To optimally cover users in millimeter-Wave (mmWave) networks, clustering is needed to identify the number and direction of beams. The mobility of users motivates the need for an online clustering scheme to maintain up-to-date beams towards those clusters. Furthermore, mobility of users leads to varying patterns of clusters (i.e., users move from the coverage of one beam to another), causing dynamic traffic load per beam. As such, efficient radio resource allocation and beam management is needed to address the dynamicity that arises from mobility of users and their traffic. In this paper, we consider the coexistence of Ultra-Reliable Low-Latency Communication (URLLC) and enhanced Mobile BroadBand (eMBB) users in 5G mmWave networks and propose a Quality-of-Service (QoS) aware clustering and resource allocation scheme. Specifically, Density-Based Spatial Clustering of Applications with Noise (DBSCAN) is used for online clustering of users and the selection of the number of beams. In addition, Long Short Term Memory (LSTM)-based Deep Reinforcement Learning (DRL) scheme is used for resource block allocation. The performance of the proposed scheme is compared to a baseline that uses K-means and priority-based proportional fairness for clustering and resource allocation, respectively. Our simulation results show that the proposed scheme outperforms the baseline algorithm in terms of latency, reliability, and rate of URLLC users as well as rate of eMBB users.
The work presented in this paper deals with the issue of massive demands for higher capacity. For that matter, we investigate the spectrum resource management in outdoor mmWave cell for the uplink of cellular and D2D communications. Indeed, we provide a first insight how to optimize the system performance in terms of achievable throughput while realizing a compromise between the large number of admitted devices and the generated interference constraint. We propose a mathematical formulation of the optimization objective which falls in the mixed integer-real optimization scheme. To overcome its…
Mmwave bands are being widely touted as a very promising option for future 5G networks, especially in enabling such networks to meet highly demanding rate requirements. Accordingly, the usage of these bands is also receiving an increasing interest in the context of 5G vehicular networks, where it is expected that connected cars will soon need to transmit and receive large amounts of data. Mmwave communications, however, require the link to be established using narrow directed beams, to overcome harsh propagation conditions. The advanced antenna systems enabling this also allow for a complex be…
The next generation of cellular networks will exploit mmWave frequencies to dramatically increase the network capacity. The communication at such high frequencies, however, requires directionality to compensate the increase in propagation loss. Users and base stations need to align their beams during both initial access and data transmissions, to ensure the maximum gain is reached. The accuracy of the beam selection, and the delay in updating the beam pair or performing initial access, impact the end-to-end performance and the quality of service. In this paper we will present the beam manageme…
The millimeter wave (mmWave) frequencies offer the availability of huge bandwidths to provide unprecedented data rates to next-generation cellular mobile terminals. However, mmWave links are highly susceptible to rapid channel variations and suffer from severe free-space pathloss and atmospheric absorption. To address these challenges, the base stations and the mobile terminals will use highly directional antennas to achieve sufficient link budget in wide area networks. The consequence is the need for precise alignment of the transmitter and the receiver beams, an operation which may increase …
Millimeter-wave (mmwave) communication represents a potential solution to capacity shortage in vehicular networks. However, effective beam alignment between senders and receivers requires accurate knowledge of the vehicles' position for fast beam steering, which is often impractical to obtain in real time. We address this problem by leveraging the traffic signals regulating vehicular mobility: as an example, we may coordinate beams with red traffic lights, as they correspond to higher vehicle densities and lower speeds. To evaluate our intuition, we propose a tractable, yet accurate, mmwave co…
For millimeter-wave networks, this paper presents a paradigm shift for leveraging time-consecutive camera images in handover decision problems. While making handover decisions, it is important to predict future long-term performance---e.g., the cumulative sum of time-varying data rates---proactively to avoid making myopic decisions. However, this study experimentally notices that a time-variation in the received powers is not necessarily informative for proactively predicting the rapid degradation of data rates caused by moving obstacles. To overcome this challenge, this study proposes a proac…
Millimeter wave (mmWave) communication has attracted increasing attention as a promising technology for 5G networks. One of the key architectural features of mmWave is the use of massive antenna arrays at both the transmitter and the receiver sides. Therefore, by employing directional beamforming (BF), both mmWave base stations (MBSs) and mmWave users (MUEs) are capable of supporting multi-beam simultaneous transmissions. However, most researches have only considered a single beam, which means that they do not make full potential of mmWave. In this context, in order to improve the performance …
Network management is a fundamental ingredient for efficient operation of wireless networks. With increasing bandwidth, number of antennas and number of users, the amount of information required for network management increases significantly. Therefore, distributed network management is a key to efficient operation of future networks. This paper focuses on the problem of distributed joint beamforming control and power allocation in ad-hoc mmWave networks. Over the shared spectrum, a number of multi-input-multi-output links attempt to minimize their supply power by simultaneously finding the lo…
This paper proposes a cellular network exploiting millimeter-wave (mmWave) and ultra-densified base stations (BSs) to achieve the far-reaching 5G aim in downlink average rate. The mmWave overlaid network however incurs a pitfall that its ample data rate is only applicable for downlink transmissions due to the implementation difficulty at mobile users, leading to an immense difference between uplink and downlink rates. We therefore turn our attention not only to maximize downlink rate but also to ensure the minimum uplink rate. With this end, we firstly derive the mmWave overlaid ultra-dense ce…
Highly directional millimeter wave (mmWave) radios need to perform beam management to establish and maintain reliable links. To do so, existing solutions mostly rely on explicit coordination between the transmitter (TX) and the receiver (RX), which significantly reduces the airtime available for communication and further complicates the network protocol design. This paper advances the state of the art by presenting DeepBeam, a framework for beam management that does not require pilot sequences from the TX, nor any beam sweeping or synchronization from the RX. This is achieved by inferring (i) …
Green Vehicular Ad-hoc Network (VANET) is a newly-emerged research area which focuses on reducing harmful impacts of vehicular communication equipments on the natural environment. Recent studies have shown that grouping vehicles into clusters for green communications in VANETs can significantly improve networking efficiency and reduce infrastructure costs. As a dynamic network system, maintaining the network connectivity and reducing the communication overlap are two critical challenges for green VANET clustering. However, most existing work studies connectivity and overlap separately, lacking…
Millimeter-wave communication is widely seen as a promising option to increase the capacity of vehicular networks, where it is expected that connected cars will soon need to transmit and receive large amounts of data. Due to harsh propagation conditions, mmWave systems resort to narrow beams to serve their users, and such beams need to be configured according to traffic demand and its spatial distribution, as well as interference. In this work, we address the beam management problem, considering an urban vehicular network composed of gNBs. We first build an accurate, yet tractable, system mode…
The exponential rise in mobile traffic originating from mobile devices highlights the need for making mobility management in future networks even more efficient and seamless than ever before. Ultra-Dense Cellular Network vision consisting of cells of varying sizes with conventional and mmWave bands is being perceived as the panacea for the eminent capacity crunch. However, mobility challenges in an ultra-dense heterogeneous network with motley of high frequency and mmWave band cells will be unprecedented due to plurality of handover instances, and the resulting signaling overhead and data inte…
The millimeter wave (mmWave) frequencies offer the availability of huge bandwidths to provide unprecedented data rates to next-generation cellular mobile terminals. However, directional mmWave links are highly susceptible to rapid channel variations and suffer from severe isotropic pathloss. To face these impairments, this paper addresses the issue of tracking the channel quality of a moving user, an essential procedure for rate prediction, efficient handover and periodic monitoring and adaptation of the user's transmission configuration. The performance of an innovative tracking scheme, in wh…
In millimeter-wave communication, digital beamsteering (DBS), only based on the user direction, is a promising angle-domain multi-antenna technique to mitigate the severe path loss and multiuser interference, with low-complexity and partial channel state information (CSI). In this paper, we design a power-domain non-orthogonal multiple access (NOMA) scheme that enhances the DBS performance trading-off complexity , energy-consumption and capacity performance. In particular, we propose a user-clustering algorithm to pair users, based on a geometric-interference metric, so that the inter-user int…
Beam management is central in the operation of dense 5G cellular networks. Focusing the energy radiated to mobile terminals (MTs) by increasing the number of beams per cell increases signal power and decreases interference, and has hence the potential to bring major improvements on area spectral efficiency (ASE). This benefit, however, comes with unavoidable overheads that increase with the number of beams and the MT speed. This paper proposes a first system-level stochastic geometry model encompassing major aspects of the beam management problem: frequencies, antennas, and propagation; physic…
Beam management is central in the operation of beamformed wireless cellular systems such as 5G New Radio (NR) networks. Focusing the energy radiated to mobile terminals (MTs) by increasing the number of beams per cell increases signal power and decreases interference, and has hence the potential to bring major improvements on area spectral efficiency (ASE). This paper proposes a first system-level stochastic geometry model encompassing major aspects of the beam management problem: frequencies, antenna configurations, and propagation; physical layer, wireless links, and coding; network geometry…
The growing adoption of mmWave frequency bands to realize the full potential of 5G, turns beamforming into a key enabler for current and next-generation wireless technologies. Many mmWave networks rely on beam selection with Grid-of-Beams (GoB) approach to handle user-beam association. In beam selection with GoB, users select the appropriate beam from a set of pre-defined beams and the overhead during the beam selection process is a common challenge in this area. In this paper, we propose an Advantage Actor Critic (A2C) learning-based framework to improve the GoB and the beam selection process…
Femtocells represent a promising alternative solution for high quality wireless access in indoor scenarios where conventional cellular system coverage can be poor. Femtocell access points (FAP) are normally randomly deployed by the end user, so only post deployment network planning is possible. Furthermore, this uncoordinated deployment creates the potential for severe interference to co-located femtocells, especially in dense deployments. This paper presents a new femtocell network architecture using a generalized virtual cluster femtocell (GVCF) paradigm, which groups together FAP, which are…
Concordia University（康考迪亚大学）；Nokia Bell Laboratories（诺基亚贝尔实验室）；Texas A&M University at Qatar（德克萨斯农工大学卡塔尔分校）
To establish reliable and long-range millimeter-wave (mmWave) communication, beamforming is deemed to be a promising solution. Although beamforming can be done in the digital and analog domains, both approaches are hindered by several constraints when it comes to mmWave communications. For example, performing fully digital beamforming in mmWave systems involves using many radio frequency (RF) chains, which are expensive and consume high power. This necessitates finding more efficient ways for using fewer RF chains while taking advantage of the large antenna arrays. One way to overcome this cha…
Waseda University（早稻田大学）；University of Guelph（圭尔夫大学）；Birla Institute of Technology, Mesra（梅斯拉贝拉理工学院）
5G edge computing enabled Internet of Medical Things (IoMT) is an efficient technology to provide decentralized medical services while Device-to-device (D2D) communication is a promising paradigm for future 5G networks. To assure secure and reliable communication in 5G edge computing and D2D enabled IoMT systems, this paper presents an intelligent trust cloud management method. Firstly, an active training mechanism is proposed to construct the standard trust clouds. Secondly, individual trust clouds of the IoMT devices can be established through fuzzy trust inferring and recommending. Thirdly,…
This paper presents a comprehensive literature review on applications of economic and pricing theory for resource management in the evolving fifth generation (5G) wireless networks. The 5G wireless networks are envisioned to overcome existing limitations of cellular networks in terms of data rate, capacity, latency, energy efficiency, spectrum efficiency, coverage, reliability, and cost per information transfer. To achieve the goals, the 5G systems will adopt emerging technologies such as massive Multiple-Input Multiple-Output (MIMO), mmWave communications, and dense Heterogeneous Networks (He…
Heterogeneous small cell network has attracted much attention to satisfy users' explosive data traffic requirements. Heterogeneous cloud small cell network (HCSNet), which combines cloud computing and heterogeneous small cell network, will likely play an important role in 5G mobile communication networks. However, with massive deployment of small cells, co-channel interference and handover management are two important problems in HCSNet, especially for cell edge users. In this article, we examine the problems of cooperative interference mitigation and handover management in HCSNet. A network a…
Chongqing University of Posts and Telecommunications（重庆邮电大学）；University of Guelph（圭尔夫大学）
Traditional machine learning techniques have been widely used to establish the trust management systems. However, the scale of training dataset can significantly affect the security performances of the systems, while it is a great challenge to detect malicious nodes due to the absence of labeled data regarding novel attacks. To address this issue, this paper presents a generative adversarial network (GAN) based trust management mechanism for Industrial Wireless Sensor Networks (IWSNs). First, type-2 fuzzy logic is adopted to evaluate the reputation of sensor nodes while alleviating the uncerta…
In wireless sensor networks (WSNs), designing a stable, low-power routing protocol is a major challenge because successive changes in links or breakdowns destabilize the network topology. Therefore, choosing the right route in this type of network due to resource constraints and their operating environment is one of the most important challenges in these networks. Therefore, the main purpose of these networks is to collect appropriate routing information about the environment around the network sensors while observing the energy consumption of the sensors. One of the important approaches to re…
