Industry 4.0 introduces new use cases, with more and more mobile devices appearing in the industrial landscape. These applications require both new technologies and smooth integration into existing brownfield deployments. Emerging mobile use cases can be divided into optional mobile and mandatory mobile, where the first point considers the use of wireless communications due to soft criteria such as cost savings and the second means use cases that cannot be covered by wireline technologies due to their movement, such as AGVs. For most industrial applications, high determinism, E2E latency and synchronicity are most important. Therefore, we provide a common table, based on these requirements, listing both existing and emerging mobile use cases. Since time synchronization is particularly demanding for wireless use cases, we propose a concept for a simple but precise synchronization in IEEE 802.11 WLAN and a suitable integration using TSN in combination with OPC UA technology as examples. Furthermore, the concept is evaluated with the help of a testbed utilizing state-of-the-art hardware. This means that this concept can be directly applied in existing industry solutions. It can be shown that the concept is already suitable for a wide range of the mandatory mobile applications.
Realizing the industrial Internet of Things, more andmore mobile use cases will emerge in the industrial landscape,requiring both novel concepts and smooth integration into legacydeployments.Since accurate time synchronization is particularly challengingfor wireless devices, we propose a concept for simple but accuratesynchronization in IEEE 802.11 wireless local area network thatextends the Reference Broadcast Infrastructure Synchronizationprotocol, and a suitable integration of IEEE 802.1AS that is partof the IEEE time-sensitive networking standards. In addition,the concept is evaluated with…
Industry 4.0 brings up new types of use cases, whereby mobile use cases play a significant role. These use cases have stringent requirements on both automation and communication systems that cannot be achieved with recent shop floor technologies. Therefore, novel technologies such as IEEE time-sensitive networking (TSN) and Open Platform Communications Unified Architecture (OPC UA) are being introduced. In addition, for the realization of mobile use cases, wireline technologies cannot be used and have to be replaced by wireless connections, which have to meet the high demands of the industrial…
Ultra-reliable and low-latency communications (URLLC) is an emerging feature in 5G and beyond wireless systems, which is introduced to support stringent latency and reliability requirements of mission-critical industrial applications. In many potential applications, multiple sensors/actuators collaborate and require isochronous operation with strict and bounded jitter, e.g., \SI{1}{\micro\second}. To this end, network time synchronization becomes crucial for real-time and isochronous communication between a controller and the sensors/actuators. In this paper, we look at different applications …
Industrial control systems present numerous challenges from the communication systems perspective: clock synchronization, deterministic behavior, low latency, high reliability, flexibility, and scalability. These challenges are mostly solved with standard technologies over Ethernet, e.g., Time-Sensitive Networking (TSN). As a research trend, it is expected that TSN will converge with wireless, leading to the Wireless TSN paradigm. Also, Wireless TSN is expected to be integrated with Ethernet TSN to create large-scale wired-wireless (Hybrid) TSN networks. The first step towards Hybrid TSN is th…
Real-time systems rely on a distributed global time base. As any physical clock device suffers from noise, it is necessary to provide some kind of clock synchronization to establish such a global time base. Different clock synchronization methods have been invented for individual application domains. The Precision Time Protocol (PTP), which is specified in IEEE 1588, is another interesting option. It targets local networks, where it is acceptable to assume small amounts of hardware support, and promises sub-microsecond precision. PTP provides many different implementation and configuration opt…
In the above letter, Chin and Chen proposed an IEEE 1588 clock synchronization method based on dual slave clocks, where they claim that multiple unknown parameters --- i.e., clock offset, clock skew, and master-to-slave delay --- can be estimated with only one-way time transfers using more equations than usual. This comment investigates Chin and Chen's dual clock scheme with detailed models for a master and dual slave clocks and shows that the formulation of multi-parameter estimation is invalid, which affirms that it is impossible to distinguish the effect of delay from that of clock offset a…
A major challenge in wide deployment of smart wireless devices, using different technologies and sharing the same 2.4 GHz spectrum, is to achieve coexistence across multiple technologies. The IEEE~802.11 (WLAN) and the IEEE 802.15.4e TSCH (WSN) where designed with different goals in mind and both play important roles for respective applications. However, they cause mutual interference and degraded performance while operating in the same space. To improve this situation we propose an approach to enable a cooperative control which type of network is transmitting at given time, frequency and plac…
Clock synchronization procedures are mandatory in most physical experiments where event fragments are readout by spatially dislocated sensors and must be glued together to reconstruct key parameters (e.g. energy, interaction vertex etc.) of the process under investigation. These distributed data readout topologies rely on an accurate time information available at the frontend, where raw data are acquired and tagged with a precise timestamp prior to data buffering and central data collecting. This makes the network complexity and latency, between frontend and backend electronics, negligible wit…
Industrial wireless sensor networks (WSNs) are being used to improve the efficiency, productivity and safety of industrial processes. An open standard that is commonly used in such cases is IEEE 802.15.4e. Its TSCH mode employs a time synchronized based MAC scheme together with channel hopping to alleviate the impact of channel fading. Until now, most of the industrial WSNs have been designed to only support static nodes and are not able to deal with mobility. In this paper, we show how a single-hop, multi-gateway IEEE 802.15.4e TSCH network architecture can tackle the mobility problem. We int…
Our paper deals with a Dynamic Spectrum Access (DSA) and its implementation on a Software Defined Radio (SDR) for IEEE 802.15.4e Networks. The network nodes select the carrier frequency after Energy-Detection based Spectrum Sensing (SS). To ensure frequency hoping between two nodes in IEEE 802.15.4e Network, we propose a synchronization algorithm. We considerate the IEEE 802.15.4e Network is Secondary User (SU), and all other networks are Primary Users (PUs) in unlicensed 868/915 MHz and 2450 MHz bands of a Cognitive Radio (CR). However, the algorithm and the energy-sensor have been implemente…
5G and 6G wireless communications allow for novel and disruptive applications. While 5G was strongly focused on improvements on QoS and QoS guarantees that are necessary for industrial deployments, 6G will have a disruptive impact on possible use cases. Here, nearly each use case requires time synchronization of the involved systems. While PTP in its variations, e.g. IEEE 1588 v2.1 or IEEE 802.1AS, has established as standard for wireline systems, time synchronization of wireless or hybrid systems is still subject to research. Thus, the so-called RBIS protocol, which was originally developed a…
The IEEE 802.1 time-sensitive networking (TSN) standards aim at improving the real-time capabilities of standard Ethernet. TSN is widely recognized as the long-term replacement of proprietary technologies for industrial control systems. However, wired connectivity alone is not sufficient to meet the requirements of future industrial systems. The fifth-generation (5G) mobile/cellular technology has been designed with native support for ultra-reliable low-latency communication (uRLLC). 5G is promising to meet the stringent requirements of industrial systems in the wireless domain. Converged oper…
Time-Sensitive Networking (TSN) aims to extend the IEEE 802.1Q Ethernet standard with real-time and time-aware capabilities. Each device's transmission of time-critical frames is done according to a so-called Gate Control List (GCL) schedule via the timed-gate mechanism described in IEEE 802.1Qbv. Most schedule generation mechanisms for TSN have a constraining assumption that both switches and end-systems in the network must have at least the TSN capabilities related to scheduled gates and time synchronization. However, many TSN networks use off-the-shelf end-systems, e.g., for providing senso…
Flow reshaping is used in time-sensitive networks (as in the context of IEEE TSN and IETF Detnet) in order to reduce burstiness inside the network and to support the computation of guaranteed latency bounds. This is performed using per-flow regulators (such as the Token Bucket Filter) or interleaved regulators (as with IEEE TSN Asynchronous Traffic Shaping). Both types of regulators are beneficial as they cancel the increase of burstiness due to multiplexing inside the network. It was demonstrated, by using network calculus, that they do not increase the worst-case latency. However, the proper…
Future industrial applications will encompass compelling new use cases requiring stringent performance guarantees over multiple key performance indicators (KPI) such as reliability, dependability, latency, time synchronization, security, etc. Achieving such stringent and diverse service requirements necessitates the design of a special-purpose Industrial Internet of Things (IIoT) network comprising a multitude of specialized functionalities and technological enablers. This article proposes an innovative architecture for such a special-purpose 6G IIoT network incorporating seven functional buil…
