A key challenge for semiconductor quantum-dot charge qubits is the realization of long-range qubit coupling and performing high-fidelity gates based on it. Here, we describe a new type of charge qubit formed by an electron confined in a triple-quantum-dot system, enabling single and two-qubit gates working in the dipolar and quadrupolar detuning sweet spots. We further present the form for the long-range dipolar coupling between the charge qubit and the superconducting resonator. Based on the hybrid system composed of the qubits and the resonator, we present two types of entangling gates: the dynamical iSWAP gate and holonomic entangling gate, which are operating in the dispersive and resonant regimes, respectively. We find that the fidelity for the iSWAP gate can reach fidelity higher than 99\% for the noise level typical in experiments. Meanwhile, the fidelity for the holonomic gate can surpass 98\% if the anharmonicity in the resonator is large enough. Our proposal offers an alternative useful way to build up high-fidelity quantum computation for charge qubits in semiconductor quantum dot.
We present two pulse schemes for actively depleting measurement photons from a readout resonator in the nonlinear dispersive regime of circuit QED. One method uses digital feedback conditioned on the measurement outcome while the other is unconditional. In the absence of analytic forms and symmetries to exploit in this nonlinear regime, the depletion pulses are numerically optimized using the Powell method. We shorten the photon depletion time by more than six inverse resonator linewidths compared to passive depletion by waiting. We quantify the benefit by emulating an ancilla qubit performing…
Spins in semiconductor quantum dots are a candidate for cryogenic quantum processors due to their exceptionally long coherence times. One major challenge to scaling quantum dot spin qubits is the dense wiring requirements, making it difficult to envision fabricating large arrays of nearest-neighbor-coupled qubits necessary for error correction. We describe a method to solve this problem by spacing the qubits out using high-impedance superconducting resonators with a 2D grid unit cell area of $0.16~\text{mm}^2$ using 3D integration. To prove the viability of this approach, we demonstrate 3D int…
We demonstrate room-temperature strong-coupling between a mid-infrared ($λ$=9.9 $μ$m) intersubband transition and the fundamental cavity mode of a metal-insulator-metal resonator. Patterning of the resonator surface enables surface-coupling of the radiation and introduces an energy dispersion which can be probed with angle-resolved reflectivity. In particular, the polaritonic dispersion presents an accessible energy minimum at k=0 where - potentially - polaritons can accumulate. We also show that it is possible to maximize the coupling of photons into the polaritonic states and - simultaneousl…
We analyze a readout scheme for Majorana qubits based on dispersive coupling to a resonator. We consider two variants of Majorana qubits: the Majorana transmon and the Majorana box qubit. In both cases, the qubit-resonator interaction can produce sizeable dispersive shifts in the MHz range for reasonable system parameters, allowing for submicrosecond readout with high fidelity. For Majorana transmons, the light-matter interaction used for readout manifestly conserves Majorana parity, which leads to a notion of quantum nondemolition (QND) readout that is stronger than for conventional charge qu…
We demonstrate high-contrast state detection of a superconducting flux qubit. Detection is realized by probing the microwave transmission of a nonlinear resonator, based on a SQUID. Depending on the driving strength of the resonator, the detector can be operated in the monostable or the bistable mode. The bistable operation combines high-sensitivity with intrinsic latching. The measured contrast of Rabi oscillations is as high as 87 %; of the missing 13 %, only 3 % is unaccounted for. Experiments involving two consecutive detection pulses are consistent with preparation of the qubit state by t…
Strong coupling of semiconductor spin qubits to superconducting microwave resonators was recently demonstrated. These breakthroughs pave the way for quantum information processing that combines the long coherence times of solid-state spin qubits with the long-distance connectivity, fast control, and fast high-fidelity quantum-non-demolition readout of existing superconducting qubit implementations. Here, we theoretically analyze and optimize the dispersive readout of a single spin in a semiconductor double quantum dot (DQD) coupled to a microwave resonator via its electric dipole moment. The s…
Realization of controllable interaction between distant qubits is one of the major problems in scalable solid state quantum computing. We study a superconducting transmission line resonator (TLR) as a tunable dispersive coupler for the double-dot molecules. A general interaction Hamiltonian of $n$ two-electron spin-based qubits and the TLR is presented, where the double-dot qubits are biased at the large detuning region and the TLR is always empty and virtually excited. Our analysis o the main decoherence sources indicates that various major quantum operations can be reliably implemented with …
We experimentally study an optomechanical cavity that is formed between a mechanical resonator, which serves as a movable mirror, and a stationary on-fiber dielectric mirror. A significant change in the behavior of the system is observed when the distance between the fiber's tip and the mechanical resonator is made smaller than about 1 micrometer. The observed effects are attributed to the combined influence of Casimir force, Coulomb interaction due to trapped charges, and optomechanical coupling. The comparison between experimental results and theory yields a partial agreement.
The cooling performance of an optomechanical system comprising both dispersive and dissipative coupling is studied. We present a scheme to cool a mechanical resonator to its ground state in finite time by employing a chirped pulse. When the cavity damping strength increases, the phonon occupation of the resonator will decrease. Moreover, the cooling behaviors of this dispersively and dissipatively coupled system with different incident pulses, different system coupling strengths are explored. Our scheme is feasible to cool the resonator in a wide parameter region.
By spectrally hole burning an inhomogeneously broadened ensemble of ions while applying a controlled perturbation, one can obtain spectral holes that are functionalized for maximum sensitivity to different perturbations. We propose to use such hole burnt structures for the dispersive optical interaction with rare-earth ion dopants whose frequencies are sensitive to crystal strain due to the bending motion of a crystal cantilever. A quantitative analysis shows that good optical sensitivity to the bending motion is obtained if a magnetic field gradient is applied across the crystal during hole b…
Dispersive sensing is a powerful technique that enables scalable and high-fidelity readout of solid-state quantum bits. In particular, gate-based dispersive sensing has been proposed as the readout mechanism for future topological qubits, which can be measured by single electrons tunneling through zero-energy modes. The development of such a readout requires resolving the coherent charge tunneling amplitude from a quantum dot in a Majorana-zero-mode host system faithfully on short time scales. Here, we demonstrate rapid single-shot detection of a coherent single-electron tunneling amplitude be…
Photon number splitting is observed in a transmon coupled to a superconducting quasi-lumped-element resonator in the strong dispersive limit. A thermal population of 5.474 GHz photons at an effective resonator temperature of T = 120mK results in a weak n = 1 photon peak along with the n = 0 photon peak in the qubit spectrum in the absence of a coherent drive on the resonator. Two-tone spectroscopy using independent coupler and probe tones reveals an Autler-Townes splitting in the thermal n = 1 photon peak. The observed effect is explained accurately using the four lowest levels of the dispersi…
Superconducting circuits consisting of a few low-anharmonic transmons coupled to readout and bus resonators can perform basic quantum computations. Since the number of qubits in such circuits is limited to not more than a few tens, the qubits can be designed to operate within the dispersive regime, where frequency detuning are much stronger than coupling strengths. However, scaling up the number of qubits will bring the circuit out of this regime and invalidates current theories. We develop a formalism that allows to consistently diagonalize superconducting circuit hamiltonian beyond dispersiv…
A three-dimensional multimode lumped-element resonator for collective spin manipulation and dispersive readout
Hefei National Research Center for Physical Sciences at the Microscale and School of Physical Sciences, University of Science and Technology of China（中国科学技术大学物理科学学院、合肥微尺度物质科学国家研究中心）；Shanghai Research Center for Quantum Science and CAS Center for Excellence in Quantum Information and Quantum Physics, University of Science and Technology of China（中国科学技术大学、上海量子科学研究与探索中心、中国科学院量子信息与量子物理学前沿卓越创新中心）
The dispersive regime of circuit QED is the main workhorse for todays quantum computing prototypes based on superconducting qubits. Analytic descriptions of this model typically rely on the rotating wave approximation of the interaction between the qubits and resonators, using the Jaynes-Cummings model as starting point for the dispersive transformation. Here we present analytic results on the dispersive regime of the dissipative Rabi model, without taking the rotating wave approximation of the underlying Hamiltonian. Using a recently developed hybrid perturbation theory based on the expansion…
We introduce a frequency-multiplexed readout scheme for superconducting phase qubits. Using a quantum circuit with four phase qubits, we couple each qubit to a separate lumped-element superconducting readout resonator, with the readout resonators connected in parallel to a single measurement line. The readout resonators and control electronics are designed so that all four qubits can be read out simultaneously using frequency multiplexing on the one measurement line. This technology provides a highly efficient and compact means for reading out multiple qubits, a significant advantage for scali…
Optomechanical system with tunable dissipative and dispersive couplings
State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Opto-Electronics, Shanxi University（山西大学光电研究所量子光学与量子光学器件国家重点实验室）；Collaborative Innovation Center of Extreme Optics, Shanxi University（山西大学极端光学协同创新中心）
We present a superconducting device that realizes the sequential measurement of a transmon qubit. The device disables common limitations of dispersive readout such as Purcell effect or transients in the cavity mode by turning on and off the coupling to the measurement channel on demand. The qubit measurement begins by loading a readout resonator that is coupled to the qubit. After an optimal interaction time with negligible loss, a microwave pump releases the content of the readout mode by upconversion into a measurement line in a characteristic time as low as 10~ns, which is 400 times shorter…
Hybrid devices based on the superconducting qubits have emerged as a promising platform for controlling the quantum states of macroscopic resonators. The nonlinearity added by a qubit can be a valuable resource for such control. Here we study a hybrid system consisting of a mechanical resonator longitudinally coupled to a transmon qubit. The qubit readout can be done by coupling to a readout mode like in c-QED setup. The coupling between the mechanical resonator and transmon qubit can be implemented by modulation of the SQUID inductance. In such a tri-partite system, we analyze the steady-stat…
Parity measurement is a key step in many entanglement generation and quantum error correction schemes. We propose a protocol for non-destructive parity measurement of two remote qubits, i.e., macroscopically separated qubits with no direct interaction. The qubits are instead dispersively coupled to separate resonators that radiate to shared photodetectors. The scheme is deterministic in the sense that there is no fundamental bound on the success probability. Compared to previous proposals, our protocol addresses the scenario where number resolving photodetectors are available but the qubit-res…
In a Rabi oscillation experiment with a superconducting qubit we show that a visibility in the qubit excited state population of more than 90 % can be attained. We perform a dispersive measurement of the qubit state by coupling the qubit non-resonantly to a transmission line resonator and probing the resonator transmission spectrum. The measurement process is well characterized and quantitatively understood. The qubit coherence time is determined to be larger than 500 ns in a measurement of Ramsey fringes.
We develop a time-dependent Schrieffer-Wolff-Lindblad perturbation theory to study effective interactions for driven open quantum systems. The starting point of our analysis is a given Lindblad equation, based on which we obtain an effective (averaged) map that describes the renormalization of both the Hamiltonian and collapse operators due to the drive. As a case study, we apply this method to the dispersive readout of a transmon qubit and derive an effective disperive map that describes measurement-induced dephasing and Stark shift for the transmon. The effective map we derive is completely …
We generalize the dispersive theory of the Jaynes-Cummings model beyond the frequently employed rotating-wave approximation (RWA) in the coupling between the two-level system and the resonator. For a detuning sufficiently larger than the qubit-oscillator coupling, we diagonalize the non-RWA Hamiltonian and discuss the differences to the known RWA results. Our results extend the regime in which dispersive qubit readout is possible. If several qubits are coupled to one resonator, an effective qubit-qubit interaction of Ising type emerges, whereas RWA leads to isotropic interaction. This impacts …
The resonator-induced phase gate is a two-qubit operation in which driving a bus resonator induces a state-dependent phase shift on the qubits equivalent to an effective $ZZ$ interaction. In principle, the dispersive nature of the gate offers flexibility for qubit parameters. However, the drive can cause resonator and qubit leakage, the physics of which cannot be fully captured using either the existing Jaynes-Cummings or Kerr models. In this paper, we adopt an ab-initio model based on Josephson nonlinearity for transmon qubits. The ab-initio analysis agrees well with the Kerr model in terms o…
We describe transmon qubit dynamics in the presence of noise introduced by an impedance-matched resistor ($50\,\mathrmΩ$) that is embedded in the qubit control line. To obtain the time evolution, we rigorously derive the circuit Hamiltonian of the qubit, readout resonator and resistor by describing the latter as an infinite collection of bosonic modes through the Caldeira-Leggett model. Starting from this Jaynes-Cummings Hamiltonian with inductive coupling to the remote bath comprised of the resistor, we consistently obtain the Lindblad master equation for the qubit and resonator in the disper…
We consider the dynamics of the photon states in distant resonators coupled to a common bus resonator at different positions. The frequencies of distant resonators from a common bus resonator are equally detuned. These frequency detunings are kept larger than the coupling strengths of each resonator to the common bus resonator to satisfy the dispersive interaction regime. In the dispersive regime, we show that the time dynamics of the system evolve to an arbitrary W-type state in a single step at various interaction times. Our results show that a one-step generation of arbitrary W-type states …
Spectral properties of a quantum circuit are efficiently read out by monitoring the resonance frequency shift it induces in a microwave resonator coupled to it. When the two systems are strongly detuned, theory attributes the shift to an effective resonator capacitance or inductance that depends on the quantum circuit state. At small detuning, the shift arises from the exchange of virtual photons, as described by the Jaynes-Cummings model. Here we present a theory bridging these two limits and illustrate, with several examples, its necessity for a general description of quantum circuits readou…
Quantum state tomography is an important tool in quantum information science for complete characterization of multi-qubit states and their correlations. Here we report a method to perform a joint simultaneous read-out of two superconducting qubits dispersively coupled to the same mode of a microwave transmission line resonator. The non-linear dependence of the resonator transmission on the qubit state dependent cavity frequency allows us to extract the full two-qubit correlations without the need for single shot read-out of individual qubits. We employ standard tomographic techniques to recons…
We demonstrate enhancement of the dispersive frequency shift in a coplanar waveguide resonator induced by a capacitively-coupled superconducting flux qubit in the straddling regime. The magnitude of the observed shift, 80 MHz for the qubit-resonator detuning of 5 GHz, is quantitatively explained by the generalized Jaynes-Cummings model which takes into account the contribution of the qubit higher energy levels. By applying the enhanced dispersive shift to the qubit readout, we achieved 90% contrast of the Rabi oscillations which is mainly limited by the energy relaxation of the qubit.
In this article, an analytical description is presented based on the master equation. This master equation is formed from the system of superconducting phase qubit which is coupled to a torsional resonator and damped by a dispersive reservoir. An analytical approach for searching of some physical phenomena on the qubit system is presented, such as qubit inversion, purity and negativity. In addition, these phenomena are discussed for the resonance and off-resonance cases for many different initial states. From computational results, it is found that the mentioned phenomena depend on the dispers…
Developing fast and accurate control and readout techniques is an important challenge in quantum information processing with semiconductor qubits. Here, we study the dynamics and the coherence properties of a GaAs/AlGaAs double quantum dot (DQD) charge qubit strongly coupled to a high-impedance SQUID array resonator. We drive qubit transitions with synthesized microwave pulses and perform qubit readout through the state dependent frequency shift imparted by the qubit on the dispersively coupled resonator. We perform Rabi oscillation, Ramsey fringe, energy relaxation and Hahn-echo measurements …
We combine the ideas of qubit encoding and dispersive dynamics to enable robust and easy quantum information processing (QIP) on paired superconducting charge boxes sharing a common bias lead. We establish a decoherence free subspace on these and introduce universal gates by dispersive interaction with a LC resonator and inductive couplings between the encoded qubits. These gates preserve the code space and only require the established local symmetry and the control of the voltage bias.
Superconducting electrical circuits can be used to study the physics of cavity quantum electrodynamics (QED) in new regimes, therefore realizing circuit QED. For quantum information processing and quantum optics, an interesting regime of circuit QED is the dispersive regime, where the detuning between the qubit transition frequency and the resonator frequency is much larger than the interaction strength. In this paper, we investigate how non-linear corrections to the dispersive regime affect the measurement process. We find that in the presence of pure qubit dephasing, photon population of the…
We have performed spectroscopic measurements of a superconducting qubit dispersively coupled to a nonlinear resonator driven by a pump microwave field. Measurements of the qubit frequency shift provide a sensitive probe of the intracavity field, yielding a precise characterization of the resonator nonlinearity. The qubit linewidth has a complex dependence on the pump frequency and amplitude, which is correlated with the gain of the nonlinear resonator operated as a small-signal amplifier. The corresponding dephasing rate is found to be close to the quantum limit in the low-gain limit of the am…
A comparison of different master equations for driven-dissipative dynamics in composite quantum systems: Dispersive readout in structured electromagnetic environments
We examine the non-stationary evolution of a coupled qubit-transmission line-resonator system coupled to an external drive and the resonator environment. By solving the equation for a non-stationary resonator field, we determined the requirements for a single-shot non-destructive dispersive measurement of the phase qubit state. Reliable isolation of the qubit from the "electromagnetic environment" is necessary for a dispersive readout and can be achieved if the whole system interacts with the external fields only through the resonator that is weakly coupled to the qubit. A set of inequalities …
We have studied the possibility of a single-shot non-demolition measurement of a superconducting qubit using a microstrip SQUID amplifier (MSA). The Johnson noise generated by all resistors in the MSA is taken into consideration. We show that a single-shot non-demolition measurement is possible with six photons in the measurement resonator. For a phase qubit inductively coupled to a measurement resonator we have obtained the expression for the mutual inductance required for measurement of the qubit state.
We consider the direct three-qubit parity measurement scheme with two measurement resonators, using circuit quantum electrodynamics to analyze its functioning for several different types of superconducting qubits. We find that for the most common, transmon-like qubit, the presence of additional qubit-state dependent coupling terms of the two resonators hinders the possibility of performing the direct parity measurement. We show how this problem can be solved by employing the Tunable Coupling Qubit (TCQ) in a particular designed configuration. In this case, we effectively engineer the original …
The quantum state of a superconducting qubit nonresonantly coupled to a transmission line resonator can be determined by measuring the quadrature amplitudes of an electromagnetic field transmitted through the resonator. We present experiments in which we analyze in detail the dynamics of the transmitted field as a function of the measurement frequency for both weak continuous and pulsed measurements. We find excellent agreement between our data and calculations based on a set of Bloch-type differential equations for the cavity field derived from the dispersive Jaynes-Cummings Hamiltonian inclu…
We demonstrate dispersive readout of the spin of an ensemble of Nitrogen-Vacancy centers in a high-quality dielectric microwave resonator at room temperature. The spin state is inferred from the reflection phase of a microwave signal probing the resonator. Time-dependent tracking of the spin state is demonstrated, and is employed to measure the T1 relaxation time of the spin ensemble. Dispersive readout provides a microwave interface to solid state spins, translating a spin signal into a microwave phase shift. We estimate that its sensitivity can outperform optical readout schemes, owing to th…
Dark state as a measurable state by a dispersive readout without a Purcell limit
National Chung Hsing University（中兴大学）；Feng Chia University（逢甲大学）；Research Center for Critical Issues, Academia Sinica（中央研究院关键问题研究中心）；National Changhua University of Education（国立彰化师范大学）
We present experimental results on a dispersive scheme for reading out a Josephson phase qubit. A capacitively shunted dc-SQUID is used as a nonlinear resonator which is inductively coupled to the qubit. We detect the flux state of the qubit by measuring the amplitude and phase of a microwave pulse reflected from the SQUID resonator. By this low-dissipative method, we reduce the qubit state measurement time down to 25 microseconds, which is much faster than using the conventional readout performed by switching the SQUID to its non-zero dc voltage state. The demonstrated readout scheme allows f…
Mechanical resonators are emerging as an important new platform for quantum science and technologies. A large number of proposals for using them to store, process, and transduce quantum information motivates the development of increasingly sophisticated techniques for controlling mechanical motion in the quantum regime. By interfacing mechanical resonators with superconducting circuits, circuit quantum acoustodynamics (cQAD) can make a variety of important tools available for manipulating and measuring motional quantum states. Here we demonstrate direct measurements of the phonon number distri…
