We study theoretically an optical cavity and a parity-time ($\mathcal{PT}$)-symmetric pair of mechanical resonators, where all oscillators are pairwise coupled, forming an optomechanical system with a closed-contour interaction. Due to the presence of both gain and feedback, we explore its stability and the root loci over a wide coupling range. Under the red-sideband pumping and for the so-called $\mathcal{PT}$-unbroken phase it displays a double optomechanically induced transparency (OMIT) for an experimentally realizable parameter set. We show that both the transmission amplitude and the group delay can be continuously steered from the lower transmission window to the upper one by the loop coupling phase which breaks the time-reversal symmetry and introduces a static synthetic gauge field. In the $\mathcal{PT}$-unbroken phase both the gain-bandwidth and delay-bandwidth products remain constant over the full range of the controlling phase. Tunability in transmission and bandwidth still prevails in the $\mathcal{PT}$-broken phase, albeit over a reduced range. In essence, we suggest a simple scheme that grants coupling phase-dependent control of the single and double OMIT phenomena within an effective $\mathcal{PT}$-symmetric optomechanical system.
Optomechanically induced transparency is an important quantum phenomenon in cavity optomechanics. Here, we study the properties of optomechanically induced transparency in the simplest optomechanical system (consisting of one cavity and one mechanical resonator) considering the effect of non-rotating wave approximation (NRWA) that was ignored in previous works. With the NRWA effect, we find the ideal optomechanically induced transparency dip can be easily achieved, and the width of optomechanically induced transparency dip can become very narrow especially in unresolved sideband regime. Finall…
We study optomechanically induced transparency in a microresonator coupled with nanoparticles. By tuning the relative angle of the nanoparticles, exceptional points (EPs) emerge periodically in this system and thus strongly modify both the transmission rate and the group delay of the signal. As a result, controllable slow-to-fast light switching can be achieved by manipulating external nanoparticles. This provides a new way to engineer EP-assisted optomechanical devices for applications in optical communications and signal processing.
In this work we theoretically investigate a hybrid system of two optomechanically coupled resonators, which exhibits induced transparency. This is realized by coupling an optical ring resonator to a toroid. In the semiclassical analyses, the system displays bistabilities, isolated branches (isolas) and self-sustained oscillation dynamics. Furthermore, we find that the induced transparency transparency window sensitively relies on the mechanical motion. Based on this fact, we show that the described system can be used as a weak force detector and the optimal sensitivity can beat the standard qu…
Ground state cooling of massive mechanical objects remains a difficult task restricted by the unresolved mechanical sidebands. We propose an optomechanically-induced-transparency cooling scheme to achieve ground state cooling of mechanical motion without the resolved sideband condition in a pure optomechanical system with two mechanical modes coupled to the same optical cavity mode. We show that ground state cooling is achievable for sideband resolution $ω_{m}/κ$ as low as 0.003. This provides a new route for quantum manipulation of massive macroscopic devices and high-precision measurements.
We propose a potentially practical scheme to precisely measure the charge numbers of small charged objects by optomechanical systems using optomechanically induced transparency (OMIT). In contrast to the conventional measurements based on the noise backaction on the optomechanical systems, our scheme makes use of the small deformation of the mechanical resonator sensitive to the charge number of the nearby charged object, which could achieve the detection of a single charge. The relationship between the charge number and the window width of the OMIT is investigated and the feasibility of the s…
Optomechanically-induced transparency (OMIT) and the associated slowing of light provide the basis for storing photons in nanoscale devices. Here we study OMIT in parity-time (PT)-symmetric microresonators with a tunable gain-to-loss ratio. This system features a reversed, non-amplifying transparency, i.e., an inverted-OMIT. When the gain-to-loss ratio is varied, the system exhibits a transition from a PT-symmetric phase to a broken-PT-symmetric phase. This PT-phase transition results in the reversal of the pump and gain dependence of the transmission rates. Moreover, we show that by tuning th…
We study the optomechanically induced amplification and perfect transparency in a double-cavity optomechanical system. We find if two control lasers with appropriate amplitudes and detunings are applied to drive the system, the phenomenon of optomechanically induced amplification for a probe laser can occur. In addition, perfect optomechanically induced transparency phenomenon, which is robust to mechanical dissipation, can be realized by the same type of drive. These results are very important for signal amplification, light storage, fast light and slow light in the quantum information proces…
We study the dynamics of a driven optomechanical cavity coupled to a charged nanomechanical resonator via Coulomb interaction, in which the tunable double optomechanically induced transparency (OMIT) can be observed from the output field at the probe frequency by controlling the strength of the Coulomb interaction. We calculate the splitting of the two transparency windows, which varies near linearly with the Coulomb coupling strength in a robust way against the cavity decay. Our double-OMIT is much different from previously mentioned double-EIT and can be applied to measure Coulomb coupling s…
In contrast to the optomechanically induced transparency (OMIT) defined conventionally, the inverse OMIT behaves as coherent absorption of the input lights in the optomechanical systems. We characterize a feasible inverse OMIT in a multi-channel fashion with a double-sided optomechanical cavity system coupled to a nearby charged nanomechanical resonator via Coulomb interaction, where two counter-propagating probe lights can be absorbed via one of the channels or even via three channels simultaneously with the assistance of a strong pump light. Under realistic conditions, we demonstrate the exp…
Optical interferometers with suspended mirrors are the archetype of all current audio-frequency gravitational-wave detectors. The radiation pressure interaction between the motion of the mirror and the circulating optical field in such interferometers represents a pristine form of light-matter coupling, largely due to 30 years of effort in developing high quality optical materials with low mechanical dissipation. However, in all current suspended interferometers, the radiation pressure interaction is too weak to be useful as a resource, and too strong to be neglected. Here, we demonstrate a me…
Detecting and weighing the individual nanoparticles is an important approach to study the behavior and properties of single particles. Here we illustrate an effective mass sensing scheme using optomechanical resonator system. Based on the optomechanically induced transparency phenomenon, a Stokes field reference approach is used to sense the mass of the particle on the microresonator. The field intensity of the transmission field will be changed by the effect of the particle which avoids the limits of decay induced spectral width in the resonance shift detection. Exploiting the perturbation me…
Here, we study the controllable optical responses in a two-cavity optomechanical system, especially on the $\mathit{perfect}$ optomechanically induced transparency (OMIT) in the model which has never been studied before. The results show that the perfect OMIT can still occur even with a large mechanical damping rate, and at the perfect transparency window the long-lived slow light can be achieved. In addition, we find that the conversion between the perfect OMIT and optomechanically induced absorption can be easily achieved just by adjusting the driving field strength of the second cavity. We …
A tunable double optomechanically induced transparency (OMIT) with a squeezed field is investigated in a system consisting of an optomechanical cavity coupled to a charged nanomechanical resonator via Coulomb interaction. Such a double OMIT can be achieved by adjusting the strength of the Coulomb interaction, and observed even with a single-photon squeezed field at finite temperature. Since it is robust against the cavity decay, but very sensitive to some parameters, such as the environmental temperature, the model under our consideration can be applied as a quantum thermometer for precision m…
Diamond cavity optomechanical devices hold great promise for quantum technology based on coherent coupling between photons, phonons and spins. These devices benefit from the exceptional physical properties of diamond, including its low mechanical dissipation and optical absorption. However the nanoscale dimensions and mechanical isolation of these devices can make them susceptible to thermo-optic instability when operating at the high intracavity field strengths needed to realize coherent photon--phonon coupling. In this work, we overcome these effects through engineering of the device geometr…
We propose a scheme that can generate tunable optomechanically induced transparency in a hybrid piezooptomechanical cavity system. The system is composed of a high-quality planar distributed Bragg reflector cavity modified with an embedded Gaussian-shaped defect. Moreover, interdigitated transducers are fabricated on the surface of the cavity to generate surface acoustic waves. Under the actuation of the surface acoustic wave, the upper Bragg mirrors can be vibrated as a bulk acoustic resonator, and the distributed Bragg reflector cavity becomes a standard three-level optomechanical system. In…
We demonstrate the analogue of electromagnetically induced transparency in a room temperature cavity optomechanics setup formed by a thin semitransparent membrane within a Fabry-Pérot cavity. Due to destructive interference, a weak probe field is completely reflected by the cavity when the pump beam is resonant with the motional red sideband of the cavity. Under this condition we infer a significant slowing down of light of hundreds of microseconds, which is easily tuned by shifting the membrane along the cavity axis. We also observe the associated phenomenon of electromagnetically induced amp…
Optomechanical systems have been shown both theoretically and experimentally to exhibit an analogon to atomic electromagnetically induced transparency, with sharp transmission features that are controlled by a second laser beam. Here we investigate these effects in the regime where the fundamental nonlinear nature of the optomechanical interaction becomes important. We demonstrate that pulsed transistor-like switching of transmission still works even in this regime. We also show that optomechanically induced transparency at the second mechanical sideband could be a sensitive tool to see first …
We propose a scheme that can generate a tunable double optomechanically induced transparency (OMIT) in a hybrid optomechanical cavity system, in which the mechanical resonator of an optomechanical cavity is coupled to an additional mechanical resonator, and the additional mechanical resonator can be driven by a weak external coherently mechanical driving field. We show that both the intensity and the phase of the the external mechanical driving field can control the propagation of the probe field, including changing the transmission spectrum curve from a double-window to a single-window. Our s…
High-quality microwave amplifiers and notch-filters can be made from microwave optomechanical systems in which a mechanical resonator is coupled to a microwave cavity by radiation pressure. These amplifiers and filters rely on optomechanically induced transparency (OMIT) and absorption (OMIA), respectively. Such devices can amplify microwave signals with large, controllable gain, high dynamic range and very low noise. Furthermore, extremely narrowband filters can be constructed with this technique. We briefly review previous measurements of microwave OMIT and OMIA before reporting our own meas…
Optomechanically induced transparency in the presence of a strong Duffing nonlinearity
Beijing Computational Science Research Center（北京计算科学研究中心）；Department of Physics, Beijing Normal University（北京师范大学物理学院）；Institute of Theoretical Physics, Chinese Academy of Sciences（中国科学院理论物理研究所）；School of Physical Sciences, University of Chinese Academy of Sciences（中国科学院大学物理科学学院）
Cavities with extremely narrow linewidth of 10-100 Hz are required for realizing frequency dependent squeezing to enable gravitational wave detectors to surpass the free mass standard quantum limit over a broad frequency range. Hundred-meter-scale high finesse cavities have been proposed for this purpose. Optomechanically induced transparency (OMIT) enables the creation of optomechanical cavities in which the linewidth limit is set by the extremely narrow linewidth of a high Q factor mechanical resonator. Using an 85mm OMIT cavity with a silicon nitride membrane, we demonstrate a tunable linew…
We theoretically investigate the optomechanically induced transparency (OMIT) phenomenon in a N-cavity optomechanical system doped with a pair of Rydberg atoms with the presence of a strong pump field and a weak probe field applied to the Nth cavity. 2N-1(N<10) number OMIT windows can be observed in the output field when N cavities coupled with N mechanical oscillators, respectively. But, the mechanical oscillators coupled with different even-odd label cavities lead to different effect on OMIT. On the other hand, two additional transparent windows (extra resonances) are presented, if two Rydbe…
Slow and fast light is an important and fascinating phenomenon in quantum optics. Here, we theoretically study how to achieve the ultraslow and ultrafast light in a passive-active optomechanical system, based on the ideal optomechanically induced transparency (OMIT). Under the conditions of the ideal OMIT, an abnormal (inverted) transparency window will emerge accompanied with a very steep dispersion, resulting that the ultraslow light can be easily achieved at the transparency window by adjusting the dissipation rates of the two cavities, even with usual mechanical linewidth (such as Hz linew…
The search for new control methods over light-matter interactions is one of the engines that advances fundamental physics and applied science alike. A specific class of light-matter interaction interfaces are setups coupling photons of distinct frequencies via matter. Such devices, nontrivial in design, could be endowed with multifunctional tasking. Here we envisage for the first time an optomechanical system that bridges optical and robust, high-frequency x-ray photons, which are otherwise notoriously difficult to control. The x-ray-optical system comprises of an optomechanical cavity and a m…
We study tunable optomechanically induced transparency by controlling the dark-mode effect induced by two mechanical modes coupled to a common cavity field. This is realized by introducing a phase-dependent phonon-exchange interaction, which is used to form a loop-coupled configuration. Combining this phase-dependent coupling with the optomechanical interactions, the dark-mode effect can be controlled by the quantum interference effect. In particular, the dark-mode effect in this two-mechanical-mode optomechanical system can lead to a double-amplified optomechanically induced transparency (OMI…
We present a scheme for cooling mechanical motion to the ground state in an optomechanical system. Unlike standard sideband cooling, this scheme applies to the so-called unresolved sideband regime, where the resonance frequency of the mechanical mode is much smaller than the cavity linewidth. Ground state cooling becomes possible when assuming the presence of an additional, auxiliary mechanical mode and exploiting the effect of optomechanically induced transparency. We first consider a system where one optical cavity interacts with two mechanical modes, and show that ground state cooling of th…
Coherent interaction of laser radiation with multilevel atoms and molecules can lead to quantum interference in the electronic excitation pathways. A prominent example observed in atomic three-level-systems is the phenomenon of electromagnetically induced transparency (EIT), in which a control laser induces a narrow spectral transparency window for a weak probe laser beam. The concomitant rapid variation of the refractive index in this spectral window can give rise to dramatic reduction of the group velocity of a propagating pulse of probe light. Dynamic control of EIT via the control laser en…
We analytically study the optomechanically induced transparency (OMIT) in the $N$-cavity system with the \textit{N}th cavity driven by pump, probing laser fields and the \textit{1}st cavity coupled to mechanical oscillator. We also consider that one atom could be trapped in the \textit{i}th cavity. Instead of only illustrating the OMIT in such a system, we are interested in how the number of OMIT windows is influenced by the cavities and the atom and what roles the atom could play in different cavities. In the resolved sideband regime, we find that, the number of cavities precisely determines …
We propose a scheme that is able to generate the microwave controlled optical double optome-chanical induced transparency (OMIT) in a hybrid piezo-optomechanical cavity system, which a piezoelectric optomechanical crystal AlN-nanobeam resonator is placed in a superconducting microwave cavity, and the AlN-nanobeam resonator can be simultaneously driven by both the optical field via the radiation pressure and the microwave field via the piezoelectric interaction. We show that in the presence of a strong pumped optical field applied to the optomechanical crystal cavity through the optical wavegui…
We study optomechanically induced transparency (OMIT) in a compound system consisting of coupled optical resonators and a mechanical mode, focusing on the unconventional role of loss. We find that optical transparency can emerge at the otherwise strongly absorptive regime in the OMIT spectrum, by using an external nanotip to enhance the optical loss. In particular, loss-induced revival of optical transparency and the associated slow-to-fast light switch can be identified in the vicinity of an exceptional point. These results open up a counterintuitive way to engineer micro-mechanical devices w…
Slow light propagation is an important phenomenon in quantum optics. Here, we theoretically study the properties of slow light in a simple optomechanical system considering an effect of non-rotating wave approximation (NRWA) that was ignored in previous related works. With the NRWA effect, the ultraslow light can be easily achieved at the window of optomechanically induced transparency, especially in unresolved sideband regime. From the theoretical results, we find the upper bound of the time delay is exactly the mechanical ringdown time which can last for \textit{several minutes} (mHz linewid…
We study optomechanically-induced transparency (OMIT) in a compound system consisting of an optical cavity and an acoustic molecule, which features not only double OMIT peaks but also light advance. We find that by selectively driving one of the acoustic modes, OMIT peaks can be amplified either symmetrically or asymmetrically, accompanied by either significantly enhanced advance or a transition from advance to delay of the signal light. The sensitive impacts of the mechanical driving fields on the optical properties, including the signal transition and its high-order sidebands, are also revea…
We investigate the optical response of a hybrid electro-optomechanical system interacting with a qubit. In our experimentally feasible system, tunable all-optical-switching, double-optomechanically induced transparency (OMIT) and optomechanically induced absorption (OMIA) can be realized. The proposed system is also shown to generate anomalous dispersion. Based on our theoretical results, we provide a tunable switch between OMIT and OMIA of the probe field by manipulating the relevant system parameters. Also, the normal-mode-splitting (NMS) effect induced by the interactions between the subsys…
Although people have already artificially formed parity--time ($\mathcal{PT}$) symmetry with gain and loss in a balanced manner, it is still a defect that the gain is restricted to semi--classical but not full quantum. Here we propose and analyze a theoretical scheme to realize full quantum oscillator $\mathcal{PT}$--symmetry. The quantum gain is provided by a dissipation optical cavity with blue detuned laser field. After adiabatically eliminating the cavity modes, we give an effective master equation, which is a more complete quantum description compared with non--Hermitian Hamiltonian, to r…
We propose using optomechanical interaction to narrow the bandwidth of filter cavities for achieving frequency-dependent squeezing in advanced gravitational-wave detectors, inspired by the idea of optomechanically induced transparency. This not only allows us to achieve narrow bandwidth, comparable to the detection band of few hundred Hz, with tabletop optical cavities, but also to tune the bandwidth over a wide range, which is ideal for optimizing sensitivity for different gravitational-wave sources. The experimental challenge for its implementation is the stringent requirement on low thermal…
Three-level quantum systems have formed a cornerstone of quantum optics since the discovery of coherent population trapping (CPT) and electromagnetically induced transparency. Key to these phenomena is quantum interference, which arises if two of the three available transitions are coherently driven at well-controlled amplitudes and phases. The additional coherent driving of the third available transition would form a closed-contour interaction (CCI) from which fundamentally new phenomena would emerge, including phase-controlled CPT and one atom interferometry. However, due to the difficulty i…
We study the energy-level evolution and ground-state cooling of mechanical resonators under a synthetic phononic gauge field. The tunable gauge phase is mediated by the phase difference between the $\mathcal{PT}$- and anti-$\mathcal{PT}$-symmetric mechanical couplings in a multimode optomechanical system. The transmission spectrum then exhibits the asymmetric Fano line shape or double optomechanically induced transparency by modulating the gauge phase. Moreover, the eigenvalues will collapse and become degenerate although the mechanical coupling is continuously increased. Such counterintuitive…
