E20 atoms) would be enough if it is entirely ablated. 3D simulations were performed, scanning over pellet velocity and parallel thermal conductivity, as well as different injection directions and pellet concepts (solid pellets and shell pellets). The sensitivity of the thermal quench and other related quantities to these parameters has been evaluated. A 1 mm radius solid pellet only partially ablates at velocities of 300 m/s or higher, thus being unable to fully quench the plasma. To further enhance the ablation, approximations to an array of pellets and the shell pellet concept were also explored. 3D field line stochastization plays an important role in both quenching the center of the plasma and in heat flux losses, thus lowering the amount of carbon needed to mitigate the plasma when compared to the 2D case. This study constitutes an important step forward in `predict-first' simulations for disruption mitigation in NSTX-U and other devices, such as ITER.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。