Ground state cooling of massive mechanical objects remains a difficult task restricted by the unresolved mechanical sidebands. We propose an optomechanically-induced-transparency cooling scheme to achieve ground state cooling of mechanical motion without the resolved sideband condition in a pure optomechanical system with two mechanical modes coupled to the same optical cavity mode. We show that ground state cooling is achievable for sideband resolution $ω_{m}/κ$ as low as 0.003. This provides a new route for quantum manipulation of massive macroscopic devices and high-precision measurements.
Optomechanically induced transparency is an important quantum phenomenon in cavity optomechanics. Here, we study the properties of optomechanically induced transparency in the simplest optomechanical system (consisting of one cavity and one mechanical resonator) considering the effect of non-rotating wave approximation (NRWA) that was ignored in previous works. With the NRWA effect, we find the ideal optomechanically induced transparency dip can be easily achieved, and the width of optomechanically induced transparency dip can become very narrow especially in unresolved sideband regime. Finall…
We study optomechanically induced transparency in a microresonator coupled with nanoparticles. By tuning the relative angle of the nanoparticles, exceptional points (EPs) emerge periodically in this system and thus strongly modify both the transmission rate and the group delay of the signal. As a result, controllable slow-to-fast light switching can be achieved by manipulating external nanoparticles. This provides a new way to engineer EP-assisted optomechanical devices for applications in optical communications and signal processing.
In this work we theoretically investigate a hybrid system of two optomechanically coupled resonators, which exhibits induced transparency. This is realized by coupling an optical ring resonator to a toroid. In the semiclassical analyses, the system displays bistabilities, isolated branches (isolas) and self-sustained oscillation dynamics. Furthermore, we find that the induced transparency transparency window sensitively relies on the mechanical motion. Based on this fact, we show that the described system can be used as a weak force detector and the optimal sensitivity can beat the standard qu…
Optomechanically-induced transparency (OMIT) and the associated slowing of light provide the basis for storing photons in nanoscale devices. Here we study OMIT in parity-time (PT)-symmetric microresonators with a tunable gain-to-loss ratio. This system features a reversed, non-amplifying transparency, i.e., an inverted-OMIT. When the gain-to-loss ratio is varied, the system exhibits a transition from a PT-symmetric phase to a broken-PT-symmetric phase. This PT-phase transition results in the reversal of the pump and gain dependence of the transmission rates. Moreover, we show that by tuning th…
We study the dynamics of a driven optomechanical cavity coupled to a charged nanomechanical resonator via Coulomb interaction, in which the tunable double optomechanically induced transparency (OMIT) can be observed from the output field at the probe frequency by controlling the strength of the Coulomb interaction. We calculate the splitting of the two transparency windows, which varies near linearly with the Coulomb coupling strength in a robust way against the cavity decay. Our double-OMIT is much different from previously mentioned double-EIT and can be applied to measure Coulomb coupling s…
In contrast to the optomechanically induced transparency (OMIT) defined conventionally, the inverse OMIT behaves as coherent absorption of the input lights in the optomechanical systems. We characterize a feasible inverse OMIT in a multi-channel fashion with a double-sided optomechanical cavity system coupled to a nearby charged nanomechanical resonator via Coulomb interaction, where two counter-propagating probe lights can be absorbed via one of the channels or even via three channels simultaneously with the assistance of a strong pump light. Under realistic conditions, we demonstrate the exp…
Optical interferometers with suspended mirrors are the archetype of all current audio-frequency gravitational-wave detectors. The radiation pressure interaction between the motion of the mirror and the circulating optical field in such interferometers represents a pristine form of light-matter coupling, largely due to 30 years of effort in developing high quality optical materials with low mechanical dissipation. However, in all current suspended interferometers, the radiation pressure interaction is too weak to be useful as a resource, and too strong to be neglected. Here, we demonstrate a me…
Detecting and weighing the individual nanoparticles is an important approach to study the behavior and properties of single particles. Here we illustrate an effective mass sensing scheme using optomechanical resonator system. Based on the optomechanically induced transparency phenomenon, a Stokes field reference approach is used to sense the mass of the particle on the microresonator. The field intensity of the transmission field will be changed by the effect of the particle which avoids the limits of decay induced spectral width in the resonance shift detection. Exploiting the perturbation me…
Here, we study the controllable optical responses in a two-cavity optomechanical system, especially on the $\mathit{perfect}$ optomechanically induced transparency (OMIT) in the model which has never been studied before. The results show that the perfect OMIT can still occur even with a large mechanical damping rate, and at the perfect transparency window the long-lived slow light can be achieved. In addition, we find that the conversion between the perfect OMIT and optomechanically induced absorption can be easily achieved just by adjusting the driving field strength of the second cavity. We …
A tunable double optomechanically induced transparency (OMIT) with a squeezed field is investigated in a system consisting of an optomechanical cavity coupled to a charged nanomechanical resonator via Coulomb interaction. Such a double OMIT can be achieved by adjusting the strength of the Coulomb interaction, and observed even with a single-photon squeezed field at finite temperature. Since it is robust against the cavity decay, but very sensitive to some parameters, such as the environmental temperature, the model under our consideration can be applied as a quantum thermometer for precision m…
Diamond cavity optomechanical devices hold great promise for quantum technology based on coherent coupling between photons, phonons and spins. These devices benefit from the exceptional physical properties of diamond, including its low mechanical dissipation and optical absorption. However the nanoscale dimensions and mechanical isolation of these devices can make them susceptible to thermo-optic instability when operating at the high intracavity field strengths needed to realize coherent photon--phonon coupling. In this work, we overcome these effects through engineering of the device geometr…
We study theoretically an optical cavity and a parity-time ($\mathcal{PT}$)-symmetric pair of mechanical resonators, where all oscillators are pairwise coupled, forming an optomechanical system with a closed-contour interaction. Due to the presence of both gain and feedback, we explore its stability and the root loci over a wide coupling range. Under the red-sideband pumping and for the so-called $\mathcal{PT}$-unbroken phase it displays a double optomechanically induced transparency (OMIT) for an experimentally realizable parameter set. We show that both the transmission amplitude and the gro…
We propose a scheme that can generate tunable optomechanically induced transparency in a hybrid piezooptomechanical cavity system. The system is composed of a high-quality planar distributed Bragg reflector cavity modified with an embedded Gaussian-shaped defect. Moreover, interdigitated transducers are fabricated on the surface of the cavity to generate surface acoustic waves. Under the actuation of the surface acoustic wave, the upper Bragg mirrors can be vibrated as a bulk acoustic resonator, and the distributed Bragg reflector cavity becomes a standard three-level optomechanical system. In…
We propose a scheme that can generate a tunable double optomechanically induced transparency (OMIT) in a hybrid optomechanical cavity system, in which the mechanical resonator of an optomechanical cavity is coupled to an additional mechanical resonator, and the additional mechanical resonator can be driven by a weak external coherently mechanical driving field. We show that both the intensity and the phase of the the external mechanical driving field can control the propagation of the probe field, including changing the transmission spectrum curve from a double-window to a single-window. Our s…
High-quality microwave amplifiers and notch-filters can be made from microwave optomechanical systems in which a mechanical resonator is coupled to a microwave cavity by radiation pressure. These amplifiers and filters rely on optomechanically induced transparency (OMIT) and absorption (OMIA), respectively. Such devices can amplify microwave signals with large, controllable gain, high dynamic range and very low noise. Furthermore, extremely narrowband filters can be constructed with this technique. We briefly review previous measurements of microwave OMIT and OMIA before reporting our own meas…
Optomechanically induced transparency in the presence of a strong Duffing nonlinearity
Beijing Computational Science Research Center（北京计算科学研究中心）；Department of Physics, Beijing Normal University（北京师范大学物理学院）；Institute of Theoretical Physics, Chinese Academy of Sciences（中国科学院理论物理研究所）；School of Physical Sciences, University of Chinese Academy of Sciences（中国科学院大学物理科学学院）
We theoretically investigate the optomechanically induced transparency (OMIT) phenomenon in a N-cavity optomechanical system doped with a pair of Rydberg atoms with the presence of a strong pump field and a weak probe field applied to the Nth cavity. 2N-1(N<10) number OMIT windows can be observed in the output field when N cavities coupled with N mechanical oscillators, respectively. But, the mechanical oscillators coupled with different even-odd label cavities lead to different effect on OMIT. On the other hand, two additional transparent windows (extra resonances) are presented, if two Rydbe…
Slow and fast light is an important and fascinating phenomenon in quantum optics. Here, we theoretically study how to achieve the ultraslow and ultrafast light in a passive-active optomechanical system, based on the ideal optomechanically induced transparency (OMIT). Under the conditions of the ideal OMIT, an abnormal (inverted) transparency window will emerge accompanied with a very steep dispersion, resulting that the ultraslow light can be easily achieved at the transparency window by adjusting the dissipation rates of the two cavities, even with usual mechanical linewidth (such as Hz linew…
The search for new control methods over light-matter interactions is one of the engines that advances fundamental physics and applied science alike. A specific class of light-matter interaction interfaces are setups coupling photons of distinct frequencies via matter. Such devices, nontrivial in design, could be endowed with multifunctional tasking. Here we envisage for the first time an optomechanical system that bridges optical and robust, high-frequency x-ray photons, which are otherwise notoriously difficult to control. The x-ray-optical system comprises of an optomechanical cavity and a m…
We study tunable optomechanically induced transparency by controlling the dark-mode effect induced by two mechanical modes coupled to a common cavity field. This is realized by introducing a phase-dependent phonon-exchange interaction, which is used to form a loop-coupled configuration. Combining this phase-dependent coupling with the optomechanical interactions, the dark-mode effect can be controlled by the quantum interference effect. In particular, the dark-mode effect in this two-mechanical-mode optomechanical system can lead to a double-amplified optomechanically induced transparency (OMI…
We analytically study the optomechanically induced transparency (OMIT) in the $N$-cavity system with the \textit{N}th cavity driven by pump, probing laser fields and the \textit{1}st cavity coupled to mechanical oscillator. We also consider that one atom could be trapped in the \textit{i}th cavity. Instead of only illustrating the OMIT in such a system, we are interested in how the number of OMIT windows is influenced by the cavities and the atom and what roles the atom could play in different cavities. In the resolved sideband regime, we find that, the number of cavities precisely determines …
We propose a scheme that is able to generate the microwave controlled optical double optome-chanical induced transparency (OMIT) in a hybrid piezo-optomechanical cavity system, which a piezoelectric optomechanical crystal AlN-nanobeam resonator is placed in a superconducting microwave cavity, and the AlN-nanobeam resonator can be simultaneously driven by both the optical field via the radiation pressure and the microwave field via the piezoelectric interaction. We show that in the presence of a strong pumped optical field applied to the optomechanical crystal cavity through the optical wavegui…
We study optomechanically induced transparency (OMIT) in a compound system consisting of coupled optical resonators and a mechanical mode, focusing on the unconventional role of loss. We find that optical transparency can emerge at the otherwise strongly absorptive regime in the OMIT spectrum, by using an external nanotip to enhance the optical loss. In particular, loss-induced revival of optical transparency and the associated slow-to-fast light switch can be identified in the vicinity of an exceptional point. These results open up a counterintuitive way to engineer micro-mechanical devices w…
We theoretically study high-order optomechanically-induced transparency (OMIT) process in a nonlinear Kerr resonator. A frequency shift induced by the Kerr effect, is identified for the optical cavity mode, which results in asymmetric OMIT windows of the signal and its higher-order sidebands. We also find that both the sideband amplitude and its associated group delay sensitively depend on the strength of the Kerr nonlinearity. This indicates the possibility to enhance or steer the performance of OMIT devices with various nonlinear optical cavities.
Slow light propagation is an important phenomenon in quantum optics. Here, we theoretically study the properties of slow light in a simple optomechanical system considering an effect of non-rotating wave approximation (NRWA) that was ignored in previous related works. With the NRWA effect, the ultraslow light can be easily achieved at the window of optomechanically induced transparency, especially in unresolved sideband regime. From the theoretical results, we find the upper bound of the time delay is exactly the mechanical ringdown time which can last for \textit{several minutes} (mHz linewid…
We study optomechanically-induced transparency (OMIT) in a compound system consisting of an optical cavity and an acoustic molecule, which features not only double OMIT peaks but also light advance. We find that by selectively driving one of the acoustic modes, OMIT peaks can be amplified either symmetrically or asymmetrically, accompanied by either significantly enhanced advance or a transition from advance to delay of the signal light. The sensitive impacts of the mechanical driving fields on the optical properties, including the signal transition and its high-order sidebands, are also revea…
Non-reciprocal devices, with one-way transport properties, form a key component for isolating and controlling light in photonic systems. Optomechanical systems have emerged as a potential platform for optical non-reciprocity, due to ability of a pump laser to break time and parity symmetry in the system. Here we consider how the non-reciprocal behavior of light can also impact the transport of sound in optomechanical devices. We focus on the case of a quasi one dimensional optical ring resonator with many mechanical modes coupled to light via the acousto-optic effect. The addition of disorder …
Imposing chirality on a physical system engenders unconventional energy flow and responses, such as the Aharonov-Bohm effect and the topological quantum Hall phase for electrons in a symmetry-breaking magnetic field. Recently, great interest has arisen in combining that principle with broken Hermiticity to explore novel topological phases and applications. Here, we report unique phononic states formed when combining the controlled breaking of time-reversal symmetry with non-Hermitian dynamics, both induced through time-modulated radiation pressure forces in small nano-optomechanical networks. …
We theoretically study a strongly-driven optomechanical system which consists of a passive optical cavity and an active mechanical resonator. When the optomechanical coupling strength is varied, phase transitions, which are similar those observed in $\mathcal{PT}$-symmetric systems, are observed. We show that the optical transmission can be controlled by changing the gain of the mechanical resonator and loss of the optical cavity mode. Especially, we find that: (i) for balanced gain and loss, optical amplification and absorption can be tuned by changing the optomechanical coupling strength thr…
We investigate the optical response of a hybrid electro-optomechanical system interacting with a qubit. In our experimentally feasible system, tunable all-optical-switching, double-optomechanically induced transparency (OMIT) and optomechanically induced absorption (OMIA) can be realized. The proposed system is also shown to generate anomalous dispersion. Based on our theoretical results, we provide a tunable switch between OMIT and OMIA of the probe field by manipulating the relevant system parameters. Also, the normal-mode-splitting (NMS) effect induced by the interactions between the subsys…
We theoretically propose a scheme for the generation of a non-classical single-mode motional state of a mechanical resonator (MR) in the three-mode optomechanical systems, in which two optical modes of the cavities are linearly coupled to each other and one mechanical mode of the MR is optomechanically coupled to the two optical modes with the same coupling strength simultaneously. One cavity is driven by a coherent laser light. By properly tuning the frequency of the weak driving field, we obtain engineered Liouvillian superoperator via engineering the selective interaction Hamiltonian confin…
We investigate theoretically in detail the non-linear effects in the response of an optical/microwave cavity coupled to a Duffing mechanical resonator. The cavity is driven by a laser at a red or blue mechanical subband, and a probe laser measures the reflection close to the cavity resonance. Under these conditions, we find that the cavity exhibits optomechanically induced reflection (OMIR) or absorption (OMIA) and investigate the optomechanical response in the limit of non-linear driving of the mechanics. Similar to linear mechanical drive, an overcoupled cavity the red-sideband drive may lea…
We discuss level splitting and sideband transitions induced by a modulated coupling between a superconducting quantum circuit and a nanomechanical resonator. First, we show how to achieve an unconventional time-dependent longitudinal coupling between a flux (transmon) qubit and the resonator. Considering a sinusoidal modulation of the coupling strength, we find that a first-order sideband transition can be split into two. Moreover, under the driving of a red-detuned field, we discuss the optical response of the qubit for a resonant probe field. We show that level splitting induced by modulatin…
We theoretically study photon transmission and mechanical ground state cooling in a two-dimensional optomechanical system that is formed of a suspended graphene sheet on an one-dimensional optomechanical crystal. When the frequencies of graphene resonator and nanobeam resonator(phononic mode of optomechanical crystal) are approximately the same, the $Λ$-type degenerate four-level system of two-dimensional optomechanics shows two-color optomechanically-induced transparency , and the transparency window could be switched among probe signal's absorption, transparency, and amplification. According…
