arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2103.11730cs.SDcs.CEeess.AS
收藏

带参数化边界的室内声学数值模拟的降基方法

Reduced basis methods for numerical room acoustic simulations with parametrized boundaries

Technical University of Denmark(丹麦技术大学);Treble Technologies(特雷布尔科技公司);Ecole Polytechnique Federale de Lausanne(洛桑联邦理工学院)

Hermes Sampedro Llopis, Allan P. Engsig-Karup, Cheol-Ho Jeong, Finnur Pind, Jan S. Hesthaven

AI总结:

针对室内声学多参数数值模拟计算成本高的问题,提出基于拉普拉斯域的降基方法,结合谱元法全阶模型,可实现百至千倍加速,存储需求可承受。

摘要:

在工程应用中,基于模型的室内声波传播数值模拟需要迭代评估多参数下的声学条件,这一过程计算成本高昂。我们提出一种降基方法(reduced basis methods, RBM),针对带参数化边界条件的基于波动的室内声学模拟,相比传统全阶模型(full order model, FOM)实现计算成本降低。本研究中的FOM求解器基于谱元法,但也可采用其他数值方法。RBM通过在低维子空间中求解与频率无关及与频率相关的参数化边界条件问题,来减轻计算负担。该问题在拉普拉斯域中构建并求解,可确保基于RBM方法的降阶模型稳定性。我们研究了所提出的RBM框架在计算效率、精度和存储需求方面的潜力,结果表明:对于上限频率为2kHz的二维案例,RBM可实现100倍的加速;对于上限频率为1kHz的同类三维案例,加速比约为1000倍。尽管构建降阶模型(reduced order model, ROM)所需的FOM模拟成本较高,但我们证明,即便存在这一成本,当每个房间表面模拟4种不同边界条件时,ROM的速度仍有望比FOM快三个数量级。此外,结果显示ROM的存储模型需求相对较高,但对于本研究提出的二维和三维案例而言是可承受的。

英文摘要:

The use of model-based numerical simulation of wave propagation in rooms for engineering applications requires that acoustic conditions for multiple parameters are evaluated iteratively and this is computationally expensive. We present a reduced basis methods (RBM) to achieve a computational cost reduction relative to a traditional full order model (FOM), for wave-based room acoustic simulations with parametrized boundary conditions. In this study, the FOM solver is based on the spectral element method, however other numerical methods could be applied. The RBM reduces the computational burden by solving the problem in a low-dimensional subspace for parametrized frequency-independent and frequency-dependent boundary conditions. The problem is formulated and solved in the Laplace domain, which ensures the stability of the reduced order model based on the RBM approach. We study the potential of the proposed RBM framework in terms of computational efficiency, accuracy and storage requirements and we show that the RBM leads to 100-fold speed-ups for a 2D case with an upper frequency of 2kHz and around 1000-fold speed-ups for an analogous 3D case with an upper frequency of 1kHz. While the FOM simulations needed to construct the ROM are expensive, we demonstrate that despite this cost, the ROM has a potential of three orders of magnitude faster than the FOM when four different boundary conditions are simulated per room surface. Moreover, results show that the storage model for the ROM is relatively high but affordable for the presented 2D and 3D cases.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑